Seibertron.com Energon Pub Forums

by **Tirade** » Wed Apr 21, 2010 12:19 pm

MatrixWithinUs wrote:I don't know if this matters. I read some replies about how you can't see Hot Rods' yellow spoiler. I think if you fold down the figures original forearms, they won't interfere with the add on armor and you will be able to see the spoiler more. Just an observation and opinion. I dunno.

Hmmm, that sounds like a good idea. Most of that shoulder region is obstructing the view of the spoiler/wing. I wonder if there is enough room there to fold it down. Of course I still don't think it would be that hard to include a wing extension or just a brand new wing to install.

News Credits: 88 · by **DavidT** » Wed Apr 21, 2010 12:35 pm

I know it kinda sucks, but if you pull out on the red piece on his back a little, it'll bring the spoiler pieces higher up... just rotate the spoilers pieces up and down after you pull the back piece out some... Probably look fine looking from the front but suck from the side... I could probably live with that...

.

News Credits: 5 · by **zodconvoy** » Wed Apr 21, 2010 4:09 pm

Back when the first blurry prototype picture surfaced last August, I emailed them and asked which Hot Rod was its color scheme being designed for and they replied:

FansProject wrote:We are still working on the color design, we try to make it fit both versions.

That's why I got me a Henkei Rodimus last summer! I had also commented they could include their canceled Matrix with it, you know for him to protect, but they didn't respond to the suggestion.

News Credits: 402 · by **Mkall** » Wed Apr 21, 2010 4:21 pm

zodconvoy wrote:Back when the first blurry prototype picture surfaced last August, I emailed them and asked which Hot Rod was its color scheme being designed for and they replied:
FansProject wrote:We are still working on the color design, we try to make it fit both versions.

That's why I got me a Henkei Rodimus last summer! I had also commented they could include their canceled Matrix with it, you know for him to protect, but they didn't respond to the suggestion.

It would be cool if he came with some sort of Matrix.

News Credits: 3 · by **Dread_Wing** » Wed Apr 21, 2010 7:05 pm

Regarding the spoiler/wing thing, I am surprised Fansproject did not just replace the two wings with new parts that would integrate better into their trailer, and stand higher on the robot mode. The parts do just snap in and out of Hot Rod's back after all.

by **Tirade** » Wed Apr 21, 2010 8:37 pm

Dread_Wing wrote:Regarding the spoiler/wing thing, I am surprised Fansproject did not just replace the two wings with new parts that would integrate better into their trailer, and stand higher on the robot mode. The parts do just snap in and out of Hot Rod's back after all.

Yeah, I thought the exact same thing. I e-mailed them about that idea (of replacing the wing for robot mode).

News Credits: 2 · by **TFBuyer** » Thu Apr 22, 2010 8:01 am

One of my favorite parts about this upgrade: the way FP has managed to mold the exhaust pipes onto the add-on, and then sculpt flames coming out of them to boot! Looks awesome.

Can't wait.

News Credits: 11 · by **kirbenvost** » Thu Apr 22, 2010 1:07 pm

I agree, the molded pipes and flames are totally badass. Can't wait to see it in color.

The idea of some add-on wings for Rodimus is good, I'm also suprised they didn't consider it.

I'm so excited for this I decided to get my Reissue Rodimus Prime out of storage.

News Credits: 5 · by **--B--** » Thu Apr 22, 2010 1:17 pm

kirbenvost wrote:The idea of some add-on wings for Rodimus is good, I'm also suprised they didn't consider it

Add on set later on, ala CC's rifle/rocket launchers anyone?!

They already know it will sell.

News Credits: 4 · by **craggy** » Thu Apr 22, 2010 3:42 pm

it looks good, too bad I don't have a Classics or Henkei Rodimus.

Does anyone else think that the gun emplacement thing looks a bit like the launcher from TF:TM? Maybe Warbot Defender will have better things to do tonight.

News Credits: 1 · by **Droptested Thrice** » Fri Apr 23, 2010 1:41 am

Niiiiiiiiiiiiiiiiiiiiiiiice.

Hopefully that weapons platform has more features than what the pics show so far.

by **ryan.rhoads** » Fri Apr 23, 2010 11:22 am

I am soooo stoked!!!! FP please take more of my money :BOOM:

. I owe everything they have put out except for D.I.A. Looks great can’t wait for colored pics. Gun station is so so, I get the G1 homage, but wish they could have used more of the trailer for armor.

News Credits: 2 · by **Sideswipe 00** » Sun Aug 08, 2010 10:33 am

So this does work with either Henkei or Classics Rodimus?

