Seibertron.com Energon Pub Forums

[Counterpunch]

http://www.bigbadtoystore.com/bbts/prod ... ode=retail

It's $200.

Before you go into full blown complaining mode, allow me to direct your attention to the following note on the pre-order:

PLEASE NOTE: The pricing of this item is subject to change (most likely lower), once the retail pricing in Japan is known, we will calculate and adjust our pricing. This item has not yet been officially announced; we will add more information once it is known.

The high price indicates one thing...it's going to be a large piece, most likely with the trailer.

[REMINATOR]

Jumping Jupiter, that is madly expensive!!!

Ok, now that is out the way, hopefully the real price isn't that steep. Right now, I can't comment much until we see some pics of the prototype.

[Blurrz]

Balls

[El Duque]

Pre-ordered! I know I was complaining in the other thread about my lack of enthusiasm toward an MP Rodimus, but it's not like I'm going to miss out on the next MP mold!

[Flux Convoy]

I didn't even bother reading anything past the link until I ordered. Done, I'm there. Pricing will most likely be that ballpark or a bit cheaper.

[Son of Primus]

As much as I would love to pre-order this, I think I'm going to have to wait and see what it looks like before I shell out that kind of cash. Plus with my "rule" about not having two of the same characters of the shelf, it be a shame to make a purchase for that much, just to decide I would like to display the Protector Upgrade Armor as my Rodimus Prime. Time will tell.

[LOST Cybertronian]

Eh, as excited as I am for this I am going to have to wait for Hasbro this time and get it 1/2 to 1/3 cheaper.

[sabrigami]

Eh, as excited as I am for this I am going to have to wait for Hasbro this time and get it 1/2 to 1/3 cheaper.

Yeah, no kidding. I can't shell out $200 bucks on one fig, even if it is Rodimus. Hopefully Hasbro will release him around next summer.

[--B--]

Eh, as excited as I am for this I am going to have to wait for Hasbro this time and get it 1/2 to 1/3 cheaper.

Yeah, no kidding. I can't shell out $200 bucks on one fig, even if it is Rodimus. Hopefully Hasbro will release him around next summer.

Move over, I'm jumping in that boat with you! The only MP's I have are the ones that have come stateside.

[DaiShanPrime]

Eh, as excited as I am for this I am going to have to wait for Hasbro this time and get it 1/2 to 1/3 cheaper.

Yeah, no kidding. I can't shell out $200 bucks on one fig, even if it is Rodimus. Hopefully Hasbro will release him around next summer.

Move over, I'm jumping in that boat with you! The only MP's I have are the ones that have come stateside.

In another thread this was the MP figure I wished for most, however I'll have to be patient and hope it come to u.s. retail soon.

[Kibble]

I put in a pre-order as a place holder, but I'm thinking I'll be canceling. Either to order from RobotKingdom and save $30 or $40, or just wait for the Hasbro version. The Takara Grimlock is still readily available so it seems it's nothing ya gotta jump on quick. Waiting's the only tough part...especially if it ends up looking super awesome.

[LiKwid]

I've never owned a high end Mp figure before..I don't really count MP skywarp since he was only $30 at wal mart..Rodimus has always been my favorite character and I think this would look great in my collection..Now for that Shattered glass Rodimus ...........

[Dead Metal]

Site sponsor BigBadToyStore.com has posted a pre-order page for the newest addition to the Masterpiece line: Rodimus Prime!
The current price is listed as USD 200, this is however just a current price estimate and will change furthermore it reveals that the figure is estimated to arrive in the 4. Quarter of 2010.

Just click here to view the pre-order page.

Stay tuned to seibertron.com for all your transformers related news!

[Mykltron]

http://www.bigbadtoystore.com/bbts/product.aspx?product=TAK11138&mode=retail

It's $200.

Before you go into full blown complaining mode, allow me to direct your attention to the following note on the pre-order:

PLEASE NOTE: The pricing of this item is subject to change (most likely lower), once the retail pricing in Japan is known, we will calculate and adjust our pricing. This item has not yet been officially announced; we will add more information once it is known.

The high price indicates one thing...it's going to be a large piece, most likely with the trailer.

Oh yeah, cos Grimlock came with a hefty price tag and he is huge.

[SJ21]

I don't like the way the pricing on MP's is going. I preordered all 4 of my MP's but I am not sure about this one. I will wait until we see some pictures of an actual toy, or just wait for a Hasbro version.

[Stockade]

More pics would = more convincing thoughts to buy it.

