The Energon Pub

News Credits: 118 · by **megatronus** » Tue May 05, 2015 9:08 pm

Nice review! Thanks for sharing.

Do we have information on whether a new Kickstarter is going up, or if PWTT is taking a different route to bring their product to production?

News Credits: 49 · by **Scaleface** » Wed May 06, 2015 6:06 am

megatronus wrote:Nice review! Thanks for sharing.

Do we have information on whether a new Kickstarter is going up, or if PWTT is taking a different route to bring their product to production?

The only official news I know so far is that the BMOG platypus will be at BotCon 2015. They are making plans for SOMETHING.

by **Robogeek1973** » Wed May 06, 2015 2:19 pm

Whatever they're planning, I hope it gets me that Terrortops.

That's the one figure I wanted the most from these guys.

News Credits: 49 · by **Scaleface** » Wed Jun 03, 2015 5:30 pm

Well We have been seeing some teasers lately from Play With This Too. They seem to be implying something with the Boneyard (not-Grimlock) mold. I heard there is a big convention somewhere in Chicago soon. Perhaps we will hear more there.

Also, I posted my Review of a weapon called the Saw Slasher Scythe, this is the hand weapon intended to be used by Bloodbath (not-Bomb-Burst) and Sir Pythanore figures if they ever get made. The one I reviewed was just a 3d printed prototype that had been painted.

https://www.youtube.com/watch?v=uZHUwvlORrA

News Credits: 49 · by **Scaleface** » Wed Jun 10, 2015 11:16 am

I see they posted another weapon render on their Facebook page. Seems to be the mace weapon they advertised with their Jetstrike and Sir Fangramore LeVenomous figures.

I sort of wish they would release these on Shapeways just so we could try them out on MOTUC figures while they are re-working their plans.

News Credits: 49 · by **Scaleface** » Tue Jun 16, 2015 7:06 pm

Another image of the dinosaur skull shield went out today. According to Play With This Too's Facebook page the full figure reveal will come Thursday night at a pre-BotCon party.

I also noticed that the image is tagged #boneyard on Tumblr. As you may recall Boneyard was one of the late stretch goal figures from the Kickstarter, and was one a lot of people said they should have started with. Perhaps it's been bumped up the design ladder and has new accessories?

News Credits: 49 · by **Scaleface** » Fri Jun 19, 2015 8:47 am

Play With This Too has revealed the first images of one of the figures to be part of their revival.

[quote=Play With This Too]
Redesigned and ready for print! Our next reveal will be the 3D renders for Jetstrike. Both figures will be part of our Kickstarter "Remix" right out the gate. Prototypes and more info coming soon!
[/quote]

According to Facebook responses, they plan to have printed and painted prototypes before the new Kickstarter begins. A definite improvement! I think people will like seeing the physical toys.

http://www.playwiththistoo.com

News Credits: 12 · by **Evil Eye** » Fri Jun 19, 2015 1:35 pm

That's more like it! Boneyard looks awesome. Dat axe, man...

by **Lord Raze** » Fri Jun 19, 2015 2:12 pm

Delta Magnus wrote:That's more like it! Boneyard looks awesome. Dat axe, man...

I wonder what Slag did to annoy Grimlock enough to seal his fate like that.

News Credits: 1 · by **rpetras** » Fri Jun 19, 2015 5:49 pm

Good, it look s like they may have learned from their mistakes.

News Credits: 118 · by **megatronus** » Sat Jun 20, 2015 9:28 pm

That's quite fetching! I like it.

If PWTT proves they learned from their myriad unforced errors, I'll be happy to support them.

News Credits: 49 · by **Scaleface** » Sun Jul 05, 2015 7:06 pm

Play With This Too recently announced on their Facebook page that Boneyard and Jetstrike will each ship with two additional heads. So if there were any of the head from those Head Shots they teased back in the first Kickstarter, and thought would look good on a gladiator or jet armor body, this would be a good time to tell them.

https://www.facebook.com/PWTToo/photos/ ... =1&theater

They said Boneyard is getting 3 recolors. So molding a total of four heads for it makes sense. One head to be the main head for each deco of the body. Then with the four weapons, each of the four color variations can have different a head and weapon.

