The Energon Pub

News Credits: 25 · by **SW's SilverHammer** » Thu Aug 13, 2015 5:49 am

I'ma say September's figure is going to be Krok due to MTMTE #35 coming out in the same month and focusing on the scavengers. If that's not the case, you guy's, it was totes changed to spite me (sarcasm).

by **Lbsammills51** » Thu Aug 13, 2015 10:28 am

TF_JW wrote:The third figure started showing up around the first of this month. So the fourth would more than likely do the same next month.

So does that mean people paying via installments won't be charged for the third installment until next month?

News Credits: 33 · by **TF_JW** » Thu Aug 13, 2015 12:02 pm

There will be an email update coming up shortly. It will give details about the third installment including when they will start charging it.

News Credits: 33 · by **TF_JW** » Fri Aug 14, 2015 5:26 pm

Speaking of the email, here it is!

Hello Everyone,

This is going out to everyone who has ordered the TFSS 3.0. We hope that you are enjoying your first three figures. The fourth figure will begin shipping out later this month and we look forward to hearing what you think of him.

As you know, earlier this week we opened up pre-orders for the TFSS 4.0. We understand that there has been some concern in regard to the overlap in billing for anyone who wants to purchase the TFSS 4.0 and also selected the installment payment plan for the TFSS 3.0. To help alleviate potential payment conflicts, we have pushed back the final installment payment for the TFSS 3.0 to Sept 14th.

In addition, if you purchased the subscription by installment, please verify that your credit card information and billing/shipping address are correct in the system. After three failed attempts to bill, your FSS subscription will be cancelled and we know that everyone wants to be sure to receive the mystery 7th figure upon the final shipment. In addition, each credit card attempt has an additional admin processing fee added to it. So, for the installment purchases, please log in and check your credit card BEFORE Sept 14th.

In fact, why wait? It only takes a minute. Log in here to check your account. Click on "My Account" after you log in to edit any of your address and/or payment info.

Enjoy the rest of this Summer weather while you can!

Brian

News Credits: 7 · by **Zeedust** » Fri Aug 14, 2015 10:03 pm

SW's SilverHammer wrote:I'ma say September's figure is going to be Krok due to MTMTE #35 coming out in the same month and focusing on the scavengers.

Wait, I thought Scavenger was dead. :-D

News Credits: 25 · by **SW's SilverHammer** » Fri Aug 14, 2015 10:31 pm

Nemesis Primal wrote:
SW's SilverHammer wrote:I'ma say September's figure is going to be Krok due to MTMTE #35 coming out in the same month and focusing on the scavengers.

Wait, I thought Scavenger was dead.

Scavenger's okay. Scrapper's dead.

by **Lbsammills51** » Sat Aug 15, 2015 12:39 am

TF_JW wrote:Speaking of the email, here it is!

Hello Everyone,

This is going out to everyone who has ordered the TFSS 3.0. We hope that you are enjoying your first three figures. The fourth figure will begin shipping out later this month and we look forward to hearing what you think of him.

As you know, earlier this week we opened up pre-orders for the TFSS 4.0. We understand that there has been some concern in regard to the overlap in billing for anyone who wants to purchase the TFSS 4.0 and also selected the installment payment plan for the TFSS 3.0. To help alleviate potential payment conflicts, we have pushed back the final installment payment for the TFSS 3.0 to Sept 14th.

In addition, if you purchased the subscription by installment, please verify that your credit card information and billing/shipping address are correct in the system. After three failed attempts to bill, your FSS subscription will be cancelled and we know that everyone wants to be sure to receive the mystery 7th figure upon the final shipment. In addition, each credit card attempt has an additional admin processing fee added to it. So, for the installment purchases, please log in and check your credit card BEFORE Sept 14th.

In fact, why wait? It only takes a minute. Log in here to check your account. Click on "My Account" after you log in to edit any of your address and/or payment info.

Enjoy the rest of this Summer weather while you can!

Brian

I am glad that the simultaneous 3.0/4.0 payment issue is being addressed. Though I still think it could've been avoided in the first place, at least the concern voiced by myself and some others isn't being met with just a shrug of shoulders. I'm glad I now have the option, budgeting-wise, to swing both.

News Credits: 650 · by **ScottyP** » Fri Aug 28, 2015 2:34 pm

Multiple Seibertronians have reported the arrival of the fourth figure in the Transformers Collectors' Club Figure Subscription Service 3.0 today, which was expected to arrive any day now thanks to shipping notices being received on Wednesday. Courtesy grimdragon2001 we have images to share of the next figure that will be arriving to subscribers.

Based on feedback from prior Figure Subscription Service news stories, we're putting this one behind a spoiler warning. If you want to be surprised when you get to your mailbox in the next few days, turn back now!

S
P
O
I
L
E
R

W
A
R
N
I
N
G

The fourth figure to arrive is: Tarantulas!

As with other versions of the Reveal the Shield Wreck-Gar mold that have been released, remember to handle certain parts of this figure with care to avoid breakage.

