The Energon Pub

Nemesis Primal wrote:

Madeus Prime wrote:

OptimalOptimus2 wrote:That headsculpt for Bludgeon doesn't say, Bludgeon. They need to give him something much more different, something, Bludgeonish, if you know what I mean.

I concur. As much as it's accurate to the original, I think everybody prefers his samurai head to any other alternative. Needlenose and Impactor are the highlights of this set.

It might not look like a samurai, per se, but it does still look like a martial artist, at least to me. Maybe it's the headband?

I know this is the wrong opinion to have, but I'm okay with the new head.

It's not wrong, I like it too, I mean, sure I'd rather have a crazy psycho-techno skull for a head, but nobodies done it well yet, so I'll take this, as it looks equally epic

i see Impactor does this mean we will see a combiner wars Ruination?

Ultra Markus wrote:i see Impactor does this mean we will see a combiner wars Ruination?

Anythign is possible with the CLub, but I wouldn't count on it unless we get a Botcon add-on. Say, Silverbolt or Scattorshot as Sandstorm and fill in the blanks. But as far as we know, No.

I do like this Bludgeon head. it's not the Samauri skull, but it's a nice enough head. I think what

Hellscream9999 wrote:Looks great

But, there seems to be something off - visually - with thunderwings head, maybe its the lack of symmetrical kibble on vortexs' shoulder, or it might be the colors, or the proportion of the face-to-helmet ratio, but somethings not sitting right with my brain

is seeing is a result of a non-final head skulpt. Your'e right, the head looks swollen compared to the helmet, not enough definition in the edge of the chinplate and his cheek structure. But the head also looks rough to me like a Shapeways print, so it's either bad lighting and bad paint or a rough head mould. And its a little big proportionately compared to what we have gotten, but a lot of times, TF heads, especially those from TFCC are smaller than proportionate to their bodies. So it may be that too.

This picture has me all kinds of excited for Stormbringer. I need a chain to hang the Matrix from his neck.

That is the stupidest looking combiner ever.

Rated X wrote:That is the stupidest looking combiner ever.

I think you're thinking of Big Rescue Force.

Flashwave wrote:

Ultra Markus wrote:i see Impactor does this mean we will see a combiner wars Ruination?

Anythign is possible with the CLub, but I wouldn't count on it unless we get a Botcon add-on.

The description for next year's TCC magaine story refers to Impactor as "the last of the Wreckers." So, it's possibly a sign that he's on his own now.

I think my appreciation for the Bludgeon's inner robot head is colored by the fact that I do own ROTF Bludgeon with the Headrobots upgrade. If I didn't, I'd probably want a samurai head too.

Also, I didn't realize Impactor is coming with some extra weapons - from Arcee of all places! That's actually really nice.

megatronus wrote:I think my appreciation for the Bludgeon's inner robot head is colored by the fact that I do own ROTF Bludgeon with the Headrobots upgrade. If I didn't, I'd probably want a samurai head too.

Also, I didn't realize Impactor is coming with some extra weapons - from Arcee of all places! That's actually really nice.

Yeah, I agree. The fact that I have a voyager & deluxe Bludgeon's with samurai head sculpts makes me less upset with the fact that the Club went this route, this time. I hope they tone down the green on Bludgeon. It looks really out of place in combined mode in my opinion.

I'm also surprised the Club decided to add all of the black panel lines to the top of Impactor's head sculpt. I've seen a lot of people complain about that on MMC's Spartan.

TF_JW wrote:Impactor vs... Thunder Mayhem!!

A reminder, these are first samples. Some colors and paint may vary from the final releases.

https://twitter.com/The_TF_Club/status/682758291135541248

thunder_mayhem_impactor.jpg

Little surprised those Targetmasters aren't combined. Heck, I only have Scoop thus far, but fiddling with him gives me the impression it's probably even possible to stick all four together.

Ultra Markus wrote:i see Impactor does this mean we will see a combiner wars Ruination?

I hope not. I'd rather see Ruination go back to being a Decepticon combiner some day.

...

I can dream, right?

Rated X wrote:That is the stupidest looking combiner ever.

Ha ha, not even close.



Or if you really want to scrape the bottom of the barrel...

He honestly does look pretty good. they all do

Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

It's a murder team from Candyland, what do you expect?

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

That's differebt, though... They're meant to homage the originals, one of them having a limb that is susceptible to GPS, the other having never been released save the one limb. What I'm getting at is that they could've engineered Menasor better, IMO.

Mindmaster wrote:

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

That's differebt, though... They're meant to homage the originals, one of them having a limb that is susceptible to GPS, the other having never been released save the one limb. What I'm getting at is that they could've engineered Menasor better, IMO.

They're both equally stupid, if only for different reasons

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

I actually kinda love G2 Superion's colors, but hate Menasor's.

SillySpringer wrote:

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

I actually kinda love G2 Superion's colors, but hate Menasor's.

