The Energon Pub

News Credits: 19 · by **Carnivius_Prime** » Thu Jul 28, 2016 10:32 am

Really liking a lot of the Titans stickers. Definitely getting the PM Prime one (if I can ever find the figure for sale and at a sensible price.. someone offered me it for £80 and I was like.. uh.. no). It adds so much detail to a figure I found very bland in places.

News Credits: 191 · by **Kurona** » Thu Jul 28, 2016 10:45 am

Carnivius_Prime wrote:(if I can ever find the figure for sale and at a sensible price.. someone offered me it for £80 and I was like.. uh.. no)

Seriously? The hell was doing that?

News Credits: 2 · by **Hero Alpha** » Thu Jul 28, 2016 11:10 am

It would be sweet if they sold sets of the round bot/con symbols that fit in the screw slot on Titan masters. That Cerebros set is great. Reminds me that I only want him, w/o having to buy Fortress Maximus hehe.

News Credits: 14 · by **DecepticonFinishline** » Thu Jul 28, 2016 11:19 am

I'm really not digging theses WfC/FoC faction symbols.

Looks god otherwise, though. I especially appreciate the tinting on Blaster.

by **Transformers123** » Thu Jul 28, 2016 1:08 pm

R they gonna make a set for the whole fort max. Coz I want 2 order the cerebros stickers now before the prices go up but I don't want to waste my money in case they make a fort max set coz i'll waste my shipping fee if I buy them separately. Someone please help me!!!

MyFigureCollection.net collection · by **Emerje** » Thu Jul 28, 2016 11:35 pm

How could they not do a visor sticker for Skullsmasher? Seems so obvious.

Emerje

News Credits: 6188 · by **Va'al** » Thu Sep 08, 2016 7:55 am

We have the September update from the folks over at ToyHax/Reprolabels, as the Titans Return focus continues in their output of stickers to spruce up your Transformers figures - find out more about the new sets below!

This is no ordinary Reprolabels update

We're continuing our line for Titans figures with brilliant little sets for Wheelie and Buzzsaw:
http://toyhax.com/for-titans-ret/2168-l ... eelie.html
http://toyhax.com/for-titans-ret/2161-l ... zzsaw.html

But it's the set for Fortress Maximus that's really been consuming our attention lately. It's easily the most ambitious project we've ever worked on, and it contains a very unexpected surprise for those willing to peruse all 12 of its photo layouts:
http://toyhax.com/for-titans-ret/2164-l ... rtion.html

Did you end up with the SDCC sword for Fort Max? Because if so, look here:
http://toyhax.com/for-titans-ret/2152-l ... sword.html

And we're not done! We're still working on sets for Combiner Wars:
http://toyhax.com/for-comb-wars/2163-la ... erion.html
http://toyhax.com/for-comb-wars/2159-la ... orion.html

Including the first of a line of crazy conversions by one of our newest designers:
http://toyhax.com/for-comb-wars/2155-la ... older.html

Not to mention plenty more for RiD:
http://toyhax.com/for-rid-prime/2151-la ... fixit.html
http://toyhax.com/for-rid-prime/2154-la ... rhoof.html
http://toyhax.com/for-rid-prime/2156-la ... ronus.html

And here's our amazing set for Masterpiece Ramjet:
http://toyhax.com/for-masterpiece/2167- ... amjet.html

Adding to our symbols section, did you know Gobots had faction symbols?
http://toyhax.com/symbols-for-tf/2158-g ... mbols.html

Finally, some sets for unofficial toys that have been requested, starting with one for FT Willis:
http://toyhax.com/mp-scale/2162-labels- ... illis.html

FP Browning:
http://toyhax.com/standard-scale/2165-l ... wning.html

And finally, the first set for TFC Hades:
http://toyhax.com/mp-scale/2153-labels- ... natos.html

News Credits: 19 · by **Carnivius_Prime** » Thu Sep 08, 2016 8:28 am

Hm plastic fillers for Cerebros? Not that I plan to buy Fort Max but that's an interesting addition and I wonder if they'll provide similar things for other figures in the future.