Sign up for next year's subscription is going on now over at the Transformers Collectors' Club website, so be sure to head there soon to secure next year's set of figures. Only days remain! Keep it right here at Seibertron.com for all the latest news in the universe of Transformers.

News Credits: 3 · by **DedicatedGhostArt** » Fri Aug 28, 2015 3:43 pm

That Tarantulas looks amazing, even if he doesn't turn into a spider. :saint:

News Credits: 174 · by **Hellscream9999** » Fri Aug 28, 2015 3:52 pm

Awesome

News Credits: 402 · by **Mkall** » Fri Aug 28, 2015 5:12 pm

My main decision will be: should those spider things be left as his drones, or should he have his claws?

choices, choices...

by **MisterNewUzer** » Fri Aug 28, 2015 5:16 pm

On the odd chance that anyone is more Classics minded than BW, I have a TFSS 1.0 Breakdown I could trade for Tarantulas. PM me, and if you need feedback I have plenty at TFW

News Credits: 1 · by **durroth** » Fri Aug 28, 2015 7:04 pm

Now we just have Krok, Starscream, and our mystery figure. Which is probably Nightracer, but I had this horrible nightmare where it was a neon orange legends megatron repaint that somehow rides on starscream's back.

News Credits: 4838 · by **william-james88** » Fri Aug 28, 2015 8:23 pm

Fellow Seibertronian grimdragon2001 has given us a review of the 4th figure to be released as part of the Subspriction Service 3.0. It can be found below:

S
P
O
I
L
E
R

grimdragon2001 wrote:

Taking a look at the latest TFSS figure Tarantulas

by **Andrius** » Fri Aug 28, 2015 11:24 pm

Mkall wrote:My main decision will be: should those spider things be left as his drones, or should he have his claws?

choices, choices...

Oh, so THAT's what those are. I gather they don't attach to the bike, huh? Are they entirely new pieces or retooled from something else?

News Credits: 456 · by **Sabrblade** » Fri Aug 28, 2015 11:26 pm

Andrius wrote:
Mkall wrote:My main decision will be: should those spider things be left as his drones, or should he have his claws?

choices, choices...

Oh, so THAT's what those are. I gather they don't attach to the bike, huh? Are they entirely new pieces or retooled from something else?

Redecos of Ida, the Arms Micron that came with Airachnid.

News Credits: 1 · by **durroth** » Sat Aug 29, 2015 12:26 am

she just wants B2-senpai to notice her.

News Credits: 1 · by **Bumblevivisector** » Sat Aug 29, 2015 1:04 am

So, refresh my memory, is the main break point on this mold the fingers snapping off if you actually have him hold his axe, like with the ROTF Bludgeon mold? Cuz I just put it in his right hand once, and already there are stress marks. I'm worried that even pegging in the Spiders will do further damage. Anyone advise removing and boiling the hands?

I'd better check on all my actual Wreck-Gar's and Junkheaps; I might've left some armed!

News Credits: 1 · by **durroth** » Sat Aug 29, 2015 3:19 am

The main break point on the mold is the handlebars snapping off because A)you manually transform them instead of auto-transforming them or B)they're too tight for even autotransforming. The hand stress marks are a known issue, but I've been searching and it seems like there aren't many reports of broken hands. The spiders seem to peg in without stressing the hands.

News Credits: 33 · by **TF_JW** » Sat Aug 29, 2015 5:07 am

Have there been any issues with the handle bars since they've done the remold after Wreck-Gar's initial release?

News Credits: 1 · by **durroth** » Sat Aug 29, 2015 5:14 am

TF_JW wrote:Have there been any issues with the handle bars since they've done the remold after Wreck-Gar's initial release?

I think the general consensus is cut them off, it's the only way to be sure.

News Credits: 33 · by **TF_JW** » Sat Aug 29, 2015 5:27 am

Still? Hmm. The remold cut them down pretty far already.

I really can't think of anyone Junkheap and later who I had the same concerns as Wreck-Gar when converting them.

News Credits: 3 · by **Starsaber468** » Sat Aug 29, 2015 8:43 am

The same guy who was the first to have a mp star saber review on youtube (OptimusPrimeSG) put up a review of the new (takara) masterpiece bluestreak plus in the comments he said skmething taht could mean an another repaint of the figure

Website · by **Flux Convoy** » Tue Sep 01, 2015 7:06 pm

I have every version of the Wreck Gar mold. Multiples of all the domestics and Botcon versions. No issues or breakage with ANY of them. This figure is gorgeous. So happy to see that the Micron paint apps made it after all. I do wish they had the little transparent gem bits though. My only complaint.

News Credits: 461 · by **mooncake623** » Wed Sep 02, 2015 9:22 am

The Official Transformers Collectors’ Club posted via their Facebook page, some new character artwork of Bludgeon and Impactor that will be on their tech specs! Check out the image we've mirrored below and don't forget forget, only 1 day left to order your Subscription Service 4.0 which you can do so here.

Remember keep your optics tuned to Seibertron.com for the latest in news and updates!