Yeah, they do kinda work, but they're still kinda nasty, but, yeah, G2 Menasor and Defensor did take it a little over the top

Hellscream9999 wrote:

SillySpringer wrote:

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

I actually kinda love G2 Superion's colors, but hate Menasor's.

Yeah, they do kinda work, but they're still kinda nasty, but, yeah, G2 Menasor and Defensor did take it a little over the top

I think the g2 Superion colors work perfectly for CW Arielbots, and am kinda tempted to get that set...

SillySpringer wrote:

Hellscream9999 wrote:

SillySpringer wrote:

Hellscream9999 wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

And let's not forget the horrid G2 combiner color palettes

I actually kinda love G2 Superion's colors, but hate Menasor's.

Yeah, they do kinda work, but they're still kinda nasty, but, yeah, G2 Menasor and Defensor did take it a little over the top

I think the g2 Superion colors work perfectly for CW Arielbots, and am kinda tempted to get that set...

Yeah, the aerialbots hit it outta the park, I'd say it's a great buy

Hellscream9999 wrote:Yeah, the aerialbots hit it outta the park, I'd say it's a great buy

Aww man now I am dying to get it.

SillySpringer wrote:

Hellscream9999 wrote:Yeah, the aerialbots hit it outta the park, I'd say it's a great buy

Aww man now I am dying to get it.

Bummer

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.[/quote]

I never did the hip thing with menasor and never will. The cool thing about menasor is you have options on how to pose the thighs. Theres a wide range of add ons you can buy from perfect effect and nonneff that can help turn menasor into a awesome looking display piece. Thunder mayhem however, just has a stupid looking thunderwing head that nobody wanted. No matter what cool add ons you enhance the body with, that stupid head has to go. Maybe renderform can do a run of Bludgon skull heads that look better and would have been what most people wanted. What I would have preferred was no bludgon at all and no mayham attack squad theme. I would have preferred Windsweeper as the torso from the silverbolt mold and a new head. (Both modes work perfect to homage the vintage toy) and I would have liked to see Quake from the brawl mold also with a new head and Crankcase from the Offroad mold with a new head. Impactor was another waste of a figure. We already have an Impactor repaint from Hasbro. We dont need another one. At TFCC prices, one can just spend another 20 bucks and get MMC Spartan which is a much better Impactor anyways. So in essence, a perfect funpub 4.0 set would have consisted of all 3 triggercons and all 3 targetmaster juniors. That would have been so awesome. The whole marvel comics homage and additional funpub fiction ruined what could have been the ultimate G1 homage set for the fans. Who cares about the stupid combiner anyways? Everybody I know is buying the set for the individual bots anyways.

Rated X wrote:

Mindmaster wrote:

Rated X wrote:Let me re-phrase my comment...

This is the stupidest looking non-vintage combiner using CW molds...

I thought that would've been Menasor? What with the birth-giving hips that clash with the crotchplate when trying to get any good poses if you could prevent him from falling over due to the original run's sketchy nearly nonfunctional ratcheted hips....

...I should probably look into that for mine.

I never did the hip thing with menasor and never will. The cool thing about menasor is you have options on how to pose the thighs. Theres a wide range of add ons you can buy from perfect effect and nonneff that can help turn menasor into a awesome looking display piece. Thunder mayhem however, just has a stupid looking thunderwing head that nobody wanted. No matter what cool add ons you enhance the body with, that stupid head has to go. Maybe renderform can do a run of Bludgon skull heads that look better and would have been what most people wanted. What I would have preferred was no bludgon at all and no mayham attack squad theme. I would have preferred Windsweeper as the torso from the silverbolt mold and a new head. (Both modes work perfect to homage the vintage toy) and I would have liked to see Quake from the brawl mold also with a new head and Crankcase from the Offroad mold with a new head. Impactor was another waste of a figure. We already have an Impactor repaint from Hasbro. We dont need another one. At TFCC prices, one can just spend another 20 bucks and get MMC Spartan which is a much better Impactor anyways. So in essence, a perfect funpub 4.0 set would have consisted of all 3 triggercons and all 3 targetmaster juniors. That would have been so awesome. The whole marvel comics homage and additional funpub fiction ruined what could have been the ultimate G1 homage set for the fans. Who cares about the stupid combiner anyways? Everybody I know is buying the set for the individual bots anyways.

I'd sooner get it for the combiner than for any other reason, but I also see how it fills in a noticeable gap in G1 collections; but I do agree on the Impactor aspect, no matter how you look at it, it isn't a good deal, and you may as well get mmc's if you're going through the secondary market to get the set.

Other than the pink/purple Spinister arm, I think the combiner looks fine. Even then I can easily live with it.

As for Bludgeon... I'm surprised to hear all the discourse. With the popularity of his "shell" we're actually pretty lucky to get a modern taste of his proper bot mode. Besides, putting a samurai skull head on that body would look out of place, whereas the ROTF body is designed entirely around that motif. I look forward to standing the two Bludgeon's right next each other.