The Energon Pub

[Sabrblade]

Getting G1 Rad makes me really wish we could get a new Rad to go with lionizer. It also makes me think that Lionizer really needed an orange body, though I like that he is a sword now.

Cybertron Smokescreen makes for a decent Rad stand-in, especially with that Rad-looking head of his.

[chuckdawg1999]

So for those that have Galaxy OP does the figure's legs drift apart some when in robot mode? I just saw a video review where I noticed this and it bugged me enough. I don't care for UM but did he have that same issue? Do you care...can anyone weigh in? My thanks in advance.

Yes, I mentioned it in my review too. It seems to happen when it's fully armored.

[Lunatic Prime]

For what it's worth I've noticed Siege figures have a bad habit of always having one loose (or at least, looser than the other) ankle pivot. I'm not sure if it is bad luck on my end or the fact its a very supportive joint but for some reason they all got one foot looser than the other.

I didn't notice this on mine. Maybe there are some a bit looser but not that much that they'd move only because of gravity. The hip joints in comparison are a whole other story. But I guess it's because the SIEGE figures' limbs are more heavy than others'. Voyager OP for example with his stuffed legs and backleg covers and screws to keep them in place. That's a lot of more weight than figures got before.

[ZeroWolf]

Thanks to fellow Seibertron user and Toy Reviewer, Chuckdawg1999, we have a brand new English review of the newest Leader Class release for the Transformers War for Cybertron Siege line, Galaxy Upgrade Optimus Prime! This toy (which several users have been able to find at retail) is a retool of the previously released Leader Class Ultra Magnus mold, now redesigned to look like Optimus Prime's Super Mode from the Cybertron cartoon and toyline. The inner prime resembles a more stylised G1 Optimus Prime.

Check out what Chuck has to say here and watch his review which we have embedded for your convenience.

While there are a few flaws to Galaxy Upgrade Optimus Prime, the figure is a great tribute to the classic Cybertron Leader Class figure. The armor comes together nicely although getting it situated on the back can be tricky. It also would've been nice to see some extra folding bits on the cannons that could replicate the spring-loaded features from the original toy too. Overall it cuts an impressive silhouette and would look good on any shelf.

What do you think of this review? Will you be tracking this version of Optimus Prime down? Let us know in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!

[zatara1701]

Just snagged mine at Walmart on lunch...canceled my Hasbro Pulse pre-order lol...

I am looking forward to opening him up and checking him out!!

[D-Maximal_Primal]

Cybertron Smokescreen makes for a decent Rad stand-in, especially with that Rad-looking head of his.

Hmm, I've heard of that, but haven't looked into it too much. Might need to

[SGMLordMirage]

Finally hit jackpot and found WFC-S40 Galaxy Upgrade Optimus Prime. Wife needed to stop by a Walmart (Colonial Heights, VA) on our way to the base this morning, and there you have it.

I included a size comparison photo with my other OPs i have at the office.

enjoy,

SGM

[Nemesis Destron]

I too was lucky enough to find one without expectation at a local Walmart. I also found Laserbeak and Ravage set. Now I'm just faced with Prime...should he stay or should he go? Because of my knit picking on the legs and my lousy luck I'm sure the problem is going to be constant with every figure out there IMHO.

I'm just gonna have to stare at it unopened to get my answer damnation!

Thanks EVS and Chuckdawg for commenting.

[SpikeyTigertron]

I’m really torn in this guy. May cave if I see him in person. I’d snap up a Nova or/and Nemesis repaint in a heartbeat. Probably if they hadn’t used the cab bot in the comics, it would be an easier pass.

Chuck brings up a good point. A repaint of sixgun as Leo/Nemesis breaker would be awesome.

[SpikeyTigertron]

Also feel like he steals some is Ultra Magnus’ thunder....which is funny because I almost prefer Magnus in his cab form.... I guess the shorter/squarer/angrier prime works for him as a City Commander; and contrasts well with the voyager Prime which is taller/leaner

[Deathsanras]

It would be really awesome if video reviewers could learn to speak like actual human people.

