The Energon Pub

News Credits: 1642 · by **D-Maximal_Primal** » Wed Oct 21, 2020 6:37 pm

EvasionModeBumblebee wrote:
D-Maximal_Primal wrote:
EvasionModeBumblebee wrote:Y'know, if it weren't for the flap on the back of Primal's head there, he could probably wear the Mando helmet that came with that version of the armorer!

That's actually Lio Prime, no Optimus or Primal here!

Ya know, you might be right, now I need to see if the helmet can actually fit on anyone here

Dang it, I was kinda close at least!

Wait, that’s the Cybertron Leobreaker mold, right? So can Cybertron Optimus use Lio Prime as an arm?

He can! i have 3 of the 5 uses of that mold, only missing the actual Lio Convoy colored one and Nemesis breaker

News Credits: 12 · by **Evil Eye** » Thu Oct 29, 2020 8:39 am

So I managed the reinforce the Shapeways adapters with a bit of superglue and now my FrankenSuperion is ultra-sturdy. Mutliple combinations don't seem to have affected the security either. So with that being said, some fun.

Superion salutes!

Superion goes for a walk!

Superion poses!

Superion does the Chad Stride! (I apologise for this one)

News Credits: 1642 · by **D-Maximal_Primal** » Fri Oct 30, 2020 1:23 pm

We've got a new team assembling, and we are close to forming a new combiner

News Credits: 42 · by **TF-fan kev777** » Sat Oct 31, 2020 5:43 pm

Happy Halloween!!!

News Credits: 1642 · by **D-Maximal_Primal** » Sat Oct 31, 2020 8:37 pm

Hello there...

GENERAL KENOBI

Website · by **Fires_Of_Inferno** » Sat Oct 31, 2020 10:08 pm

Spiders are scary, right? Happy Candyween!

"... What? YOU weren't eating it!"

Website · by **Fires_Of_Inferno** » Sun Nov 01, 2020 4:32 pm

Website · by **Fires_Of_Inferno** » Sun Nov 01, 2020 5:07 pm

And just because, here's another!

News Credits: 10 · by **sol magnus** » Mon Nov 02, 2020 12:02 am

So I swapped heads with Prowl as I said I would.

The attachment IMG_7092.jpg is no longer available

It was more difficult than I thought due to the tightness of the head on the Earthrise figure as well as the fact that the Earthrise ball joint is somewhat larger than that of the Siege ball joint, but they still fit. No Dremel needed.

Overall, I think it is closer to the mini-Masterpiece look, despite some of Hasbro's deco choices.

The attachment IMG_7094.jpg is no longer available

MyFigureCollection.net collection · by **Emerje** » Mon Nov 02, 2020 1:51 am

sol magnus wrote:So I swapped heads with Prowl as I said I would.
IMG_7092.jpg

It was more difficult than I thought due to the tightness of the head on the Earthrise figure as well as the fact that the Earthrise ball joint is somewhat larger than that of the Siege ball joint, but they still fit. No Dremel needed.
IMG_7093.jpg

Overall, I think it is closer to the mini-Masterpiece look, despite some of Hasbro's deco choices.

IMG_7094.jpg

Reminds me of when I replaced Classics Cliffjumper's head with original WFC Cliff's head. Prowl looks good! ;)^

Emerje

News Credits: 2 · by **Nemesis Destron** » Tue Nov 03, 2020 3:00 am

The greatest modern representation of G1 IMHO...that's awesome FOI! :APPLAUSE:

News Credits: 10 · by **sol magnus** » Tue Nov 03, 2020 10:57 am

I'm really happy with how it turned out.

Website · by **Fires_Of_Inferno** » Tue Nov 03, 2020 1:18 pm

Yes.

by **WeatherManNX01** » Thu Nov 05, 2020 3:01 pm

Definitely like the Prowl head swap. It won't be a high priority for me, but enough to have me keeping an eye on eBay for an inexpensive Siege Prowl.

