Seibertron.com Energon Pub Forums

Well, got my Nemesis Prime today. What a nice surprise! Even went to my local Walmart and found the last 3 Terrorcons too. Not a bad haul for the day!
Now to prepare for TfCon in Toronto to spend the rest of my money...

Caelus wrote:

o.supreme wrote:

Caelus wrote:Too bad I can't cancel my preorder.

Why not? Where did you pre-order from? I did BBTS, and until they actually get the item in stock, you can cancel.

Tfsource; they have a no cancellation policy.

I decided to say screw it and bought a set anyway. I'll resell the preordered figures when they arrive and probably break even at worst.

EDIT: If any Knoxville peeps are still looking for any of the three when my preorder arrives, drop me a line - if you can pick them up from me in person and pay cash I'll cut you a good deal.

Add your pre-order items at TF Source to your "Stack" instead of using the blue "Pre-Order" button. You don't pay until the item is in stock, you can cancel anything in your stack that's not in stock yet without penalty, AND you can wait to ship any paid merchandise in your stack until you have $150 worth and get free shipping.

Wolfman Jake wrote:Add your pre-order items at TF Source to your "Stack" instead of using the blue "Pre-Order" button. You don't pay until the item is in stock, you can cancel anything in your stack that's not in stock yet without penalty, AND you can wait to ship any paid merchandise in your stack until you have $150 worth and get free shipping.

Yeah, I figured that out a while back, but what was done was done.

Caelus wrote:

Wolfman Jake wrote:Add your pre-order items at TF Source to your "Stack" instead of using the blue "Pre-Order" button. You don't pay until the item is in stock, you can cancel anything in your stack that's not in stock yet without penalty, AND you can wait to ship any paid merchandise in your stack until you have $150 worth and get free shipping.

Yeah, I figured that out a while back, but what was done was done.

Live and learn, I guess?

Why yes it is, ZeroWolf! It's Countdown and his Rocket Base -- it worked for appropriate scaling.

EDIT!
Also, I just found the wave2 Prime Masters at Target here in OR! I was hunting wave3 since I gave up, but they had plenty on the rack. No other classes for wave2/3, however.

Bounti76 wrote:Thanks to a tip and photo evidence from fellow Seibertronian Houstonian Prime, we can confirm that the smallest members of Wave 3 of Power of the Primes figures have been found at retail in the United States! Megatronus w/Bomb Burst, Quintus Prime with Bludgeon, and the only female Prime, Solus Prime w/ Octopunch, have been found at a Walmart in Stafford, Texas. This means that all figures from Wave 3 have now been found at U.S. retail! We now only await Wave 4's Novastar (aka Firestar) as the lone figure in any size class from Wave 4, and the regular retail releases from Power of the Primes will be complete! Please be sure to note your local sightings on the front page and in your local sightings forum!

Optimal Optimus was spotted at U.S. Retail? Must have missed that bit of news...

o.supreme wrote:

Bounti76 wrote:Thanks to a tip and photo evidence from fellow Seibertronian Houstonian Prime, we can confirm that the smallest members of Wave 3 of Power of the Primes figures have been found at retail in the United States! Megatronus w/Bomb Burst, Quintus Prime with Bludgeon, and the only female Prime, Solus Prime w/ Octopunch, have been found at a Walmart in Stafford, Texas. This means that all figures from Wave 3 have now been found at U.S. retail! We now only await Wave 4's Novastar (aka Firestar) as the lone figure in any size class from Wave 4, and the regular retail releases from Power of the Primes will be complete! Please be sure to note your local sightings on the front page and in your local sightings forum!

Optimal Optimus was spotted at U.S. Retail? Must have missed that bit of news...

Every time I spot Rodimus Prime on the shelf, I get excited, hoping I'll find Optimal Optimus right behind him, but it's just more Optimus Primes (i.e., wave 1) so far. FYI, Rodimus Prime is shipping with Optimal Optimus in Wave 3. Wave 2 was Rodimus Unicronus with Optimus Prime, I believe.

bodrock wrote:Why yes it is, ZeroWolf! It's Countdown and his Rocket Base -- it worked for appropriate scaling.

