Seibertron.com Energon Pub Forums

[Seibertron]

Up next in our all-new galleries for Transformers War for Cybertron Earthrise, is none other than the Autobots very own Maintenance 'bot Hoist. If his Generations Thrilling 30 toy was a disappointment to you, then the latest Deluxe Class version of Hoist should hit a lot of the right notes for you. Hoist features key character design elements like his "full spectrum multi-sensor", his orange wings and an arm cannon. In tow-truck mode, Hoist can even tow his fellow Autobot comrades that were damaged in battle against the Decepticons. His tow-truck accessory also doubles as a ramp accessory that connects to other bases. We even tossed in some pics of Hoist alongside his "master builder" buddy Grapple, who is also part of the Earthrise wave 1 releases.

The Transformers War for Cybertron Earthrise products have been popping up at various retail chains like Walmart, Target and Best Buy throughout the past month. Make sure to share your sightings with your fellow Seibertronians in our sightings section and sightings forums.

Special thanks to Entertainment Earth for providing this product to Seibertron.com. You can purchase Transformers products and other popular brands from EntertainmentEarth.com.

We will be posting more Earthrise galleries over the course of the next couple of weeks. Keep checking back for more! In the meantime, you can click on any of the images below to view the full gallery.

---

War for Cybertron: Earthrise Hoist (105 images) - Deluxe Class

[ZeldaTheSwordsman]

Woo!
Will comparisons to the original and the MP be forthcoming?

[Seibertron]

Woo!
Will comparisons to the original and the MP be forthcoming?

Not at this time. I'm trying to limit the amount of comparisons I do in these galleries to be more time efficient.

[Sabrblade]

has a G1 cartoon style in robot mode and a G1 toy look in vehicle mode,

Huh. I never realized this until you pointed it out.

A colorful altmode deco and a clean robot mode deco. The best of both worlds.

[aronjlove]

I'm really happy with ER Wheeljack. I just wish he had more 5mm ports. His spoiler pieces are actually 5mm and can be removed for more ports but then he doesn't have his classic look.

[o.supreme]

Just curious, was there ever a pre order listing for Skylynx on Amazon? Even if it isn't available, I just like to add them as a sort of checklist.

[TF-fan kev777]

Just curious, was there ever a pre order listing for Skylynx on Amazon? Even if it isn't available, I just like to add them as a sort of checklist.

Yes, I pre-ordered there when he was first announced, been sold out for a while.

https://www.amazon.com/gp/product/B083V ... UTF8&psc=1

[o.supreme]

That is perfect. Thank you so much. For some reason I can.never get items to show up in searches if they are currently unavailable.

[D-Maximal_Primal]

Ordered Cliffjumper tonight along with the Ghosts of Cybertron Trade from Amazon, looking forward to finally getting him in hand, he is the one i really want from the wave.

I'll see the others eventually to get, not really rushed with them at all.

Also, I really wish they had used a different Wheeljack head mold, I really don't like that one that much

[ZeldaTheSwordsman]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

[D-Maximal_Primal]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

[Tuned Agent]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

I tend to agree, the headsculpt is the weakest part of ER Wheeljack (at least looks-wise). IMO, CW Wheeljack has the best headsculpt of the Generations Wheeljacks. For all faults of that toy, the one thing it got right was the headsculpt.

[Sentinel_Primal]

I think the headsculpt is mostly fine, it just needs to be a bit bigger. Then again it could be the arms and feet being too chunky in comparison to the torso and head

[ZeldaTheSwordsman]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

I was poking at your word choice, good sir. To say you wish they had used "a different head mold" is to imply that the ER Wheeljack tooling had a variety of different Wheeljack head molds to choose from, and it generally doesn't work that way

I think the headsculpt is mostly fine, it just needs to be a bit bigger. Then again it could be the arms and feet being too chunky in comparison to the torso and head

You know, sometimes that's the price of a transforming Transformers toy. It's not like the pinheads of Classics Mirage and Hot Rod, it's well within reasonable range.

