The Energon Pub

News Credits: 332 · Sun Jan 03, 2016 12:34 am

I went in on the set, but I renew in March so if the club charges me a full renewal rate instead of until December, I'm dropping the whole thing.

News Credits: 462 · Sun Jan 03, 2016 10:59 pm

shajaki wrote:As for Bludgeon... I'm surprised to hear all the discourse. With the popularity of his "shell" we're actually pretty lucky to get a modern taste of his proper bot mode. Besides, putting a samurai skull head on that body would look out of place, whereas the ROTF body is designed entirely around that motif. I look forward to standing the two Bludgeon's right next each other.

I'd just really rather have another, bigger version of Thunderwing rather than another, less exciting-looking Bludgeon of the same size as the previous, good-sized one.

A Thunderwing from the Cyclonus mold would both be a better size than the old small Deluxe one and would work for both is inner robot mode (Cyclonus) and his Pretender shell (Galvatronus).

News Credits: 3 · Mon Jan 04, 2016 8:40 pm

I kind of like the way Bludgeon is. He can be my pre-Stormbringer Bludgeon, while ROTF/Headrobots Bludgeon can be post-Stormbringer.

Plus extending out the chest-plate in vehicle mode you can kinda simulate the "wings" he was flying with in Spotlight: Thundercracker too.

Apart from Spinister (have the Botcon one) I don't have any of the limb bots, so I'm pretty happy to pad out my 'Con army, and being a clmbiner to boot is pretty sweet as I don't have much space to display.

News Credits: 7 · Tue Jan 05, 2016 12:11 am

Rated X wrote:Thunder mayhem however, just has a stupid looking thunderwing head that nobody wanted.

I think it'll fit in with the other torsos that have Optimus Prime, Galvatron, and Sky Lynx heads. :-D

News Credits: 1646 · Mon Jan 11, 2016 1:37 am

Nemesis Primal wrote:
Rated X wrote:Thunder mayhem however, just has a stupid looking thunderwing head that nobody wanted.

I think it'll fit in with the other torsos that have Optimus Prime, Galvatron, and Sky Lynx heads.

Random extra heads :lol:

Thu Jan 14, 2016 10:18 am

I figured out why we're getting a Bludgeon instead of a Thunderwing: To avoid exclusive overlap. Since Sea Clamp is using the Scattershot mold, they can't use Silverbolt or any of his derivatives for the subscription service lest people complain about them using the mold for two different things. Thus they made Bludgeon out of Onslaught because they didn't want to use the same general mold for two different things, and Bludgeon is the only non-Thunderwing character who both palled around with the mayhems and is big enough to be the torso. Voila! Everything adds up!

Sat Jan 16, 2016 11:59 am

Ok... So... TFSS 5.0.

We know it's not all CW molds this time.
We know it's the last time the club will use CW molds.

PLEASE make sure we get CW Quake and Crankcase. That's all I care about. I realize it's too late at this point to change anything, but those two need to be made so that the 4.0 set gets their trios complete.

News Credits: 2 · Thu Jan 28, 2016 5:58 am

In regards to G2 Starscream, can anyone weigh in on any loose parts on the figure? I came across 2 different sellers on-line and both are claiming this factor while considering how long ago the figure was released. Thanks all for your help! ;)^

News Credits: 174 · Mon Feb 08, 2016 10:38 pm

Fellow Seibertronians, exciting news has been brought to us courtesy of Survivefan23. John DeLuna has posted images to his twitter account of two of the new TFSS 5.0 figures: Double Pretender Optimus Prime with Hi-Q and Paradron Medic with Quickslinger. These have been mirrored below for your viewing pleasure. So what do you think of these figures? Are these enough to get you to sign up for the TFSS 5.0? Let us know in the comments below.

News Credits: 174 · Mon Feb 08, 2016 10:40 pm

Trukk and Munky :lol:

News Credits: 41 · Mon Feb 08, 2016 10:44 pm

That little Prime is pretty Great!

News Credits: 2 · Mon Feb 08, 2016 10:52 pm

Hellscream9999 wrote:Trukk and Munky

Trukk IN Munky.

News Credits: 174 · Mon Feb 08, 2016 11:04 pm

Twitchythe3rd wrote:
Hellscream9999 wrote:Trukk and Munky

Trukk IN Munky.

That's pretty meta :lol:

News Credits: 1646 · Mon Feb 08, 2016 11:05 pm

Prime makes no sense whatsoever.....but I like it. When can we get retail pretenders back?? I want that stupid gorilla

News Credits: 174 · Mon Feb 08, 2016 11:09 pm

D-Maximus_Prime wrote:Prime makes no sense whatsoever.....but I like it. When can we get retail pretenders back?? I want that stupid gorilla

Probably never

News Credits: 251 · Mon Feb 08, 2016 11:10 pm

Optimus looks to be based on the Generation 2 Gobot mold with Armada Optimus's head. Not sure if the Pretender shell is supposed to homage anything in particular (though I'm getting Universe (2003) Optimus Primal/Robots in Disguise (2001) Optimus Prime vibes from him).

