The Energon Pub

Omega-1 wrote:Perceptor recommends Chlorostop, lol. Sorry couldn`t help myself. But seriously, that`s some bad rust.

The real mystery now is how did all the smart asses on this board miss the Cosmic Rust jokes?

Corrostop like stopping corrosion, ain't it?

Back on subject... couldn't a light misting of a low gloss clear coat take care of continued rusting? You'll want to clean wants already visible, but a clear coat of paint should seal out water.

Counterpunch wrote:I noticed a little of that on mine the other day.

He's not crazy, the feet aren't chromed, they are metal.

The room my Megatron is in is mostly dry and Megs hardly ever gets touched. I think a lot of people are going to see this on their figures in time.

I'm really glad I didnt get this pos.

Go to a gun store. Seriously. Just ask them what they recommend to remove rust from metal. I had something, but now I can not remember what it was called.

Well that is unfortunate mine as of yet hasn't had that problem as of yet and I keep him displayed in robot mode.

0ctane wrote:
this is the best pic i could come up with for now, my camara goes blurry without the flash.


this is how i display megs.

so best bet would be to unscrew the feet and spray wd40 on it,wipe it off and add clearcoat. I only display him because i don't want to break him.



stoopid cosmic rust...

Yikes. It looks like your MP Megatron has been infected with the "Cosmic Rust".

Kidding aside, this is most interesting. It was reported recently that the price of die-cast has gone through the roof. It wouldn't be surprising that an inferior die0cast has been substituted.

Uh-oh. Mine has some pitting / spotting too. I never really looked at the feet in the past few months. Crap.

What really worries me is that his spine is also metal and really rather narrow.

*Stupid question time*

These are from china, and could have been shipped (on a boat).
Could "Sea air" accelerate rusting from the salt in the air?
I have bought a few things from California and the sea air seems to have an effect... Any thoughts?

Octane I feel your pain. Broke two small brittle plastic tabs by transforming him a couple of times. Broke it in less of a week. Mp 6 Megatron is cheaply done. You can't transform him much. Only display him for a little while but not the whole day or it will get cosmic rust later. I wish the Chinese bootleggers made some replacement parts for him.
But seriously this collector's toy is a bad investment. It's overpriced and it's junk. Just had to say it. I've been frustrated since I've bought it on early April. Several months ago.

Well since it's late and I am bored and the fact there are only 2 pages thus far, I read through all the ideas... and yeah WD-40 is your best rust remover... the clear coat is a real critical choice, the best clear coat to buy in the Hobby world or any market for that matter is the Tamiya Flat clear coat..

Let me give you an example of how powerful this stuff is.....

Once apon a time there were only soft vinyl static Guyver model kits, and not the fine quality toys we have today, a young amatuer hobbyist with a little professional help succeeded in painting a Guyver 1 limited figure that was authentically MAX Factory....the Model came out wonderfully.. all that was left was to let it dry overnight and clean and paint a clear coat over the painted work of art..

The next day to the hobbyists horror the model was still sticky to the touch.. 3 days past and no change, to his dismay the amatuer hobbyist called the professional who preceded to explain that TESTORS ENAMEL paints are in no way suitable for Vinyl!!!! Acrylics is what is used for that
type of material..with a whole in his heart he asked if there was anything that he could do..???

The Professional replied, Yes!! let me tell you of a Product called Tamiya Clear coat....this should fix the problem, he said... and with heavy coats of clear coat and a days worth of drying..the model was finally "almost" entirely sticky free..!!!

I asked the Professional what would have happened over time had I left it without the clear coat?? he said he was amazed that it hadn't melted or degraded in some way.. that was 7 years ago, I still have that model, and I think that the only reason it is still in perfect condition is because it's held together completely by Tamiya Clear Coat...Now I freaking Swear by that stuff!!!

Damn!
Just when you thought it was so great to have an MP Megatron...
I blame Hasbro.

In fact I think I am gonna stop by the parents house, open my boxed Megatron and paint some clear coat on the feet just in case...I don't want it to rust down the road...might as well save me some WD-40 work..

Damn mine is two...

I just went to check mines, and yes a bit rusty, kinda pisses me off, but I'll try the vinegar.

MP Megatron + (Cosmic)Rust ? Too much of a coincidence! Sorry I can't contribute with tips since I don't have one and therefore have not such an ordeal.

0ctane wrote:

ACK! Mine is doing the exact same thing. I just treated his metal parts with some WD-40. It seemed to clean up easy enough. I just transformed the legs on the one I keep in gun mode that I haven't handled since I removed it from the package ... same exact damn thing. That's most frustrating! Definitely something to keep our optics on.

I haven't noticed anything on mine yet, but should I soak the parts in vinegar/wd 40 or just wipe them down?

Also, I thought the parts were made out of zinc. The MP-1 manual states that's what Prime's made of.

Phew, my MP Megs feet are safe. But I will use those steps to try and protect him.

Mine looks fine...

and I'm in humidity city...

The ultimate G1 homage- the figure rusts in a fashion identical to the original.

Zinc readily oxidizes- uncoated zinc would be a poor choice for die-cast metal, despite its low melting point.

sadly, mine is showing signs of yellowing already =\

Basketball Jones wrote:Zinc readily oxidizes- uncoated zinc would be a poor choice for die-cast metal, despite its low melting point.

Also, soak the parts or just wipe them down?

I do have some vinegar, but it's all diluted for use in food. Is that good enough to use or do I need to get something stronger or just get the wd 40?

I'm trying to understand why they don't just use aluminum. Yeah you'd probably be better off machining the pieces instead of trying to cast them but still, it would not be "rusting" as badly as these are. Not to mention that you could get a chunk of aluminum the size of his foot for like 10 cents.

Hey, I am one more victim! Dry place and feet rusted.

+1

Mine's untouched.....box to display shelf only

I was serious about going to a gun store for rust removal. Or go online and...

Get this:

http://www.opticsplanet.net/hoppe-quick ... -1215.html

Or this:

http://www.birchwoodcasey.com/sport/blu ... prodcat=55

And make sure to get this:

http://www.wilsoncombat.com/a_cleaning_cloth.asp

Your own fingerprints and body oil causes oxidation. This will help prevent rusting after handling.