Tracks! DONE.
62 posts
• Page 1 of 3 • 1, 2, 3
Tracks! DONE.
***Update 8/18***at end of thread
***Update 8/16***at end of thread
***Update 6/30***at end of thread
***Update 6/22***at end of thread
***Update 6/11***at end of thread
welp, here it is the first of my classics built with a model kit as the alt mode. I got myself a 1/32 '78 corvette. classics mirage will be the skeleton. wings will be modified plastic forks. not sure about the head yet. this will be fully transformable...i hope. I also decided to make two at the same time and see if I can recoup some of my money on this through ebay. anyway, I'll update as it goes. sorry about the quality of the picks. had to use my phone for these.
cheers.
***Update 8/16***at end of thread
***Update 6/30***at end of thread
***Update 6/22***at end of thread
***Update 6/11***at end of thread
welp, here it is the first of my classics built with a model kit as the alt mode. I got myself a 1/32 '78 corvette. classics mirage will be the skeleton. wings will be modified plastic forks. not sure about the head yet. this will be fully transformable...i hope. I also decided to make two at the same time and see if I can recoup some of my money on this through ebay. anyway, I'll update as it goes. sorry about the quality of the picks. had to use my phone for these.
cheers.
- Attachments
-
- tracks1.jpg (161.22 KiB) Viewed 3434 times
-
- tracks2.jpg (158.36 KiB) Viewed 3435 times
-
- tracks3.jpg (151.98 KiB) Viewed 3435 times
Last edited by Wheeljack-S70 on Sat Aug 18, 2007 3:49 pm, edited 5 times in total.
- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
Oooooooo, I like. I see potential. Tracks was always one of my favourites figures as a kid, so it'll be nice to see an updated version (excluding Alternators).
You do this right, I may just have to bid on your second one. What kind of price are we looking at?
You do this right, I may just have to bid on your second one. What kind of price are we looking at?
- Mulla
- Vehicon
- Posts: 395
- News Credits: 12
- Joined: Mon May 16, 2005 2:55 am
Mulla™ wrote:What kind of price are we looking at?
I don't want to jump the gun on this. I may end up royally effing one of these up. I’ll keep this thread updated as it goes.
thanks

- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
That has alot of potential. I still cant figure out though how you get the car parts from the model kit to stick into the same areas that the car parts from the original figure came from in order to make it transform into a car again. How do you do that?
Check out my G1 re-paint of Alternators Silverstreak btw!
Check out my G1 re-paint of Alternators Silverstreak btw!
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
Sonray wrote:That has alot of potential. I still cant figure out though how you get the car parts from the model kit to stick into the same areas that the car parts from the original figure came from in order to make it transform into a car again. How do you do that?
Check out my G1 re-paint of Alternators Silverstreak btw!
The respray looks great. as far as getting tracks to transform. well, that's a good question.



- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
Wheel_Jack wrote:Sonray wrote:The respray looks great. as far as getting tracks to transform. well, that's a good question.and I don't have a firm answer yet. but I'm close. and when I figure it out, I'll be sure to let you guys know.
Alright, thanks! I cant wait as i plan on doing one of these with a classics bumblebee soon myself. Where did you buy the small scale model kit from?
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
Sonray wrote:Where did you buy the small scale model kit from?
ebay. I searched under something like "model kit corvette 1:32"
the 1:32 scale seems to fit with the classics OK.
the pins are a pain. if you can see both ends of it you can pop them out with another pin and a firm tap with a hammer. the ones that are visible on one side only, I don't know. I'm also no pro with this stuff. alot of it is trial and error. I've errored a lot.
me sleep now.
- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
Wheel_Jack wrote:Sonray wrote:Where did you buy the small scale model kit from?
ebay. I searched under something like "model kit corvette 1:32"
the 1:32 scale seems to fit with the classics OK.
the pins are a pain. if you can see both ends of it you can pop them out with another pin and a firm tap with a hammer. the ones that are visible on one side only, I don't know. I'm also no pro with this stuff. alot of it is trial and error. I've errored a lot.
me sleep now.
Well youve told me alot more than some. I tried searching on ebay for the kit i need but found only one and i couldnt afford it. Dammit.
I figured those pins would pop out that way, have you ever had any luck with changing the wheels?
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
Sonray wrote:Well youve told me alot more than some. I tried searching on ebay for the kit i need but found only one and i couldnt afford it. Dammit.
I figured those pins would pop out that way, have you ever had any luck with changing the wheels?
check these out
http://cgi.ebay.com/Revell-Snaptite-RED ... dZViewItem
http://cgi.ebay.com/Revell-1-32-Snaptit ... dZViewItem
removing the pins on the tires was covered in an earlier thread
http://seibertron.com/forums/viewtopic.php?t=5227&sid=
hope that helps


- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
ok here's a quick photo update on the project.
the legs are almost complete. they fold under the hood and clip together perfectly – this is all mirage. but the two halves of the hood match up really well. the hole in the hood will have a raised engine cover that will convert into tracks' gun. his feet will be “folded classic divebomb's arms”. these will flip open in alt mode so that he can blow out others' tires in a high speed chase or during an air strike. the white shape over his right leg is a roughed out cover that will swivel to the side to fold the legs in. in robot mode they'll cover the void left in his legs when they're folding out. his wings are ripped off of rodimus. No worries, I'll be using mirages wings on rodims when I convert him to sideswipe and redalert. I threw rodimus in some of the shots for scale. tracks is gonna be an inch or so taller. I came up with two accessories that will accompany tracks and these will surely delight any hardcore G1 fan. Personally I can’t wait to finish this so that I can get to those. my only dilemma right now and it's a major one, is that I don't want to sculpt a new head and mirage's head is too distinct to try to repaint. any suggestions?
Thanks all.
the legs are almost complete. they fold under the hood and clip together perfectly – this is all mirage. but the two halves of the hood match up really well. the hole in the hood will have a raised engine cover that will convert into tracks' gun. his feet will be “folded classic divebomb's arms”. these will flip open in alt mode so that he can blow out others' tires in a high speed chase or during an air strike. the white shape over his right leg is a roughed out cover that will swivel to the side to fold the legs in. in robot mode they'll cover the void left in his legs when they're folding out. his wings are ripped off of rodimus. No worries, I'll be using mirages wings on rodims when I convert him to sideswipe and redalert. I threw rodimus in some of the shots for scale. tracks is gonna be an inch or so taller. I came up with two accessories that will accompany tracks and these will surely delight any hardcore G1 fan. Personally I can’t wait to finish this so that I can get to those. my only dilemma right now and it's a major one, is that I don't want to sculpt a new head and mirage's head is too distinct to try to repaint. any suggestions?
Thanks all.
- Attachments
-
- tracks0797.jpg (181.25 KiB) Viewed 3225 times
-
- tracks0796.jpg (144.55 KiB) Viewed 3225 times
-
- tracks0795.jpg (218.98 KiB) Viewed 3224 times

- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
Wheel_Jack wrote:Sonray wrote:Well youve told me alot more than some. I tried searching on ebay for the kit i need but found only one and i couldnt afford it. Dammit.
I figured those pins would pop out that way, have you ever had any luck with changing the wheels?
check these out
http://cgi.ebay.com/Revell-Snaptite-RED ... dZViewItem
http://cgi.ebay.com/Revell-1-32-Snaptit ... dZViewItem
removing the pins on the tires was covered in an earlier thread
http://seibertron.com/forums/viewtopic.php?t=5227&sid=
hope that helps
Yeah those are what i need, but on the ebay.uk site. And not of a corvette

That pin method scares me....did you have any joy with it?
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
Damn. I wish I could Kitbash sooooo bad. Then I could make my own figures for the Classics line & be happy. Truly happy. *sigh* Oh well. The next best thing I can do is offer you Kitbashers money............

Latest Acquisition(s):
BW Tigatron
BW II Flash Lio Convoy
BW Metals Rampage
BW Neo Big Convoy
BW Neo Magmatron
-
Dclone Soundwave - Godmaster
- Posts: 1916
- Joined: Sun Jan 16, 2005 10:45 pm
- Location: CA
Decepticlone Soundwave wrote:Damn. I wish I could Kitbash sooooo bad. Then I could make my own figures for the Classics line & be happy. Truly happy. *sigh* Oh well. The next best thing I can do is offer you Kitbashers money............
I am willing to assist on that one.

