The Energon Pub

News Credits: 1 · Wed Mar 17, 2010 5:32 pm

I'm just after some tips from whoever would be kind enough to help.

What's the best way to paint details or small areas for a guy who doesn't have the steadiest of hands with a brush? Would those special Gundam marker pens do the trick or is there anything else?

Thanks for your time.

News Credits: 1 · Fri Apr 16, 2010 10:23 am

How is the best way to tint the windshield and wings from the g1 Wheeljack figure? I am wanting to custom repaint a junker one into a custom Marlboro Diaclone Wheeljack. It's been suggested I use Tamyica Mica Blue Spray paint for the close match of the original. Also how do I alter the head to match Marlboro Wheeljack? ANy help greatly appreciated!

Tue Aug 03, 2010 11:58 pm

What do you guys recommend for paint, Enamel or Acrylics? Is it possible to use both on the same figure? Also, will any of these paints have any harmful effects on the plastic itself? Like maybe not in a year but in like 10 maybe?

News Credits: 2 · Wed Aug 04, 2010 7:07 pm

I usually use enamel, I think it covers better and the colors are nicer. I'll use acrylic if I'm feeling lazy (water clean-up is way easier than using thinner), or if I need to prime PVC parts. You can use both at the same time, though acrylic sometimes won't adhere well over enamel paint. As long as you use paint for models (either enamel or acrylic) you shouldn't have any problems with damage to the plastic. I've got models (same plastic as most toys) I did in the 90s that are still fine.

Thu Aug 19, 2010 3:21 pm

Has anyone ran into a problem where you like the paintjob you gave them but something's not according to the design in mind? If so how do you fix it? On a small note it's good to know I'm not the only one who's ever repainted a transformer. The figure I need to know this for is 2007 Night Watch Optimus Prime Leader Class. I painted him like a C.F.I. truck and the letters are in the wrong place. On the sides above the fuel tanks is where they are supposed to be, but instead I stupidly put them on the hood and roof. A giant "C" where the hjead comes up is too funny and demeaning to Prime. :BANG_HEAD:

Mon Sep 20, 2010 7:29 pm

EDIT

Mon Dec 20, 2010 3:36 pm

Will someone please tell me what I need and how I should paint a transformer. I just can't find the right stuff :BOOM:

! In the name of Megatron, tell me

!

News Credits: 2 · Thu Dec 23, 2010 11:24 pm

LordOfAnnihilation wrote:Will someone please tell me what I need and how I should paint a transformer. I just can't find the right stuff ! In the name of Megatron, tell me !

Check out my post about halfway up this page.

Wed Feb 23, 2011 5:26 pm

I've been admiring the detail on the optimus prime wedding topper repaint. I've got some painting experience so I could work out whether to ink or paint up from a dark layer, whatever. But what do you guys think is the best way to achieve that cool detailed effect with the dark lines?

Mon Jun 27, 2011 7:22 pm

I've been reading alot on painting before I actually start, but I have a question I haven't seen answered. I don't want to have to take apart my figures to paint them, as for most I just want to add details. Several tutorials have said I should be fine on that. My question pertains to sealant. If I wish to use sealant while the figure is assembled and in vehicle mode, will it harden so as to prevent transformation? I've read that rubbery stuff like tires and some heads are not to be hit with sealant, but my concern is the rest and being able for it to actually MOVE after it drys.

Thank you for your time.

News Credits: 2 · Mon Jun 27, 2011 8:24 pm

Exileman wrote:I've been reading alot on painting before I actually start, but I have a question I haven't seen answered. I don't want to have to take apart my figures to paint them, as for most I just want to add details. Several tutorials have said I should be fine on that. My question pertains to sealant. If I wish to use sealant while the figure is assembled and in vehicle mode, will it harden so as to prevent transformation? I've read that rubbery stuff like tires and some heads are not to be hit with sealant, but my concern is the rest and being able for it to actually MOVE after it drys.

Thank you for your time.

Best bet would be to mask off the parts of the figure you don't want to spray. As long as you don't go crazy with the sealant, you shouldn't have a problem with moving parts afterwards.
You could also try brushing the sealant instead (Testors makes brushable gloss and dull coat, as well as thinner), but I've had mixed success with them (lacquers can lift enamel, even when cured). Future, or any other floor polish, makes a good alternative, though you're locked into a glossy finish.

Sat Jul 02, 2011 7:12 pm

I got a quick Q. I know about painting and all as I use to paint Warhammer figs. What I would like to know 1st is if the paint for the Warhammer figs will work on TF figs?

What I'm trying to do is I just got my BK Ironhide today and I want to be able to give him a custom paint job. Just wasn't sure what type of paint would stick to the plastic of this toy. Not sure if I want to just spray paint him to get a primer going or just paint the areas I want to paint. Any thoughts??

P.S.

I need to fix my LC Ironhide too as he came with a few nicks in his paint.

News Credits: 2 · Sat Jul 02, 2011 9:59 pm

Should work. Unless I'm trying to paint a lighter shade over a darker one, I don't bother with primer.

Sat Jul 02, 2011 10:10 pm

Skyfire77 wrote:Should work. Unless I'm trying to paint a lighter shade over a darker one, I don't bother with primer.

Ok. Then I'll just do that. Also, has anyone here brought a fig with them to a hobby shop to be able to match the paint of something that is on said fig? I'm thinking of doing this so I can buy the right color and what not.

News Credits: 2 · Sun Jul 03, 2011 9:51 am

If I'm looking for a particular color, I usually match it to a paint line's online color chart. Then again, I'm usually ordering the paint online too, so YMMV.