[D-Maximal_Primal]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

I tend to agree, the headsculpt is the weakest part of ER Wheeljack (at least looks-wise). IMO, CW Wheeljack has the best headsculpt of the Generations Wheeljacks. For all faults of that toy, the one thing it got right was the headsculpt.

I wonder if the balljoints are the right size to swap the heads

[carytheone]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

I tend to agree, the headsculpt is the weakest part of ER Wheeljack (at least looks-wise). IMO, CW Wheeljack has the best headsculpt of the Generations Wheeljacks. For all faults of that toy, the one thing it got right was the headsculpt.

I wonder if the balljoints are the right size to swap the heads

This got me genuinely curious. I've never considered which headsculpt I preferred. I tossed together a quick comparison with MP in there just for fun.

ER and MP's "head fins?" are a little on the "crazy/unkempt" side. I think I'd like the CW best if the fins were painted silver. As it stands I'm going with the gen figure as my preferred head sculpt/deco. I dig the clear "ears" and light piping.

[D-Maximal_Primal]

What other mold could they have used than the one that was part of the ER toy?
Did you mean design?

Just a different head mold. that one just doesn't work for me. it feels too round and soft

I tend to agree, the headsculpt is the weakest part of ER Wheeljack (at least looks-wise). IMO, CW Wheeljack has the best headsculpt of the Generations Wheeljacks. For all faults of that toy, the one thing it got right was the headsculpt.

I wonder if the balljoints are the right size to swap the heads

This got me genuinely curious. I've never considered which headsculpt I preferred. I tossed together a quick comparison with MP in there just for fun.

TheManyFacesOfWheeljack.jpg

ER and MP's "head fins?" are a little on the "crazy/unkempt" side. I think I'd like the CW best if the fins were painted silver. As it stands I'm going with the gen figure as my preferred head sculpt/deco. I dig the clear "ears" and light piping.

I agree with the Generations one having the best head sculpt. I also wish the headsculpts drifted a little closer to Alex Milne or Prime wheeljack personally

[ZeldaTheSwordsman]

Was Milne the one who started the thing of drawing G1 characters like they were Aligned characters?

[D-Maximal_Primal]

Was Milne the one who started the thing of drawing G1 characters like they were Aligned characters?

Dunno what you are talking about, but no.

He is the one who is drawing Galaxies and TF vs Terminator currently, and makes any Transformer look infinitely better than almost every other artist. His attention to detail and stylizations are awesome.

If you are referring to Ex-RiD from around 2011, that was Andrew Griffith drawing them like their FOC bodies

[Sabrblade]

If you are referring to Ex-RiD from around 2011, that was Andrew Griffith drawing them like their FOC bodies

And (unless some interview has stated otherwise to my unawares, which is entirely possible) I'd bet that that was probably per request by Hasbro since, at the time, that was when Hasbro was wanting all of its mainstream licensees to have everything tie into the Aligned continuity, but which IDW only went as far as using the WFC/FOC body designs rather than dropping their main G1 continuity altogether (which is something Hasbro did want them to do at the time, but which ultimately did not happen until the Unicron mini-series in 2018).

[Rodimus Prime]

Back to Earthrise. If you want to discuss comic art styles, please do so in the comics forum.

Do you guys favor ER over Siege at all, or do you look at them the same way? I'm asking because the more I think about it the more I'm leaning toward ER, for the simple fact that they're giving us figures which already have representation in media, mainly the G1 cartoon. Siege figures are really good too, and I got most of the line, but honestly, besides Omega, Magnus and Shockwave, none of the figures appealed to me especially, because their appearances are different. I didn't realize this until recently, because I kept looking my Siege collection, and I felt something was off. Now I know. They're still great figures and I'm glad I got them, but I'm looking forward to ER much more.

[o.supreme]

Honestly I feel that ER is part 2 of 3 of the overall WFC Trilogy. The packaging is the same as Siege, even if the gimmicks are slightly different, even some items from Siege are being re released in ER. My only complaint so far is that it feels like a relatively small line, though no doubt there is more to be revealed, though due to present circumstances, we probably don't know when these new items will be revealed.

[carytheone]

Do you guys favor ER over Siege at all, or do you look at them the same way?

