The Energon Pub

by **sprockitz** » Thu Sep 13, 2018 11:25 am

Psychout wrote:Use manual CR for the moment, its how us oldies used to play.

this doesn't work either.

News Credits: 42 · by **Psychout** » Thu Sep 13, 2018 11:31 am

sprockitz wrote:
Psychout wrote:Use manual CR for the moment, its how us oldies used to play.

this doesn't work either.

(╯°□°）╯︵ ┻━┻

Ironbot Challenge it is then...

by **sumowrestler** » Thu Sep 13, 2018 12:03 pm

I manually put mine in the cr chamber and was charged for it. However, they were still stasis locked. It might be time for arena again if anyone has functioning mechs.

by **sprockitz** » Thu Sep 13, 2018 12:14 pm

Psychout wrote:Interesting twist time:

Checked my Options (from the Registry page) and my CR was now set to manual (previously Auto), and my help text was now On (previously Off).
Tried to change them and it rejected the changes.

I've been informed that I can change it by picking the opposite of what I want. I managed to switch mine from auto to manual that way, which appears to have worked.

I'm 17 minutes away from finding out if that actually affects for the mission my namesake is in (assuming 007 or odnah can actually scratch me.)

I switched mine to do the opposite as well and it had no affect...still went auto to cr and came out not being healed. looks like time to take a break until this gets fixed. :-(

News Credits: 3 · by **ctrlFrequency** » Thu Sep 13, 2018 12:27 pm

Psychout wrote:
sprockitz wrote:
Psychout wrote:Use manual CR for the moment, its how us oldies used to play.

this doesn't work either.

(╯°□°）╯︵ ┻━┻

Ironbot Challenge it is then...

Damn it. I started doing that a few hours ago

News Credits: 1 · by **Kaijubot** » Thu Sep 13, 2018 1:15 pm

I'm pretty certain I'm wrong the about Auto CR. I thought my bots hadn't been put into CR, not realising that the repairs not taking would look just the same as if they hadn't been put in at all. I blame being tired from work for that mistake.

Like Optimus_Prime007 on Facebook · by **Optimus_Prime007** » Thu Sep 13, 2018 3:13 pm

Psychout wrote:Interesting twist time:

Checked my Options (from the Registry page) and my CR was now set to manual (previously Auto), and my help text was now On (previously Off).
Tried to change them and it rejected the changes.

I've been informed that I can change it by picking the opposite of what I want. I managed to switch mine from auto to manual that way, which appears to have worked.

I'm 17 minutes away from finding out if that actually affects for the mission my namesake is in (assuming 007 or odnah can actually scratch me.)

I scratch myself, thank you. :-P

CR Chamber not working for me either.

News Credits: 1 · by **Cheetron** » Thu Sep 13, 2018 3:30 pm

I put mine into the cr chamber and refreshed the page after the hour. It was like nothing happened.

by **Agraell** » Thu Sep 13, 2018 3:36 pm

Hmm my bots seems also like they are not being repaired

News Credits: 1350 · by **ZeroWolf** » Thu Sep 13, 2018 3:50 pm

Seems like I made the right choice not to send my cons off earlier. :-?

Hopefully this is an easy fix.

News Credits: 226 · by **Burn** » Thu Sep 13, 2018 3:54 pm

Just shot Ryan an e-mail about it.

by **adamsafran** » Thu Sep 13, 2018 6:52 pm

CR doesn't seem to be working at all. Auto is not putting chars in, and manual does not appear to be healing them even when timespan 'finishes'.

News Credits: 3 · by **ctrlFrequency** » Thu Sep 13, 2018 7:20 pm

When I click on the upgrade link in a character profile I get this....

Fatal error: Call to undefined function techspecs() in /var/www/vhosts/seibertron.com/httpdocs/heavymetalwar/character-upgrade.php on line 18

News Credits: 3597 · by **Seibertron** » Thu Sep 13, 2018 8:32 pm

ctrlFrequency wrote:When I click on the upgrade link in a character profile I get this....

Fatal error: Call to undefined function techspecs() in /var/www/vhosts/seibertron.com/httpdocs/heavymetalwar/character-upgrade.php on line 18

Fixed. Thanks.

News Credits: 3597 · by **Seibertron** » Thu Sep 13, 2018 8:33 pm

adamsafran wrote:CR doesn't seem to be working at all. Auto is not putting chars in, and manual does not appear to be healing them even when timespan 'finishes'.

Can you guys let me know if CR is working for you now?

I think I fixed it, but not 100% certain.

by **White_Noise** » Thu Sep 13, 2018 8:38 pm

Hello,

I just put two cons, Spawncamp and Crumplerear, into two seperate missions, and I had an error message come up to say that they did not join the missions. However, on registry screen, they are shown to be in missions, locked by timer.