[Counterpunch]

http://www.bigbadtoystore.com/bbts/product.aspx?product=TAK11138&mode=retail

It's $200.

Before you go into full blown complaining mode, allow me to direct your attention to the following note on the pre-order:

PLEASE NOTE: The pricing of this item is subject to change (most likely lower), once the retail pricing in Japan is known, we will calculate and adjust our pricing. This item has not yet been officially announced; we will add more information once it is known.

The high price indicates one thing...it's going to be a large piece, most likely with the trailer.

Oh yeah, cos Grimlock came with a hefty price tag and he is huge.

If that's an attempt at sarcasim, you can go back home and practice a little more before stepping up to swing with me. I'm not mad at you or anything, I just like to give helpful advice. I'm a giver, a real people person.

First off, the price for Rodimus is really undetermined. BBTS is guessing at it due to the size.

Second, Grimlock, even considering the guess at price of Rodimus, is 25% cheaper.

Third, Grimlock was developed and produced during the height of the oil gouging on the global market. Everything had its cost increased if it containg plastic at that time.

[SJ21]

I don't know CP, I thought the Grimlock comment was pretty good.

The oil gouging thing is pretty accurate. Grimlock did come out when petro products were at peak price, which affected those products at that time. However I don't think we are going to see the prices go back down any. While Rodimus might not end up being $200, you can bet that it won't be cheaper than $150. If it is larger/more complex than Grimlock I think we can expect it to be north of $175.

[Counterpunch]

I don't know CP, I thought the Grimlock comment was pretty good.

The oil gouging thing is pretty accurate. Grimlock did come out when petro products were at peak price, which affected those products at that time. However I don't think we are going to see the prices go back down any. While Rodimus might not end up being $200, you can bet that it won't be cheaper than $150. If it is larger/more complex than Grimlock I think we can expect it to be north of $175.

I expect Rodimus to be around the $175-200 mark. I expect that he'll be a large figure due to the trailer etc.

Mykltron's point was that Grimlock was both expensive and on the small side for the price. He was snarkily pointing out in a contrary way that price isn't an indicator of size. Grimlock was $150, Rodimus is a possible $200.

All I was saying is that there were definitve reasons for Grimlock's cost and that the inclusion of the trailer is a hint that the figure will be of a larger size at least in terms of mass, and that is tied in to price point.

[SJ21]

I completely agree with you. With Rodimus having a trailer he will surely be more expensive. I just hope that he is a larger figure, more on scale with Prime and Megatron not Starscream and Grimlock.

And I was just pointing out that I enjoyed his sarcasm. Maybe not quite your sarcasm level, but funny enough to warrant a good laugh.

[joevill]

Wow... it is expensive but wasn't MP Prime the same price too? I'm sure it will be worth it!

[Prime Evil]

Hmmm, a new MP figure of Rodimus. I think I'm getting burned out because it looks like an amazing piece and I DON'T have an urge to get it. I don't have amy MP figures up so that may have something to do with it. I'm already tight for space and I can't see me finding a spot just for MP figures right now...Grimmy is different because he is gonna go on my classics shelf.

Guess I should still put in a pre-order just incase and can always cancel later.

[rpetras]

BAH!!!

Fie, curses and a pox on this!

I wanted to dismantle my MP/Alt shelf, but now I want to keep them around till this comes out.

I suspect he will be on the large side with that trailer, not quite as big as MP04, but still pretty big.

[kirbenvost]

Pre-ordered, but yeah, I hope it ends up cheaper than that.

[Tigertrack]

I don't know CP, I thought the Grimlock comment was pretty good.

The oil gouging thing is pretty accurate. Grimlock did come out when petro products were at peak price, which affected those products at that time. However I don't think we are going to see the prices go back down any. While Rodimus might not end up being $200, you can bet that it won't be cheaper than $150. If it is larger/more complex than Grimlock I think we can expect it to be north of $175.

I expect Rodimus to be around the $175-200 mark. I expect that he'll be a large figure due to the trailer etc.

Mykltron's point was that Grimlock was both expensive and on the small side for the price. He was snarkily pointing out in a contrary way that price isn't an indicator of size. Grimlock was $150, Rodimus is a possible $200.

All I was saying is that there were definitve reasons for Grimlock's cost and that the inclusion of the trailer is a hint that the figure will be of a larger size at least in terms of mass, and that is tied in to price point.

Think I paid $250 for Sleep Convoy, and MP-04 (Prime with trailer), was around $225, I think.

To me the $200 price range seems about right.