Overall I think I favor Siege more. It seemed to have had more excitement or maybe it seemed to offer something new, cybertronian alt modes and no "forced line wide gimmicks". For me ER feels like a slump, like Hasbro blew their wad on Siege that they're either coasting on fumes or catching their breath. This is probably just me projecting because I filled a lot of gaps and replaced a lot of previous purchased bots during the siege.

I will say that in hindsight, I wish I would have waited for ER on a few purchases. With that said I'm starting to consider if I should also pump the brakes and wait for part 3.

Either way, ER feels less exciting and I feel less motivated to pick up any additional figures.

[ZeldaTheSwordsman]

Back to Earthrise. If you want to discuss comic art styles, please do so in the comics forum.

Do you guys favor ER over Siege at all, or do you look at them the same way? I'm asking because the more I think about it the more I'm leaning toward ER, for the simple fact that they're giving us figures which already have representation in media, mainly the G1 cartoon. Siege figures are really good too, and I got most of the line, but honestly, besides Omega, Magnus and Shockwave, none of the figures appealed to me especially, because their appearances are different. I didn't realize this until recently, because I kept looking my Siege collection, and I felt something was off. Now I know. They're still great figures and I'm glad I got them, but I'm looking forward to ER much more.

Honestly? I see the trilogy as a single unit broken up for marketing purposes, and the G1 cartoon is a heavy influence on all parts. Every non-Micromaster SIEGE figure other than Cog, Brunt, Impactor, Skytread, Lionizer, Spinister, Galaxy Upgrade Optimus, and Barricade, is based on the G1 cartoon. That's why the Seekers have faux-parts F-15 ducts and cockpits despite turning into pyramid-like alien jets (which, I might add, originate from the G1 cartoon). That's why Soundwave still has tape player details and can be fanmoded into a roughly G1 transformation even w/o add-on panels. That's why Megatron has Walther P38 hammer halves on his shoulders. That's why Astrotrain's engine mode looks like a JNR D51 and his shuttle mode looks like a NASA shuttle. That's why to varying degrees (Voyager) Optimus Prime, Ratchet and Ironhide, Prowl, Mirage, and most blatantly Sideswipe turn into suspiciously Earthlike vehicles (the others can pass as Cybertronian, especially Optimus, but Sideswipe is blatantly an Earth car wearing "I'm totes an alien car UwU" stickers). Springer and Skyfire are how they looked in the cartoon (including Springer having a more distinct car mode thanks to the fenders moving past the hood), and Impactor matches the comics fairly well.

I look at the SIEGE versions of Optimus and the Seekers as WFC's equivalent of the Cybertron Mode figures from Animated - although the effect is lesser because of WFC duplicating the cartoon's "Alien altmode, Earth robot mode" thing.

With the exception of Megatron (for various reasons) and Arcee (Idiotic attempt to downscale the MP, instead of going with the proven techniques of the T30 toy), I'm largely looking forward to what Earthrise is adding: Optimus' Earth mode (complete with trailer, the Main 3 Seekers' Earth modes and the Coneheads, Scorponok, Grapple and Inferno, Astrotrain in a box stores will stock, Hoist and Trailbreaker, Cliffjumper (Quite distinct from Bumblebee, too), Snapdragon, Scorponok, Fast-Track, Sunstreaker, and so on... Quite a lot to enjoy, frankly.

[o.supreme]

Doing a rough comparison:

Siege Battlemasters (purchased all)
ER battlemasters (plan to purchase all even though only 3 have been announced)

Siege Micromasters (none)
ER Micromasters (dont plan on purchasing any)

Siege Deluxes (including Selects): Purchased 7
ER Purchased 1, plan to purchase 3 more

Siege Voyagers (none)
ER Voyagers (plan to purchase none)

Siege Leaders 1
ER Leaders 1 (plan to purchase 1 other, and any more revealed)

Siege CC (purchased)
ER CC (plan to purchase)

Siege Titan (Purchased)
ER Titan (plan to purchase)

I think the biggest difference is the smallest price point figures, even though many were repaints, we got at least 15 or so. With ER, the smallest Price Point only has 3 revealed