News Credits: 191 · by **Kurona** » Thu Sep 08, 2016 8:42 am

Victorion set looks pretty nice. Not sure if it'd do much if I got it tho.

by **mblase75** » Thu Sep 08, 2016 8:55 am

I laughed at Wheelie's rear license plate: "FRIEND find, look behind!"

by **RNSrobot** » Thu Sep 08, 2016 12:17 pm

Kurona wrote:Victorion set looks pretty nice. Not sure if it'd do much if I got it tho.

Looks like some nice highlights but nothing I desperately need (or would really even notice). I actually need to buy a couple sheets of Autobot stickers. I really want to put a logo on the hoods of each of the cars, especially the lambo. Not sure if I want to do clear or white backed though.

The Buzzsaw tape is awesome, but I also don't want to ruin the stock "screen" stickers. If they continue to pull off though I'm in.

Wheelie is cute, I like the jungle necklace. =)

News Credits: 191 · by **Kurona** » Thu Sep 08, 2016 12:31 pm

RNSrobot wrote:
Kurona wrote:Victorion set looks pretty nice. Not sure if it'd do much if I got it tho.

Looks like some nice highlights but nothing I desperately need (or would really even notice). I actually need to buy a couple sheets of Autobot stickers. I really want to put a logo on the hoods of each of the cars, especially the lambo. Not sure if I want to do clear or white backed though.

That's a good point actually; the Torchbearers' Autobot symbols aren't that visible. And a big massive Autobot symbol slapped onto the hood... I think I'm a sucker for that sort of thing.

News Credits: 191 · by **Kurona** » Thu Sep 08, 2016 12:38 pm

Dr Va'al wrote:
Including the first of a line of crazy conversions by one of our newest designers:
http://toyhax.com/for-comb-wars/2155-la ... older.html

[/quote]
How did I not notice this before this is really impressive

News Credits: 11 · by **RAR** » Thu Sep 08, 2016 12:52 pm

Any sign of some Number plates stickers for Toyworld's Throttle bots ?

In either size...

----------

Looking at : http://toyhax.com/for-titans-ret/2164-l ... rtion.html

I would conclude the only stickers I'd like would be the ones that go in the interior of the repair bays and also a few key places around the body like the thrusters.

I can see why they wanted to do the stickers white but you'd likely only get the full effect if you disassembled your toy and sprayed the ramps white first.

News Credits: 650 · by **ScottyP** » Thu Sep 08, 2016 9:04 pm

Smolder!?

Does this mean a combiner of Power Core Combiners could be a thing?

Everyone buy that Smolder set. Do it now. President's been kidnapped. It's up to us.

News Credits: 191 · by **Kurona** » Fri Sep 09, 2016 3:53 am

To be fair some of the PCCs are pretty good toys themselves.

Not as combiners of course, those are terrible. But as fun little army-filling scouts.

News Credits: 3 · by **Optimizzy** » Fri Sep 09, 2016 8:24 am

wow. I like the idea to turn CW Ironhide into Smoulder.

News Credits: 1235 · by **LOST Cybertronian** » Wed Oct 12, 2016 10:16 am

Where should we even start? Our new expanded design team is kicking out mind-blowing sets this month!

First of all, the new set for TR Laserbeak is a demo set, so for now it retails for just ONE CENT. No kidding.
http://toyhax.com/for-titans-ret/2173-l ... rbeak.html

We also have an absurdly amazing set for TR Soundwave, including 3D speaker grills and dance floor:
http://toyhax.com/for-titans-ret/2172-l ... dwave.html

And lots more for the Titans line, including labels for Rumble, Chromedome and Highbrow:
http://toyhax.com/for-titans-ret/2194-l ... umble.html
http://toyhax.com/for-titans-ret/2185-l ... edome.html
http://toyhax.com/for-titans-ret/2184-l ... hbrow.html

We're not done with Combiner Wars either, so check out this set for the ENTIRE team of Technobots (All 7 of them!)
http://toyhax.com/for-comb-wars/2193-la ... utron.html

And wait... what's THIS!? You might want to get yourself another Combiner Wars Wheeljack:
http://toyhax.com/for-comb-wars/2175-la ... isher.html

And if you'd rather have some more G1 themed parts than just that CW weapon, you should see these:
http://toyhax.com/for-comb-wars/2189-pa ... ljack.html

