The Energon Pub

News Credits: 3 · Thu Mar 05, 2009 4:47 pm

So I found this thing at our local dollar store today, available in red and blue, a KO of the Machine Wars/Robot Masters Mirage mold. There's at least a dozen of them in there... I might get more for repaint fodder.

Plastic quality ain't too bad, no light piping for the eyes, though.

Fri Mar 06, 2009 1:00 pm

Kidlockdmh wrote:does anyone know where I can find the high quality g1 knockoffs of the blue bluestreak, cyclonus or scourge? PM me with any info, it is much appreciated. thanks

Might have better luck asking about them in this thread:

viewtopic.php?f=4&t=39063

Heck, the info you're looking for might be in there, too.

Sat Mar 07, 2009 9:25 am

Knock offs eh (yes I am canadian)

I've noticed quite a few of those aroud here (don't have any pics though, I'd get in trouble for taking snap shots in a store)

Actually I bought a ruination/Bruticus set at a county fair, and then I went to this one dallar stoer that I heard was selling transformers, thing was they were basically minicon moulds but were the size of deluxe figures, now if that ain't a cheap knockoff I don't know what is

News Credits: 49 · Sat Mar 07, 2009 9:48 am

Rodimus_Major86 wrote:Knock offs eh (yes I am canadian)

I've noticed quite a few of those aroud here (don't have any pics though, I'd get in trouble for taking snap shots in a store)

Actually I bought a ruination/Bruticus set at a county fair, and then I went to this one dallar stoer that I heard was selling transformers, thing was they were basically minicon moulds but were the size of deluxe figures, now if that ain't a cheap knockoff I don't know what is

Do they look like these guys?

Sat Mar 07, 2009 12:54 pm

Scaleface wrote:
Rodimus_Major86 wrote:Knock offs eh (yes I am canadian)

I've noticed quite a few of those aroud here (don't have any pics though, I'd get in trouble for taking snap shots in a store)

Actually I bought a ruination/Bruticus set at a county fair, and then I went to this one dallar stoer that I heard was selling transformers, thing was they were basically minicon moulds but were the size of deluxe figures, now if that ain't a cheap knockoff I don't know what is

Do they look like these guys?

Yep those are the ones, then there was also bad repaints of the deluxe Armada Optimus, and two horrible over sized repaints of RID and beastwars Dragon Megatron

News Credits: 8 · Thu Mar 12, 2009 3:10 am

I've just recently bought these (at last!!!)

Accurate Classic Astrotrain

Accurate Classic Starscream

Both

Thu Mar 12, 2009 9:12 pm

How Big?

Mind putting them near some legit classics/Universe's?

News Credits: 8 · Fri Mar 13, 2009 2:54 am

Primus_feather wrote:How Big?

Mind putting them near some legit classics/Universe's?

Sorry but I've send all my collection to my folk's home, my brothers and I gathered them there. If I have a chance I post it

News Credits: 5 · Fri Mar 13, 2009 6:05 am

hmm more screws on his weapons and no elbows, besides thats starscream looks like his classics/universe self too bad i can't find his knockoff around :-?

Sun Mar 15, 2009 4:46 am

I have those for quite a while now (check my photobucket album for pics). They're a set with Cybertron Sideways, Thundercracker & Override. The size seems to be on par with original Deluxes and although missing some gimmick/articulations (Planet Keys gimmick doesn't work/Starscream's missing elbows) the quality is very good..

News Credits: 8 · Sun Mar 15, 2009 5:20 am

nicemecha wrote:I have those for quite a while now (check my photobucket album for pics). They're a set with Cybertron Sideways, Thundercracker & Override. The size seems to be on par with original Deluxes and although missing some gimmick/articulations (Planet Keys gimmick doesn't work/Starscream's missing elbows) the quality is very good..

Thanx bout the size. I'm satisfied with both of them, a decent KO. Ready for another flood of KO after the 2nd movie came out (in my place, it started shortly before the 1st movie)

Sat Mar 28, 2009 8:11 pm

Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

News Credits: 8 · Sat Mar 28, 2009 11:06 pm

PsychoSaber1981 wrote:Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

I think this KO is from Taiwan. It's Star Saber from the Victory series. He combines with Victory Leo to form Victory Saber...

Sat Mar 28, 2009 11:15 pm

ZoneDaiatlas wrote:
PsychoSaber1981 wrote:Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

I think this KO is from Taiwan. It's Star Saber from the Victory series. He comebines with Victory Leo to form Victory Saber...