News Credits: 668 · by **Autobot032** » Sun Aug 08, 2010 10:38 am

Sideswipe 00 wrote:So this does work with either Henkei or Classics Rodimus?

Yes. The molds for the Hasbro Classics version and the Henkei version are one and the same. It's merely a color scheme change that differentiates the two.

And the Target exclusive in Anime colors will also work with it. It may not look as good as the other two, with the armor, but yes, it too will work.

News Credits: 2 · by **Sideswipe 00** » Sun Aug 08, 2010 10:40 am

yeah It def would not have the same effect

News Credits: 2 · by **Stockade** » Tue Aug 10, 2010 9:38 am

Counterpunch wrote:For those that have both Classics Rodimus and Henkei Rodimus, I think it'll be best to use Classics Rodimus in this. The armor will hide his inferior chest plate and you won't scratch the chrome when in vehicle mode.

Thanks for the heads up about this Counterpunch, i do have both versions of Hotrod and I'll user the Hasbro version, while the Henkie will stay in plastic sleep chamber..

News Credits: 767 · by **Dead Metal** » Tue Aug 10, 2010 9:49 am

--B-- wrote:
kirbenvost wrote:The idea of some add-on wings for Rodimus is good, I'm also suprised they didn't consider it

Add on set later on, ala CC's rifle/rocket launchers anyone?!

They already know it will sell.

Judging by Vangelus's video on it, FP actually realised that people want it and have made clip-on extensions for the wings.

News Credits: 1 · by **Gauntlet101010** » Tue Aug 10, 2010 10:05 am

This is now in the wrong section isn't it? Although it's so nice it makes me wish Hasbro would make it a legit part of the TF Universe.

I wish that it would come with a Matrix, but that may be too much to hope for. They said before that they want to avoid using designs that match up too closely with HasTak's official ones.

I kinda wonder which figure FP will make this work with. Obviously either will do, but they might wanna integrate the spoiler into the flames and those spoiler extentions.

News Credits: 125 · by **Counterpunch** » Tue Aug 10, 2010 10:17 am

Gauntlet101010 wrote:This is now in the wrong section isn't it? Although it's so nice it makes me wish Hasbro would make it a legit part of the TF Universe.

I think it pre-dates the 3rd party section in terms of its first news link. Moving it now would mess up news feeds, etc.

News Credits: 5 · by **--B--** » Tue Aug 10, 2010 10:45 am

Dead Metal wrote:
--B-- wrote:
kirbenvost wrote:The idea of some add-on wings for Rodimus is good, I'm also suprised they didn't consider it

Add on set later on, ala CC's rifle/rocket launchers anyone?!

They already know it will sell.

Judging by Vangelus's video on it, FP actually realised that people want it and have made clip-on extensions for the wings.

Thanks for that DM, I had never seen it. It looks great, and will be a nice Christmas present for me! I am interested to see if the targetmaster they are talking about is included, or are they talking about G1 Firebolt or Universe Nightstick. I still have my G! Firebolt, so he will hopefully fit in Protector's fist.

News Credits: 125 · by **Counterpunch** » Tue Aug 10, 2010 11:04 am

I thought he meant the Nightstick targetmaster from Cyclonus.

Which means, Gentei Strafe's Targetmaster is perfect.

News Credits: 8 · by **LiKwid** » Tue Aug 10, 2010 1:21 pm

I think I was standing nearby when that video was being shot, I remember seeing that guy with the little wing exstensions in that plastic ziploc bag talking about it.. Honesty this makes me drool, Rodimus/Hot rod was always my favorite character and this is like totally awesome to see something like this getting made..

Thank you FP..You made my Christmas!( I hope so:P) I'm so buying like 2 or 3 of these...

News Credits: 3 · by **Kibble** » Tue Aug 10, 2010 4:57 pm

If this is due to ship by Christmas, why are there no pre-orders up for it yet? Do they mean Christmas 2011? What gives?

News Credits: 5 · by **zodconvoy** » Tue Aug 10, 2010 8:32 pm

Does anyone else get the feeling that the Classics 3-Pack coming out a few months (hopefully) before the Protector might be Hasbro realizing the cross market sales? It seems like a mighty huge coincidence that they reissue a now 4 year old mold for no apparent reason at this time.

News Credits: 3 · by **bvzxa** » Tue Aug 10, 2010 9:00 pm

I see the new Roller at the bottom of the gunstand. If you look where the small wheels are, it is shaped like the roller form the G3 Trailer. Because the proto is all gray you can't tell, but in that vid I can see where roller is.

Sweet!!