EDIT!
Also, I just found the wave2 Prime Masters at Target here in OR! I was hunting wave3 since I gave up, but they had plenty on the rack. No other classes for wave2/3, however.

IMG_4009.JPG

I never miss a micromaster actually if you added a cape to Abominus, it could have been a scene from the Transformers Zone anime

Wolfman Jake wrote:

o.supreme wrote:

Bounti76 wrote:Thanks to a tip and photo evidence from fellow Seibertronian Houstonian Prime, we can confirm that the smallest members of Wave 3 of Power of the Primes figures have been found at retail in the United States! Megatronus w/Bomb Burst, Quintus Prime with Bludgeon, and the only female Prime, Solus Prime w/ Octopunch, have been found at a Walmart in Stafford, Texas. This means that all figures from Wave 3 have now been found at U.S. retail! We now only await Wave 4's Novastar (aka Firestar) as the lone figure in any size class from Wave 4, and the regular retail releases from Power of the Primes will be complete! Please be sure to note your local sightings on the front page and in your local sightings forum!

Optimal Optimus was spotted at U.S. Retail? Must have missed that bit of news...

Every time I spot Rodimus Prime on the shelf, I get excited, hoping I'll find Optimal Optimus right behind him, but it's just more Optimus Primes (i.e., wave 1) so far. FYI, Rodimus Prime is shipping with Optimal Optimus in Wave 3. Wave 2 was Rodimus Unicronus with Optimus Prime, I believe.

I was aware of that, however, thank you for the reminder. I was just focused on the proclamation that ALL of wave 3 has now been spotted at US retail, I cant find the news story about OpOp's first appearance.

In other exciting personal news, I was shocked to find out how much cash my son has saved up (grandparents on both sides gave both my kids cash gifts for finishing the school year with good grades). He now has nearly enough *I assume* to get the Throne of the Primes SDCC toy if he wanted. I had a long discussion with him, explaining the cost, and how much he could save if he just wanted a standard OpOp. But he wants to go for the exclusive, so more power to him. I told him I will try my best, once they become available on HTS, but I cant make any promises because they go fast, and we never know exactly when they'll become available.

ZeroWolf wrote:I never miss a micromaster actually if you added a cape to Abominus, it could have been a scene from the Transformers Zone anime

you know...despite what Edna Mode would say, I'd pay a fair amount if some 3P company would make Zone inspired capes/weapon accessories for the CW/PotP combiners.

o.supreme wrote:

ZeroWolf wrote:I never miss a micromaster actually if you added a cape to Abominus, it could have been a scene from the Transformers Zone anime

you know...despite what Edna Mode would say, I'd pay a fair amount if some 3P company would make Zone inspired capes/weapon accessories for the CW/PotP combiners.

I may have to discuss this with my wife.

Caelus wrote:

o.supreme wrote:

ZeroWolf wrote:I never miss a micromaster actually if you added a cape to Abominus, it could have been a scene from the Transformers Zone anime

you know...despite what Edna Mode would say, I'd pay a fair amount if some 3P company would make Zone inspired capes/weapon accessories for the CW/PotP combiners.

I may have to discuss this with my wife.

I'd also love some Combiner Cape action!

Snarl, Sludge, Moonracer, and Blackwing are in stock on Amazon for $16.99 each right now. Finally get to finish my Dinobots and wave 2! And if you need him Rippersnapper is $15.95.

Emerje

o.supreme wrote:

ZeroWolf wrote:I never miss a micromaster actually if you added a cape to Abominus, it could have been a scene from the Transformers Zone anime

you know...despite what Edna Mode would say, I'd pay a fair amount if some 3P company would make Zone inspired capes/weapon accessories for the CW/PotP combiners.

I'm actually surprised someone hasn't done it already.

Ok, take 2, since my wifi crapped out. Pissed I gotta type this all again...

So having had the wave 2 deluxes and Outback for a bit, here are some thoughts, added with the newly aquired Cutthroat!

Snarl: fantastic mold, probably the best beast former I have so far from Potp, and Blot is the only one that can beat him. His alt mode is my favorite dino, so that helps. He's spiky and fun, plain and simple. Get him.