Wonder who Quickslinger is based on?

Mon Feb 08, 2016 11:16 pm

Mindmaster wrote:Optimus looks to be based on the Generation 2 Gobot mold with Armada Optimus's head. Not sure if the Pretender shell is supposed to homage anything in particular (though I'm getting Universe (2003) Optimus Primal/Robots in Disguise (2001) Optimus Prime vibes from him).

Wonder who Quickslinger is based on?

Cybertron Quickslinger. She had no official toy until now.

News Credits: 2 · Mon Feb 08, 2016 11:16 pm

Twitchythe3rd wrote:
Hellscream9999 wrote:Trukk and Munky

Trukk IN Munky.

Kinky.

News Credits: 251 · Mon Feb 08, 2016 11:20 pm

Railbomb wrote:
Mindmaster wrote:Optimus looks to be based on the Generation 2 Gobot mold with Armada Optimus's head. Not sure if the Pretender shell is supposed to homage anything in particular (though I'm getting Universe (2003) Optimus Primal/Robots in Disguise (2001) Optimus Prime vibes from him).

Wonder who Quickslinger is based on?

Cybertron Quickslinger. She had no official toy until now.

*skims over TFWiki article*

Now I'm wishing it had been Legends-class Groove...

News Credits: 388 · Mon Feb 08, 2016 11:33 pm

Looks promising so far. The Paradron Medic had to happen at some point. Just a few paint and plastic changes to Arcee is all it takes, no remolding.

I do wonder though......if this is TFSS 5.0...will the TFCC be releasing it? I thought their license wasn't going to be renewed, due to their announcement stating that all memberships would cease to be effective at the end of the year. Or did I read that wrong?

News Credits: 174 · Mon Feb 08, 2016 11:39 pm

Bounti76 wrote:Looks promising so far. The Paradron Medic had to happen at some point. Just a few paint and plastic changes to Arcee is all it takes, no remolding.

I do wonder though......if this is TFSS 5.0...will the TFCC be releasing it? I thought their license wasn't going to be renewed, due to their announcement stating that all memberships would cease to be effective at the end of the year. Or did I read that wrong?

As far as we know, it was always due to continue through 5.0. As for botcon 2017... not sure about that

News Credits: 2 · Mon Feb 08, 2016 11:41 pm

Medic is a solid buy but that's all! >:oP

News Credits: 388 · Mon Feb 08, 2016 11:54 pm

Hellscream9999 wrote:
Bounti76 wrote:Looks promising so far. The Paradron Medic had to happen at some point. Just a few paint and plastic changes to Arcee is all it takes, no remolding.

I do wonder though......if this is TFSS 5.0...will the TFCC be releasing it? I thought their license wasn't going to be renewed, due to their announcement stating that all memberships would cease to be effective at the end of the year. Or did I read that wrong?

As far as we know, it was always due to continue through 5.0. As for botcon 2017... not sure about that

Well that's what I'm not sure about. TFSS 4.0 is coming out this year (likely after or around Botcon in 2 months), which means 5.0 is next year, 2017. So if they've lost the license, how is 5.0 going to happen? Or does this signal that they'll still be putting Botcon on and just requiring members to sign up every year?

News Credits: 47 · Mon Feb 08, 2016 11:57 pm

Also another that I discovered.

News Credits: 251 · Mon Feb 08, 2016 11:58 pm

Bounti76 wrote:
Hellscream9999 wrote:
Bounti76 wrote:Looks promising so far. The Paradron Medic had to happen at some point. Just a few paint and plastic changes to Arcee is all it takes, no remolding.

I do wonder though......if this is TFSS 5.0...will the TFCC be releasing it? I thought their license wasn't going to be renewed, due to their announcement stating that all memberships would cease to be effective at the end of the year. Or did I read that wrong?

As far as we know, it was always due to continue through 5.0. As for botcon 2017... not sure about that

Well that's what I'm not sure about. TFSS 4.0 is coming out this year (likely after or around Botcon in 2 months), which means 5.0 is next year, 2017. So if they've lost the license, how is 5.0 going to happen? Or does this signal that they'll still be putting Botcon on and just requiring members to sign up every year?

I'm pretty sure it's just them changing up the membership registration dates, and they all now renew/expire at the end of the year.

I know there was a Facebook post from Pete waaaaay back when this was a big deal, and one of the comments was "Say it ain't so!". I think what's happebing is that Pete is stepping down and someone else is taking over FunPub.