Those same parts are also available as a package deal with the label set of your choosing:
http://toyhax.com/for-comb-wars/2190-pa ... isher.html
http://toyhax.com/for-comb-wars/2191-pa ... ljack.html

We've had a lot of requests for symbols more closely resembling the G1 cartoon design. So now you can get them in either "Cartoon Sloppy" or "Cartoon Clean" clear backed versions:
http://toyhax.com/symbols-for-tf/2177-c ... mbols.html
http://toyhax.com/symbols-for-tf/2180-c ... mbols.html

And because there are red Autobots and purple Decepticons, we have white outline versions of both:
http://toyhax.com/symbols-for-tf/2181-c ... lines.html
http://toyhax.com/symbols-for-tf/2182-c ... lines.html

Moving on to third party sets, we've completed the MTC Protectobots line with a set for Vulcan:
http://toyhax.com/standard-scale/2176-l ... ulcan.html

Omnigonix Spinout:
http://toyhax.com/mp-scale/2183-labels- ... inout.html

And finally, some truly huge finishing details for DX9 Gewalt:
http://toyhax.com/mp-scale/2192-labels-for-dx9-gewalt

by **SG Roadbuster** » Wed Oct 12, 2016 12:32 pm

and yet, still no Star Seeker faction symbols.

News Credits: 19 · by **Carnivius_Prime** » Thu Oct 13, 2016 4:33 am

Again actual accessories/parts as well as the usual stickers. I hope this continues. Hell, I'd love a full on service offering extra guns and small pieces to fill in hollow limbs and such.

by **RiddlerJ** » Thu Oct 13, 2016 8:18 am

I'm liking those Wheeljack parts.

They really need to put out some extra parts for the CW Technobots.

News Credits: 6188 · by **Va'al** » Thu Nov 10, 2016 9:25 am

A new update from the Reprolabels crew this month, featuring a lot of Transformers Titans Return sets to spruce up your figures. Check it all out below!

We have another impressive assortment this month, with labels for TR Astrotrain, Wolfwire and Mindwipe:
http://toyhax.com/for-titans-ret/2201-l ... train.html
http://toyhax.com/for-titans-ret/2207-l ... fwire.html
http://toyhax.com/for-titans-ret/2202-l ... dwipe.html

As well as a huge assortment of upgrades for the cassettes, starting with weapons for Laserbeak and Buzzsaw:
http://toyhax.com/for-titans-ret/2198-p ... rbeak.html
http://toyhax.com/for-titans-ret/2196-p ... zzsaw.html

And labels for Ravage, Stripes and Rewind:
http://toyhax.com/for-titans-ret/2213-l ... avage.html
http://toyhax.com/for-titans-ret/2210-l ... ripes.html
http://toyhax.com/for-titans-ret/2209-l ... ewind.html

A couple of brilliant conversion sets:
http://toyhax.com/for-comb-wars/2214-la ... allen.html
http://toyhax.com/for-titans-ret/2208-l ... ensor.html

And full sets for MP Sunstorm (2014 TRU version) and MP Loud Pedal:
http://toyhax.com/for-masterpiece/2211- ... storm.html
http://toyhax.com/for-masterpiece/2212- ... pedal.html

On the third party front, the Despotron and Mightron sets everyone has been clamoring for:
http://toyhax.com/mp-scale/2203-labels- ... htron.html
http://toyhax.com/mp-scale/2199-labels- ... otron.html

The next LER set:
http://toyhax.com/mp-scale/2206-labels- ... evero.html

And comprehensive sets for KFC's take on the Junkions:
http://toyhax.com/mp-scale/2205-labels- ... pyard.html
http://toyhax.com/mp-scale/2200-labels- ... shhog.html

Today is the final day you can add labels for TR Laserbeak to your cart for just one cent:
http://toyhax.com/for-titans-ret/2173-l ... rbeak.html

And finally, we're now offering free transparent backed white outline symbols, with every $20 you spend on labels for TFs:
http://reprolabels.com/

News Credits: 191 · by **Kurona** » Thu Nov 10, 2016 9:34 am

Spensor is :lol:

I need two Rewinds now!

Those parts for Laserbeak and Buzzsaw make them look extremely good. Literally went from an 'eh, okay' to a 10. I even love that makeshift tank mode, it's amazing what a few extra parts and repros can do! Honestly completely blown away.