Sludge: not bad, but boring. I wish his dino head and neck could fold closer to his body, but that's my lone gripe. Just wish he was a bit more exciting, but he's Sludge, not much more to him.

Rippersnapper is great, the Terrorcons are turning out great! Love all the gun storage on him too, it all blends nicely!

Cutthroat is pretty cool too. Neither he nor Swoop has a clear advantage or is clearly better than the other, but he is fun. I'm glad his ankles are solid though, makes him a much more stable limb.

Blackwing kinda disappointed me because of the wings. Air Raid nailed the Wings, and Blackwing basically undid was made Air Raid good. i really wish the wings could fold up. Super glad Dreadwing made it's way to PotP too.

Moonracer is alright. I do not like leg mode, and the car mode won't roll with the tabs on her back. Arm mode is her best mode, and her bot mode isn't very well balanced. I do like having her canopy down as a trenchcoat as well, she's Crosshairs sister!

Outback is a great mold with good paint and a killer head, he's a must get.

Thanks to a heads up from Seibertronian westjames/notirish, we have news that Amazon Japan has added listings for Takara Tomy's Power of the Primes Wreck Gar and Nemesis Prime, and the listings feature new images. While both are set to be Hasbro exclusives, to Walgreens and Amazon, respectively, both are set to be mainline figures for Takara's line, with numerous pre-orders beginning to go up. These new images give us yet another great look at the pure evil of Nemesis Pax and Nemesis Prime, as well as some new shots of Wreck Gar, including a shot with him as an arm to the Inferno combiner with the Hasbro wave 3 Terrorcons as the other limbs.

A reminder that these figures are identical to their Hasbro counterparts.

Check out the images below, and let us know what you think in the comments section below!

I might have to paint up Wreck Gars Prime Armor, or at least the spikes so it looks more complete.

That Wreck Gar looks way better than he has any right to be, being a simple repaint of Unite Warriors Groove with new head. The color layout isn't particularly faithful to the original toy OR his G1 cartoon appearance. He's missing a lot of the classic "Wreck Gar" elements in his silhouette like the "perky" chest nubs/gun barrels and the asymmetric use of alt-mode kibble. About the only thing is that the chosen color pallet is pretty much correct, even if the colors are not all in exactly the right places. Somehow, though, it still works beautifully. He's still not going to replace my Transformers United Wreck Gar on my display shelf, but he will be a great limb for one of my combiners. Now, I just have to figure out which gestalt he will help complete.

Emerje wrote:Snarl, Sludge, Moonracer, and Blackwing are in stock on Amazon for $16.99 each right now. Finally get to finish my Dinobots and wave 2! And if you need him Rippersnapper is $15.95.

Thanks for the heads up! I don't use Amazon often, but I still need all those figures except Blackwing.

Glad you got yours Bounti! Haven't opened mine yet but was very happy to have him arrive this early. I'd assume more people will be getting theirs this week before Prime Day
Things are so organized between Amazon and Hasbro...

Did any of you want to wait until SDCC to finally see what Repugnus and Punch / Counterpunch were goint to look like? Well for those who couldn't wait, we have some images for you. And not just some blurry pics or part of the leg, but full on official images of the toys (and not renders either). These were uplaoded to the internet by Squigsquasher and also Tweeted by General Tekno.

As presumed, Repugnus shares the Twinferno and Grotusque mold with some remolding of his own. He does end up similar to several digibashes of the past year but with a much more prominant head, as we would hope.

Punch / Counterpunch is a true enigma since not only is it a new mold but while he represents the Power of the Primes portion of the Prime Wars, he does not appear to be able to combine. He does come with a special edition clear Prime Master.

These should be amazon exclusives and we will be sure to tell you when they will be available for order.

Enjoy the images!

I'm both impressed and letdown at the same time. Impressed that they both look really good, mold-wise (save for Repugnus's unsightly abdomen). Letdown because Punch isn't a combiner and Repugnus looks like his robot head has no paint.

And couldn't the photographer be bothered lift up Punch's helmet to show his eyes for both of his robot modes?

Sabrblade wrote:Letdown because Punch isn't a combiner

Why does that matter ? I am glad because I think a lot would have been comrpomised if he was (see previous Punch combiner).