[Hero Alpha]

I have a photo request if anyone can please. Would like compare pics of GU Leader Optimus in both armoured up and regular with Maketoys Cross Dimension Megatron, if someone owns both. Thanks.

[Sarahthecutevixen]

It has occurred to me I never linked to my review of galaxy optimus whoops
https://www.tfw2005.com/boards/threads/ ... 0.1172795/

[SGMLordMirage]

After watching the video again from Chuckdawg and listening to his comments, I looked over my Galaxy Upgrade Optimus Prime alittle more. Honestly after i got him to my office, I just opened it up and posed him and put him in place. I will say, mine does a at least have one loose leg. If you hold it up like Chuck does and shake it, the right leg on mine dangles so to speak.
I will add that in vehicle mode, the non painted wheels is not appealing and perhaps Toyhax will come out with something.
But all in all, still a cool figure in my opinion. I don’t own Ultra Magnus, so that would be a cool photo to see.
Who knows, may get him now.

SGM

[Rodimus Prime]

I picked up Galaxy Upgrade Optimus last night/this morning and played with him a bit. It's a good figure, but not worth $50. I actually don't like the super mode, so he will be displayed without his backpack. It will stay in the box. However, I think the Prime figure itself is too bulky for its legs (something that wasn't so apparent with Magnus) so I will be keeping his leg armor on, which will make him slightly taller and his legs not seem like chicken legs, like SS38's are. The truck mode is not too bad, but the faux wheels do take away from the image a bit. But it won't matter, because I'll be keep him in robot mode on the shelf.

I also picked up Aimless, so Misfire is now pleased.

[william-james88]

I picked up Galaxy Upgrade Optimus last night/this morning and played with him a bit. It's a good figure, but not worth $50. I actually don't like the super mode, so he will be displayed without his backpack. It will stay in the box. However, I think the Prime figure itself is too bulky for its legs (something that wasn't so apparent with Magnus) so I will be keeping his leg armor on, which will make him slightly taller and his legs not seem like chicken legs, like SS38's are. The truck mode is not too bad, but the faux wheels do take away from the image a bit. But it won't matter, because I'll be keep him in robot mode on the shelf.

I also picked up Aimless, so Misfire is now pleased.

Thanks for that nice succint review. Further cements my idea not to pick it up and simply be happy with the original.

I did find some new stuff today (well, new for me). Got Siege Ironhide and Sixgun. The panel on the right leg doesn't peg as is the case with everyone but it doesnt flap around at all and aesthetically it doesnt really change anything. I am quite happy about that since I expected so much worse after reading the comments.

[Wolfman Jake]

I did find some new stuff today (well, new for me). Got Siege Ironhide and Sixgun. The panel on the right leg doesn't peg as is the case with everyone but it doesnt flap around at all and aesthetically it doesnt really change anything. I am quite happy about that since I expected so much worse after reading the comments.

The side leg flaps on my Ironhide don't peg in too well, but it doesn't really matter, as they stay flush against the leg when in robot mode. The only real issue is that they fall off when you handle the figure, especially when transforming. Even if you're being as careful as possible, those panels will fall off at the slightest provocation. I wonder if we'll see a running change in the mold by the time Ratchet is released this fall.

[Sarahthecutevixen]

After watching the video again from Chuckdawg and listening to his comments, I looked over my Galaxy Upgrade Optimus Prime alittle more. Honestly after i got him to my office, I just opened it up and posed him and put him in place. I will say, mine does a at least have one loose leg. If you hold it up like Chuck does and shake it, the right leg on mine dangles so to speak.
I will add that in vehicle mode, the non painted wheels is not appealing and perhaps Toyhax will come out with something.
But all in all, still a cool figure in my opinion. I don’t own Ultra Magnus, so that would be a cool photo to see.
Who knows, may get him now.