News Credits: 17 · by **AcademyofDrX** » Thu Nov 05, 2020 3:08 pm

Prowl head swap complete. Just have to get some nail polish out so that Siege Prowl isn't a bobblehead. I'm amazed that the Siege and ER molds share so much engineering but are physically very different. The ball joint sizes have much more variance than I was expecting.

by **Starseeker** » Thu Nov 05, 2020 3:17 pm

"Prime? Can you hear me?"
"Yes,master. Where is Elita? Is she safe? Is she alright?"
"It seems that in your anger, you killed her."
"I...I couldn't have! Her spark was alive, I felt it! NOOOOOOOOOOO!"

by **Onibaku_Rave** » Thu Nov 05, 2020 6:52 pm

Robots in disguise amirite?

by **Starseeker** » Sun Nov 08, 2020 4:43 pm

All beast lineup!

News Credits: 3 · by **Lunatic Prime** » Sun Nov 08, 2020 4:52 pm

Starseeker wrote:All beast lineup!

Nice pack there ;)^

But where's Weirdwolf?

by **Onibaku_Rave** » Tue Nov 10, 2020 3:10 am

by **Onibaku_Rave** » Fri Nov 13, 2020 7:50 pm

Website · by **Fires_Of_Inferno** » Sat Nov 14, 2020 12:20 am

So I ordered this and it arrived today. I'll be honest, I wasn't expecting it to be as high quality as it is. I mean, I was at least expecting to get my monies worth for it, but this has honestly exceeded my expectations!

First off the vehicle mode is smooth, sleek, and the rubber tires means she rolls smoothly in vehicle mode. The dashboard is nicely detailed, and it holds together solidly!

Then robot mode happens! Ok let me explain. The description said that she came with "replacement chest armor". With that in mind I thought I would be able to cover up the robo cleavage (Robo Cleavage is my Synthwave band name now). Unfortunately it turns out the "replacement chest armor" is actually "squishy boobs" Yep. Oh well, doesn't matter, I'm never attaching them to her anyway.

With the elephant in the room addressed: Nicee is actually pretty awesome. Her articulation is excellent, she balances in any pose well, and if she doesn't then there is a port for a stand hidden in her back kibble!

Nicee's shoulder pylons can detach and be wielded as a bow (with accompanying arrow) or can go on her hips to give her a skirted look. They're also on balljoints so they can be posed in any way wherever you have them attached.

Her other accessories include a gun, a long and very sharp sword, the aforementioned arrow, as well as several extra hands, and an alternate face that makes her look like a cat for some reason (probably never going to use it) Also includes her squishy parts. A portion of her car part comes off and can be used as a shield as well. All in all, I really like this figure and I very much think she was worth purchasing!

And for people who are whining and complaining about the over-sexualized nature of the figure, yeah I can see that, but I still bought it. Looking at the other things that BigFirebirdToys has in the planning stages and also what they're already releasing I can safely say that yeah I'm gonna get their Windblade when they make her.

Oh look, I found something to do with them!

"Soundwave superior.... MY EYES ARE UP HERE!"

News Credits: 10 · by **sol magnus** » Sat Nov 14, 2020 9:42 am

Onibaku_Rave wrote:
AB4E81A3-FCA8-4099-BFEA-BDD23B4F595D.jpeg
6954E5EA-AB5E-44FA-A983-8953DE415716.jpeg
FADD1F2F-7548-4AF3-96CD-A52F256A7C30.jpeg
B4F989D3-4C4B-4CF3-AC91-A9746ABFAF64.jpeg
250F3C74-2D3A-4212-8167-EF6669D7A270.jpeg
BDD8DF2C-58EF-46F5-AD98-B2F7EE15775E.jpeg
F2F0AA54-7D17-47C5-9A33-9AEC6FEACCF9.jpeg
F6013CB4-814D-4CB9-ABAC-EA8162F03E74.jpeg
B66664BB-D791-433C-A612-B4ECCB603128.jpeg
8A5A9E68-2A33-4FD6-A22A-644893FC1DAE.jpeg

I wish they didn't make the Laser Rifle in the accessory pack MASTERPIECE sized. It looks ridiculous. But, you made it work pretty well, photographically speaking. I also wish the Siege blaster would fit in the Earthrise Prime's hand, but alas, his 'wrists' are too fat for that to work. Still, great photos once again!