News Credits: 6 · Sat Jul 16, 2011 3:34 pm

I don't think any of you guys will read this, but if you do PLEASE PM ME so I can save it in my mailbox for future use!

OK. My question is, I want to make minor paint aps, nothing major. Blue Mullet on Topspin, some silver aps on Bumblebee's body, like his torso and toes, And darken the light greys on Crankcase, That sort of thing. Exactly how would I go about doing this? Furthermore, any place OFFLINE that I Can buy paints from? I'll be back home in a few months and theres a hobby shop up the street, but until than, no hobby shops

There are a few figures I want to Fully repaint, Like a "Certain Custom" I'll share with you all when it's done. I just want to know... Good paint, were to buy, how to apply, and also, a good glue! My "Secret" Figure's chest peice won't stay on. He's done using mostely animated prowls parts. An answer to any of this would be nice.

also, whats a good, like redneck cheap way to simulate "Battle Damage" outside of power tools?

Also, my most important question. Is there any type of paint you can use that WILL NOT COME OFF if its rubbed against to much? I Need it if it exists. that, or a tutorial on how to make my paint "Scratch Proof"

can I pick up paints that can be used at local crafts stores? There are no hobby shops were I'm at right now, as previously stated. All Ive got is a paint brush, a few figures I want to customize, a dollar store up the street, and a crapload of questions, as you all can see. I want to paint and mod my "Secret" Figure to perfection before showing it off, and I need serious help.....

wow, in retrospect, that was rather long winded to say the least...... sorry bout' that, I just really want to get into customizing, and Transformers is the coolest thing to customize! Iv'e modded stuff, but not like this guy i'm making right now! He's my own personal transformer, one of a kind, and I don't wanna f'ck it up! I Don't have any duplicates of the parts I'm using for him either......

Please help
the long winded stuggling artist:
BeastProwl

News Credits: 2 · Sat Jul 16, 2011 4:27 pm

PMed

Mon Jul 18, 2011 1:54 pm

Skyfire77 wrote:
Gutter Bunny wrote:
JHand wrote:Hi. Sorry that I haven't been logged on here for over a year. Anyway, silly question: Does anybody use Reeves Acrylic Paints? I purchased a set of 12 some time ago and am in the middle of a second repaint. Furthermore, what brand of paints do some of you use for ya repaints?

Just looking for some feedback

I personally have been messing around with Tamiya acrylics. I havn't had any issue with them, and they clean up unbelievably easy.

I've heard great things about the Mr Color line from Gunze Sangyo. Unfortunately, my local hobby shops do not keep stock of them. When i inquired with one of the owners, they said that they are hard to keep in stock because Gunze only ships to the United States "once or twice". I'm not sure if he meant once or twice a year, once or twice a month, once or twice ever six months etc.

I'd be interested in trying some enamels but i haven't a clue how to go about cleaning them up. If anybody would like to shed some light on that for me it would be much appreciated.

Gunze stopped shipping to the US early last year, saying it wasn't profitable anymore. Supposedly they restarted recently, but they're still hard to find in brick-and-mortar stores. There's a few online stores that carry it.
Personally, I've only ever used Testors on my models and 'Formers. Testors has their own thinner/brush cleaner for enamel. Enamels are a little trickier to use, you need to have plenty of ventilation when you're using them (otherwise... ), but I like the coverage better. Metallic colors especially look more realistic.

I like Testor's enamel too. And ventilation is DEFINITELY needed. Do you use any sort of Primer? Anyone? I may not have gone far enough in the thread to see this answered already, so if it was, I apologize in advance.

News Credits: 2 · Mon Jul 18, 2011 7:45 pm

Unless I'm painting light over dark, florescents, or if I need to seal PVC parts (they do not react well to enamel paint), I skip priming. Between washing the parts and my usual light sanding, I don't have problems with "tooth".

Mon Jul 18, 2011 7:51 pm

Got it. Soap and water. Light sand. Paint. Thanks.

News Credits: 6 · Tue Jul 19, 2011 9:28 am

Dead Metal wrote:Got tips or tricks for kitbashing Transformers?
then post them here anything you think might be helpful can go in here or request for a tip if you're stuck on a project!

OOH! OOH! PICK ME!

I Want to re-mold Animated Prowl's head, BUUUUT, I don't know what kind of stuff to use for such a thing.
What I wanna do is give him entenna like "Feathers" on each side of his head, and maybe a little gold mouth cover, but what would I use? Please Respond! :KREMZEEK:

News Credits: 4 · Tue Aug 02, 2011 5:09 pm

I have just started trying to do customs and have never really worked with plastics much before. I have been using a combination of brushes and airbrushing with Testors enamels. I have read through here and picked up some great tips from everyone, like using rubbing alcohol for paint removal and washing the parts. For sanding I have been using 1000 and 1200 grit wet/dry automotive grade sandpaper. I usually just sand by hand and in tight places with wrap a piece around the back side of my xacto blade. Skyfire77, what do you use to sand with and what grits do you use? Also do you dry or wet sand?

News Credits: 2 · Tue Aug 02, 2011 11:25 pm

Pretty much what you're using now. For coarser work I also have some Testors sanding films from when I did scale models, and a Dremmel for the really big jobs.

News Credits: 4 · Fri Aug 05, 2011 1:28 am

Skyfire77 wrote:Pretty much what you're using now. For coarser work I also have some Testors sanding films from when I did scale models, and a Dremmel for the really big jobs.

Thanks for the info. Yeah, I love my Dremel. I almost look for excuses just to get to use it for something.

Mon Aug 22, 2011 11:29 pm

I'm in need of a tip/help. I plan on making a brand new head for a project, but I don't know what I should use to make it. What color should I use to see detail while I'm creating the new head? Is Sculpey good?