I posted that I would like to see the undead warrior Litchknife and the dinosaur headed Big Mac Roche on Boneyard.

News Credits: 49 · by **Scaleface** » Sat Jul 11, 2015 5:17 am

Two recent tweeted replies from Play With This Too might be of interest to those following them...

@JasontheDoombot Jetstrike is almost done. Just want to get Boneyard printed and shown before we reveal the redesigned Jetstrike.

and

@deathformer Looking to launch it later this year in a few months. Hopefully around September/October? Not trying to wait until 2016.

So Jetstrike's render will be revealed after we see the Boneyard prototype, and the Kickstarter could start as soon as 2-3 months from now!

Also, just announced, the Boneyard figure prototype will be revealed at TFcon Canada 2015!

News Credits: 49 · by **Scaleface** » Thu Jul 16, 2015 5:37 pm

New image from Play With This Too for the upcoming TFcon 2015 reveal.
Of course the obligatory fan-made enhancement of the image using autolevel on a paint program so you can see the details.

https://www.facebook.com/PWTToo/photos/ ... =1&theater

News Credits: 49 · by **Scaleface** » Mon Jul 20, 2015 8:28 pm

The Boneyard unpainted prototype was on display at TFcon Tornoto 2015, as well as appearing in the TFcon third party product preview panel. For those interested, here is a peek:

They have said they are revising some details and sizes already, and have a second prototype being done now, and a prototype for their other figure, Jetstrike, is on the way. Here is a teaser:

News Credits: 118 · by **megatronus** » Mon Jul 20, 2015 8:32 pm

Pretty badass looking!

News Credits: 10 · by **Agamemnon** » Mon Jul 20, 2015 9:14 pm

I miss my Diablo homage.... :-(

But, indeed, these are looking very good....

News Credits: 33 · by **Genocide G2.0** » Fri Jul 24, 2015 4:37 am

News Credits: 33 · by **Genocide G2.0** » Sat Jul 25, 2015 5:52 am

News Credits: 118 · by **megatronus** » Sat Jul 25, 2015 8:18 am

@ Genocide

Love that sig pic! Brawl in suspenders, LOL.

by **Rated X** » Sat Jul 25, 2015 9:57 am

megatronus wrote:@ Genocide

Love that sig pic! Brawl in suspenders, LOL.

I love it too. Thats supposed to be some sopranos type mafia s**t im guessing. Kinda wish onslaught was the tallest though. I guess the artist was thinking real life alt modes when he drew it.

News Credits: 226 · by **Burn** » Sat Jul 25, 2015 5:50 pm

It's a nice sig and all, shame it's too large. :wink:

News Credits: 650 · by **ScottyP** » Sun Jul 26, 2015 3:58 pm

Wait, are these not coming with those little robot drone buddies anymore? They were the only mildly interesting thing about this project :/

News Credits: 5 · by **alexison** » Sun Jul 26, 2015 4:21 pm

ScottyP wrote:Wait, are these not coming with those little robot drone buddies anymore? They were the only mildly interesting thing about this project :/

I agree man. I'm even an action figure guy & I just can't get excited about these.

News Credits: 49 · by **Scaleface** » Sun Jul 26, 2015 5:15 pm

ScottyP wrote:Wait, are these not coming with those little robot drone buddies anymore? They were the only mildly interesting thing about this project :/

They are still planning on the robot drones. It's just the Kickstarter is starting out with only the 6 inch figures first, then the robot drones will be a stretch goal.

I know this seems odd, but back in the last Kickstarter they had two full tech drones as part of the base funding level, and only got about 90% funded. So by making the drones stretch goals, they can try to get to the 100% funded mark sooner. Usually once campaigns are 100% funded they accelerate funding, so I think they are trying to get this campaign to get to 100% as quickly as possibly.

Remember that you can drop pledges if they don't get the stretch goals unlocked on the last day, so it will probably be smartest to pledge for all the figures you want up front, then watch to see if they unlock the drones by the last say. If they drone as unlocked, you are all set to get them.

Honestly, I want the PWTToo Grimlock-drone, but for Starscream-drone I'll probably just use a Hasbro Legends Starscream figure I already own anyways.