In the missions not joined, it shows an additional combatant that is not present
I.e. 1/6 Decepticons when there were none, 4/6 Decepticons when there were three

Managed to get another character into the 4/6 mission (#82711) after the fact, so it looks like my team is taking up two player slots in that mission

EDIT: Mission timers have expired. No mission logs. Despite no fighting, both characters had all health removed and put into stasis lock

by **sprockitz** » Thu Sep 13, 2018 8:38 pm

Seibertron wrote:
adamsafran wrote:CR doesn't seem to be working at all. Auto is not putting chars in, and manual does not appear to be healing them even when timespan 'finishes'.

Can you guys let me know if CR is working for you now?

I think I fixed it, but not 100% certain.

still broken

by **adamsafran** » Thu Sep 13, 2018 8:47 pm

Still broken. Chars go into repairs, come out with same damage.

by **White_Noise** » Thu Sep 13, 2018 8:50 pm

Seibertron wrote:
adamsafran wrote:CR doesn't seem to be working at all. Auto is not putting chars in, and manual does not appear to be healing them even when timespan 'finishes'.

Can you guys let me know if CR is working for you now?

I think I fixed it, but not 100% certain.

That's a Negative from me for manual CR input

News Credits: 3597 · by **Seibertron** » Thu Sep 13, 2018 9:10 pm

Thank you for letting me know about the problems.

Any chance some of you can provide me with current links to help point me in the right direction? Screenshots are helpful, but it's best with links to help me figure out which files are having problems.

by **Phasewing** » Thu Sep 13, 2018 9:23 pm

https://www.seibertron.com/heavymetalwar/cr.php

We can send our toons to the CR, pay energon to do so, but they do not come out healed like usual.

Dunno where else aside from the CR page where you could look, Ryan.

https://www.seibertron.com/heavymetalwa ... ptions.php

Maybe here too, it goes back to manual/manual/yes when I set everything to auto/auto/no... but not sure.

by **sumowrestler** » Fri Sep 14, 2018 12:05 am

hmw_character_doing a INNER JOIN hmw_characters c USING (character_id) SET c.health = 100, a.is_active = 0, a.doing = NULL, a.doing_ts = NULL WHERE a.doing_ts < 1536901218 AND a.doing = 2 AND a.user_id = 10671

I got this message on the top of my page right above the banner when I activated two mechs. One is fully healed due to being in the arena and the other with 5% health at best. The word UPDATE was at the beginning of the message but it didn't copy. This was on my registry page.

Ok, another issue is the arena page. I just clicked on it to put the two mechs 8n. My barely functioning, 4% health, had failed medic check under doing column. Under the heads up display,

Transformer
Level
Health
Doing

CR option
Sea Creature Long Legs [TAG] 0 100% Arena - Waiting Stop
Rainbow Bird Solar Wing 2 4% Failed medical check

HEAD-UP DISPLAY - YOUR ACTIVE CHARACTERS
percentage = 1heal_time =
cr_percentage =
Long Legs [TAG] Sea Creature

Level 0 217,011xp
percentage = 0.04heal_time =
cr_percentage =
Solar Wing Rainbow Bird

Level 2 24,725xp

No clue what that is all about.

by **Phasewing** » Fri Sep 14, 2018 12:08 am

I get this at the top of the site on the registry page now:

UPDATE hmw_character_doing a INNER JOIN hmw_characters c USING (character_id) SET c.health = 100, a.is_active = 0, a.doing = NULL, a.doing_ts = NULL WHERE a.doing_ts < 1536901308 AND a.doing = 2 AND a.user_id = 3864

Also... on the registry page as well, the healthbars are thread-thin. Team view page also looks... smooshed?

by **Agraell** » Fri Sep 14, 2018 12:16 am

Phasewing wrote:I get this at the top of the site on the registry page now:

UPDATE hmw_character_doing a INNER JOIN hmw_characters c USING (character_id) SET c.health = 100, a.is_active = 0, a.doing = NULL, a.doing_ts = NULL WHERE a.doing_ts < 1536901308 AND a.doing = 2 AND a.user_id = 3864

Also... on the registry page as well, the healthbars are thread-thin. Team view page also looks... smooshed?

Aww that is an SQL query that updates the character and character action table when an action (healing) is done. I guess they are trying to fix it.

by **Phasewing** » Fri Sep 14, 2018 12:24 am

Agraell wrote:
Phasewing wrote:I get this at the top of the site on the registry page now:

UPDATE hmw_character_doing a INNER JOIN hmw_characters c USING (character_id) SET c.health = 100, a.is_active = 0, a.doing = NULL, a.doing_ts = NULL WHERE a.doing_ts < 1536901308 AND a.doing = 2 AND a.user_id = 3864

Also... on the registry page as well, the healthbars are thread-thin. Team view page also looks... smooshed?

Aww that is an SQL query that updates the character and character action table when an action (healing) is done. I guess they are trying to fix it.

I see... and yeah, figured, since registry page went crazy for a few minutes.