Tramp wrote:That is definately not enough clearance. The trailer should have enough clearance to allow the front-most car to fit backwards on the front raised portion and clear the roof with room to spare. As it stands now, you barely have enough room for the hood to clear and there is barely any headroom on the lower portion of the deck. It would be better if the struts were lengthend by about a 1/2 to 3/4 of an inch. Basically, the top pf the back strut attached to the legs should run along the mid line of the length of the arm.
the first version had the same aspect... something that i never had a problem with and i dont want to compromise the robot more... the reason why it,s a bit more squeezed is the matrix chamber.... that,s compromising ... if i favor the trailer then it,s the robot mode that will suffer ... if i favor the robot mode then the trailer will suffer... that,s always the dilemma that we face ... this is a choice and also at this point anyway if i dont put more lenght to the trailer then it will become a 3 vehicule trailer instead of four.... comprimise.... but i,m happy with the results