Can you speak on the quality?

News Credits: 8 · Sun Mar 29, 2009 9:42 am

PsychoSaber1981 wrote:
ZoneDaiatlas wrote:
PsychoSaber1981 wrote:Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

I think this KO is from Taiwan. It's Star Saber from the Victory series. He comebines with Victory Leo to form Victory Saber...

Can you speak on the quality?

I think it's the same one I bought long time ago but I can't be sure without the packaging. IF they're the same, the quality is very good and accurate

News Credits: 8 · Sun Mar 29, 2009 9:44 am

PsychoSaber1981 wrote:
ZoneDaiatlas wrote:
PsychoSaber1981 wrote:Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

I think this KO is from Taiwan. It's Star Saber from the Victory series. He comebines with Victory Leo to form Victory Saber...

Can you speak on the quality?

I have the KO of Dai Atlas Z from Taiwan and I can tell you the quality is excellent for a KO. Now if this KO Star Saber is from Taiwan then I can tell you the it's not made of cheap plastic and that you are getting an excellent KO...

Sun Mar 29, 2009 2:19 pm

ZoneDaiatlas wrote:
PsychoSaber1981 wrote:
ZoneDaiatlas wrote:
PsychoSaber1981 wrote:Looking for information about this KO:
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0295613153

I think this KO is from Taiwan. It's Star Saber from the Victory series. He comebines with Victory Leo to form Victory Saber...

Can you speak on the quality?

I have the KO of Dai Atlas Z from Taiwan and I can tell you the quality is excellent for a KO. Now if this KO Star Saber is from Taiwan then I can tell you the it's not made of cheap plastic and that you are getting an excellent KO...

That is great news! I have been trying to find any info I can on this
but have found nothing. The main thing that stands out is every KO I find pics of has red feet but this one has blue.
Thanks for your help I really appreciate it.

News Credits: 1 · Tue Mar 31, 2009 8:25 am

parkzz wrote:Transformers Movie Leader Megatron
*snip*
Read more : Transformers Movie Leader Megatron

parkzz, this is the knock-off Transformers toys thread. That looks to be a legit Movie Megatron from your pics and link.

Tue Mar 31, 2009 10:42 am

Hah, well, he could be saying that Movie Megatron is a knock off of the original... :lol:

News Credits: 1 · Tue Mar 31, 2009 11:35 am

Does anyone know if KO seekers and Jetfires are in the US? I've tried every big lots I can find and I can't seem to find them. I really want to build an "army"

News Credits: 8 · Tue Mar 31, 2009 3:59 pm

original sin wrote:Does anyone know if KO seekers and Jetfires are in the US? I've tried every big lots I can find and I can't seem to find them. I really want to build an "army"

Are you talking about the old G1 KO Seekers?

Wed Apr 01, 2009 1:00 am

I was looking over at YaHobby that sells some Unofficial Reissues of some popular G1 figures and was wondering if the Dinobots are pretty good quality. I might just go for a Swoop since he is the only one missing in my lot....other than a G1 Snarl (had G2 since I was young).

I am also thinking about the G1 Constructicons as well. If anyone has any of these figures what are you opinions on them?

News Credits: 8 · Wed Apr 01, 2009 7:33 am

dabattousai wrote:I was looking over at YaHobby that sells some Unofficial Reissues of some popular G1 figures and was wondering if the Dinobots are pretty good quality. I might just go for a Swoop since he is the only one missing in my lot....other than a G1 Snarl (had G2 since I was young).

I am also thinking about the G1 Constructicons as well. If anyone has any of these figures what are you opinions on them?

I'm not sure bout the dinobot but IMO, most of the G1 gestalts, if not good, has decent quality. But still, I'm not sure if we're talking bout the same product

Wed Apr 01, 2009 11:29 pm

I'm talking about this one:

http://www.yahobby.com/classics-transfo ... -p-33.html

and this one:

http://www.yahobby.com/classics-transfo ... p-120.html

News Credits: 1 · Thu Apr 02, 2009 9:44 pm

ZoneDaiatlas wrote:
original sin wrote:Does anyone know if KO seekers and Jetfires are in the US? I've tried every big lots I can find and I can't seem to find them. I really want to build an "army"

Are you talking about the old G1 KO Seekers?

Oh, I should have specified. I meant Classics