SGM

Look closely at the detailing where the wheels are...LOOK CLOSER and you will see THEY ARE NOT WHEELS

[william-james88]

I did find some new stuff today (well, new for me). Got Siege Ironhide and Sixgun. The panel on the right leg doesn't peg as is the case with everyone but it doesnt flap around at all and aesthetically it doesnt really change anything. I am quite happy about that since I expected so much worse after reading the comments.

The side leg flaps on my Ironhide don't peg in too well, but it doesn't really matter, as they stay flush against the leg when in robot mode. The only real issue is that they fall off when you handle the figure, especially when transforming. Even if you're being as careful as possible, those panels will fall off at the slightest provocation. I wonder if we'll see a running change in the mold by the time Ratchet is released this fall.

Woah, wait a second, mine doesnt do that at all. It is very tight to the point where I was sure it was pinned.

[Wolfman Jake]

I did find some new stuff today (well, new for me). Got Siege Ironhide and Sixgun. The panel on the right leg doesn't peg as is the case with everyone but it doesnt flap around at all and aesthetically it doesnt really change anything. I am quite happy about that since I expected so much worse after reading the comments.

The side leg flaps on my Ironhide don't peg in too well, but it doesn't really matter, as they stay flush against the leg when in robot mode. The only real issue is that they fall off when you handle the figure, especially when transforming. Even if you're being as careful as possible, those panels will fall off at the slightest provocation. I wonder if we'll see a running change in the mold by the time Ratchet is released this fall.

Woah, wait a second, mine doesnt do that at all. It is very tight to the point where I was sure it was pinned.

I've heard reports both ways, that they're solidly in place, like yours, and that they're like mine, falling off at the drop of a hat. I'm not sure if it's a QC your mileage may vary sort of thing or if there was a running change and you got a later, revised release. Unfortunately, I've already thrown away my Ironhide box, so I can't tell you what the production stamp code was.

[william-james88]

I did find some new stuff today (well, new for me). Got Siege Ironhide and Sixgun. The panel on the right leg doesn't peg as is the case with everyone but it doesnt flap around at all and aesthetically it doesnt really change anything. I am quite happy about that since I expected so much worse after reading the comments.

The side leg flaps on my Ironhide don't peg in too well, but it doesn't really matter, as they stay flush against the leg when in robot mode. The only real issue is that they fall off when you handle the figure, especially when transforming. Even if you're being as careful as possible, those panels will fall off at the slightest provocation. I wonder if we'll see a running change in the mold by the time Ratchet is released this fall.

Woah, wait a second, mine doesnt do that at all. It is very tight to the point where I was sure it was pinned.

I've heard reports both ways, that they're solidly in place, like yours, and that they're like mine, falling off at the drop of a hat. I'm not sure if it's a QC your mileage may vary sort of thing or if there was a running change and you got a later, revised release. Unfortunately, I've already thrown away my Ironhide box, so I can't tell you what the production stamp code was.

Well I have mine. If anyone has a crappy one, with the box still, let us know what the production stamp is.

[Nemesis Destron]

My Ironhide doesn't have problems with those panels being loose. They don't peg on like they should be they stay put with no flopping around when in robot mode so I'm happy with that!

[Wolfman Jake]

Well I have mine. If anyone has a crappy one, with the box still, let us know what the production stamp is.

What is your code, Will? If I see one out in the wild with your code or higher, I might take a chance and double dip to see if I get a better figure.

[Nemesis Destron]

Good luck to you Wolfman!

[Lunatic Prime]

Well I have mine. If anyone has a crappy one, with the box still, let us know what the production stamp is.

I have the same issue but I threw my packaging away just two days ago. Maybe I'll check if it's still in the paper container tomorrow.

Another thing I found just a couple of minutes ago: another hinch on Six-Gun :

IMG_20190502_220010.jpg

IMG_20190502_220041.jpg