Seibertron.com Energon Pub Forums

News Credits: 1350 · by **ZeroWolf** » Mon Feb 26, 2018 2:22 pm

Cobotron wrote:
ZeroWolf wrote:Lol I knew I should of explained as for the star saber it's probably something of a pipe dream, or two blackwings Hmm ...

Well, I think you would need a 5 ml post long enough to attach any other jet by the combiner foot port to Blackwing'd foot port. I'll have to think if I have anything that could work. I feel like one of my little Diaclone reboot guys came with some coupler rods in 3 and 5 ml sizes. I will hunt. I'm curious to see this done.

Good luck

(although I now feel guilty sending you on this impossible quest :lol:

)

News Credits: 131 · by **no-one** » Mon Feb 26, 2018 2:45 pm

Ah, ball-jointed wings, that'll be fun to tinker with. I love expressive wings. I like to do the angry wasp look.

I'm loving Ripperzipper's cool theme hoodie ;)^

News Credits: 41 · by **Cobotron** » Mon Feb 26, 2018 3:33 pm

ZeroWolf wrote:Good luck (although I now feel guilty sending you on this impossible quest )

There is hope Z-Dubs! You'll just have to let me get through my daily responsibilities before the big pay-off. Dang real life responsibilities always getting in the way of fun. [-(

carytheone wrote: Ripperzipper's cool theme hoodie

Ripperzipper!

News Credits: 1641 · by **D-Maximal_Primal** » Mon Feb 26, 2018 5:18 pm

Cobotron wrote:I guess so?

Aaaaaaaaand we have found Predaking a weapon!!

News Credits: 41 · by **Cobotron** » Mon Feb 26, 2018 7:30 pm

BEHOLD THE POWER OF DARK SABER!!!!!!!

I used a 5 ml coupler from this old Robolinks set (also known as Takara Block Man)

The little white thingy. ;)^

News Credits: 15 · by **galvatron00** » Mon Feb 26, 2018 8:43 pm

WOO HOO!!!!

News Credits: 3 · by **bodrock** » Mon Feb 26, 2018 9:52 pm

Cobotron wrote:Oh HAI, Cram!

The connection to form Wingcross isn't that bad. It's a big 5mil peg, and it holds pretty well. I put him on that flight stand and he held together.

LMAO

News Credits: 1350 · by **ZeroWolf** » Tue Feb 27, 2018 3:51 am

Cobotron wrote:BEHOLD THE POWER OF DARK SABER!!!!!!!

I used a 5 ml coupler from this old Robolinks set (also known as Takara Block Man)

The little white thingy.

you sir, have out done yourself :APPLAUSE:

That is a thing of beauty

News Credits: 15 · by **galvatron00** » Tue Feb 27, 2018 7:51 am

Yeah, I'm gonna need that Dark Saber setup for Liokaiser. To combat the Star Saber figure I don't have. Gonna need to use some floor polish on the arm holding it though :lol:

News Credits: 15 · by **galvatron00** » Tue Feb 27, 2018 8:12 am

itscramtastic wrote:Yeah, I'm gonna need that Dark Saber setup for Liokaiser. To combat the Star Saber figure I don't have. Gonna need to use some floor polish on the arm holding it though

WHAT AM I THINKING?! I'LL GIVE IT TO ENERGON GALVATRON!!! Move over crappy small Energon Saber!! :lol:

News Credits: 41 · by **Cobotron** » Tue Feb 27, 2018 8:28 am

ZeroWolf wrote: you sir, have out done yourself

That is a thing of beauty

Oh goorsh. It was nothin'. Really.

itscramtastic wrote:
itscramtastic wrote:Yeah, I'm gonna need that Dark Saber setup for Liokaiser. To combat the Star Saber figure I don't have. Gonna need to use some floor polish on the arm holding it though
WHAT AM I THINKING?! I'LL GIVE IT TO ENERGON GALVATRON!!! Move over crappy small Energon Saber!!

There you go! That's the one.
I tried to get Volcanicus to hold it. NOPE! Now I'm suddenly wishing I had CW Armada Megatron. Old school Armada Megs is rocking the original Dark Saber over here.

News Credits: 1350 · by **ZeroWolf** » Tue Feb 27, 2018 10:13 am

It's a shame that the arms of the gesalts aren't strong enough to hold two deluxes like that (not that hasbro ever expected that :lol:

)

News Credits: 1641 · by **D-Maximal_Primal** » Tue Feb 27, 2018 6:56 pm

Cobotron wrote:BEHOLD THE POWER OF DARK SABER!!!!!!!

YEESSSSSSSSSSSSSSSSSSSSSS

News Credits: 42 · by **Autobot N** » Tue Feb 27, 2018 9:46 pm

The Dark Saber is cool and all, but I'm more interested in this:

: Cobotron.jpg (27.97 KiB) Viewed 2575 times

News Credits: 293 · by **shajaki** » Tue Feb 27, 2018 9:52 pm

We interrupt this POTP discussion for the following announcement:
Cobs, you're old like me right? Have you seen these?

They're figures of the Millennium Falcon monster chess! Unfortunately they seem pretty pricey... but damn that would be cool to have 8-}

News Credits: 1350 · by **ZeroWolf** » Wed Feb 28, 2018 1:34 am

Have they made the full set or just those two? Ah I still waiting for the day where technology catches up where they can make that in reality, as shown in the movie.

News Credits: 15 · by **galvatron00** » Wed Feb 28, 2018 5:52 am

@ZeroWolf, I have the Jedi Challenges AR headset and app for my phone, Holochess is one of the games! It's really awesome!!

News Credits: 41 · by **Cobotron** » Wed Feb 28, 2018 7:45 am

Those are awesome Jak! I feel like I've seen those before, but not sure if those are the same ones I've seen. Those are some nicely sculpted maguettes.
Cram, I thought the holochess on that VR game you got looked like maybe the coolest game built into that unit.

LET THE WOOKIE WIN!!!!!!

News Credits: 4501 · by **william-james88** » Wed Feb 28, 2018 8:10 am

Cobotron wrote:LET THE WOOKIE WIN!!!!!!

Let him eat too!

News Credits: 41 · by **Cobotron** » Wed Feb 28, 2018 8:11 am

william-james88 wrote:
Cobotron wrote:LET THE WOOKIE WIN!!!!!!

Let him eat too!

Roasted Porg?

News Credits: 4501 · by **william-james88** » Wed Feb 28, 2018 8:17 am

Cobotron wrote:
william-james88 wrote:
Cobotron wrote:LET THE WOOKIE WIN!!!!!!

Let him eat too!
Roasted Porg?

Hell yeah, looked delicious!

News Credits: 226 · by **Burn** » Thu Mar 01, 2018 11:58 pm

So Cobes ... given you just cost me seventy odd dollary-doos ... must be time you spread the news. :wink:

News Credits: 41 · by **Cobotron** » Fri Mar 02, 2018 1:31 am

Yup!

Thanks to the likes of Burn, Va'al, Billy Jim, and a slew of other fine friends and family, The Axiom Chronicles Kickstarter campaigne reached it's goal.
We're FUNDED! Time to get to work!

link is a link
https://ksr-video.imgix.net/assets/020/407/981/8a14cabf075562f64a2dd023a30c3456_h264_high.mp4