Wait until i finish my current kitbash though then we can talk. What do you want done so desperately?
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
Wheel_Jack wrote:ok here's a quick photo update on the project.
the legs are almost complete. they fold under the hood and clip together perfectly – this is all mirage. but the two halves of the hood match up really well. the hole in the hood will have a raised engine cover that will convert into tracks' gun. his feet will be “folded classic divebomb's arms”. these will flip open in alt mode so that he can blow out others' tires in a high speed chase or during an air strike. the white shape over his right leg is a roughed out cover that will swivel to the side to fold the legs in. in robot mode they'll cover the void left in his legs when they're folding out. his wings are ripped off of rodimus. No worries, I'll be using mirages wings on rodims when I convert him to sideswipe and redalert. I threw rodimus in some of the shots for scale. tracks is gonna be an inch or so taller. I came up with two accessories that will accompany tracks and these will surely delight any hardcore G1 fan. Personally I can’t wait to finish this so that I can get to those. my only dilemma right now and it's a major one, is that I don't want to sculpt a new head and mirage's head is too distinct to try to repaint. any suggestions?
Thanks all.
I could probably make you a new head.
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
quick update.
he now has feet that fold in and out.
his torso area is now connected to his waist and legs. and might I add fully transformable
his hatchback sports removable rocket launchers with rockets(not pictured)
he also has side exhaust pipes that clip to his legs in alt mode.
feet and rockets came from cheapo walmart fake transformer toys.
he now has feet that fold in and out.
his torso area is now connected to his waist and legs. and might I add fully transformable
his hatchback sports removable rocket launchers with rockets(not pictured)
he also has side exhaust pipes that clip to his legs in alt mode.
feet and rockets came from cheapo walmart fake transformer toys.
- Attachments
-
- Photo_0844.jpg (101.53 KiB) Viewed 2230 times
-
- tracks0841.jpg (108.53 KiB) Viewed 2232 times

- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
Wheel_Jack wrote:quick update.
he now has feet that fold in and out.
his torso area is now connected to his waist and legs. and might I add fully transformable
his hatchback sports removable rocket launchers with rockets(not pictured)
he also has side exhaust pipes that clip to his legs in alt mode.
feet and rockets came from cheapo walmart fake transformer toys.
Kick ass! Mine is less complex, just a basic re-fit as i dont know how to make strong enough joints to make my own new ones for new weapons and stuff like you have.
What do you use to make such strong joints?
- Sonray
- City Commander
- Posts: 3521
- Joined: Tue May 08, 2007 5:42 pm
- Motto: "Don't do drugs, beer's cheaper anyway!"
Sonray wrote:Wheel_Jack wrote:quick update.
he now has feet that fold in and out.
his torso area is now connected to his waist and legs. and might I add fully transformable
his hatchback sports removable rocket launchers with rockets(not pictured)
he also has side exhaust pipes that clip to his legs in alt mode.
feet and rockets came from cheapo walmart fake transformer toys.
Kick ass! Mine is less complex, just a basic re-fit as i dont know how to make strong enough joints to make my own new ones for new weapons and stuff like you have.
What do you use to make such strong joints?
Truly awsam!
And yea I'de like to know wat you use to make joints.

Jeep! wrote:Why do I imagine Dead Metal sounding exactly like Arnie?
Intah-wib-buls?
Blurrz wrote:10/10
Leave it to Dead Metal to have the word 'Pronz' in his signature.
-
Dead Metal - God Of Transformers
- Posts: 13933
- News Credits: 767
- Joined: Tue May 01, 2007 6:18 am
Sonray wrote:Wheel_Jack wrote:quick update.
he now has feet that fold in and out.
his torso area is now connected to his waist and legs. and might I add fully transformable
his hatchback sports removable rocket launchers with rockets(not pictured)
he also has side exhaust pipes that clip to his legs in alt mode.
feet and rockets came from cheapo walmart fake transformer toys.
Kick ass! Mine is less complex, just a basic re-fit as i dont know how to make strong enough joints to make my own new ones for new weapons and stuff like you have.
What do you use to make such strong joints?
other transformers. using a lot of the the little classic three pack guys. I'm no expert in these matters.

- Wheeljack-S70
- Vehicon
- Posts: 342
- News Credits: 1
- Joined: Sat Apr 21, 2007 9:43 am
- Motto: "I do it my way: with style."
- Weapon: Electrostatic Discharger Rifle
loving what I'm seeing on this. Good work.
- AutobotJazz
- Headmaster Jr
- Posts: 560
- News Credits: 104
- Joined: Sun Jun 01, 2003 6:06 pm
- Location: Melbourne, Florida
- Follow AutobotJazz on Twitter
- Watch AutobotJazz on YouTube
62 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Registered users: Bing [Bot], Bumblevivisector, Glyph, Google [Bot], Google Adsense [Bot], Google Feedfetcher, Lunatyk, Mewtwo Ex, MSN [Bot], Silver Wind, sprockitz