Seibertron.com Energon Pub Forums

[-Kanrabat-]

To be honest, the real reasons are budget and space limitations. I can't buy everything, I cant display everything, so I must buy only what really, REALLY interest me.

I bought a town house ... and it's still not enough. So that, combined with lack of money, has me scaling back on what I buy.

But stuff like this? I get rid of the old stuff ... like movie figures. I find the room. I find the money.

btw, your sig is too big. I could fix it for you but you wouldn't like my fix. One day I'll get you to read the guidelines.

Sigh... Where are the guidelines? What IS the maximum size of the picture? It would be nice if it would be clearly stated in the user control panel, like when the system refuse to update your sig when it have more than 5 links.

[1984forever]

I will definitely get the Combaticons if that's what Hasbro is going to repaint the Protectobots into. But only if they also repaint Skydive into Blast-Off.

[Evil Eye]

Does anyone else suspect Frenzy and Rumble repaints from CW Groove?





I imagine they'd have added chaingun accessories (one each with a 5mm peg and one each with a 5mm hole) to connect to their sides in motorcycle mode and somehow to their arms as pile-drivers in robot mode.

Also, I wonder if Groove is primarily intended to be a gun, not a chest-plate, for Defensor.

I can see that- wait, is that Solid Snake and Big Boss?

[Burn]

Sigh... Where are the guidelines? What IS the maximum size of the picture? It would be nice if it would be clearly stated in the user control panel, like when the system refuse to update your sig when it have more than 5 links.

It's clearly stated in the rules and guidelines, the global announcement.

[euphoricallydead]

Don't like Longhaul's all silver robot head. would of liked the head to be black and silver.

Wasn't his head silver in the cartoon?

[Madeus Prime]

Does anyone else suspect Frenzy and Rumble repaints from CW Groove?

Ohhhh, me like the idea, they could even make those guns into combo pile-drivers.



He even has slots for them to peg on! And honestly, a new head wouldn't be needed, it'd be preferred, but not required.

Also, anybody royally pissed off about the Constructicons lack of articulation?



Would it have killed Hasbro's designers to give him frikkin' elbows?!

[Burn]

Also, anybody royally pissed off about the Constructicons lack of articulation?

Would it have killed Hasbro's designers to give him frikkin' elbows?!

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

[peaces]

a lot of sacrifices to increase their profit margin

[Evil Eye]

It looks like it should be relatively simple for some generous soul on Shapeways to make elbows for those lacking them. Scrapper just seems to use mushroom pegs after all.

[Arctorro]

Also, anybody royally pissed off about the Constructicons lack of articulation?

Would it have killed Hasbro's designers to give him frikkin' elbows?!

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

They could've made his arms collapse so the elbows were out of the way for leg mode. After seeing Scrapper and Long Haul I'm passing on these. TFC Herc is my Devastator and these would've primarily been in bot mode and I cannot accept Voyager size figures with no elbows.

[Madeus Prime]

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

Yeah, but considering the leaps we've had in toy engineering in the Generations line, I think they still could've done a LOT better. Sorry, but if I could I'd still buy all those 3d Party Dev's over this guy, simply for the elbows and design.

It looks like it should be relatively simple for some generous soul on Shapeways to make elbows for those lacking them. Scrapper just seems to use mushroom pegs after all.

Only way I'll buy this guy, and they better be ninety-degree bends.

[Noideaforaname]

It's kinda sad that one of these figures is ~3 times the size of the other.

[megatronus]

I foresee a 3rd Party making an arm replacement kit. I'd pay for that.

[fenrir72]

Also, anybody royally pissed off about the Constructicons lack of articulation?

Would it have killed Hasbro's designers to give him frikkin' elbows?!

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

They could've made his arms collapse so the elbows were out of the way for leg mode. After seeing Scrapper and Long Haul I'm passing on these. TFC Herc is my Devastator and these would've primarily been in bot mode and I cannot accept Voyager size figures with no elbows.

$150 (?) vs $ 300?

[Optimum Supreme]

Good news: Combiner Wars just hit my area!

Bad news: I have no money.

Heh, same here.

Wave one just wiped out my wallet. It was a Valentines Day miracle!



Anyway, Hotspot's vehicle mode clearly shows he's a pretool for Onslaught, no doubt about it.

[Ultramag68]

The Combiner Wars Defensor is awesome. I haven't seen really good combiners in a long time. It makes the original Defensor Look lame. I can't wait to get one and one of Superion. A few years ago Power Combiners hit the market. They are not even close to the style and quality of Combiner wars. I really want to see if Hasbro comes up with a Computron.

[Burn]

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

Yeah, but considering the leaps we've had in toy engineering in the Generations line, I think they still could've done a LOT better. Sorry, but if I could I'd still buy all those 3d Party Dev's over this guy, simply for the elbows and design.

You'd be willing to pay twice the price just for elbows?

Seriously think about it. 3P stuff is aimed at collectors, this is going to be a general release, they need to make it semi-affordable.

And for all we know there could have been other reasons as to why no elbows. They may not have had the time to work out how to incorporate them into the design process before they had to go into production. We don't know what other reasons there may have been.

[Jelze Bunnycat]

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

Yeah, but considering the leaps we've had in toy engineering in the Generations line, I think they still could've done a LOT better. Sorry, but if I could I'd still buy all those 3d Party Dev's over this guy, simply for the elbows and design.

You'd be willing to pay twice the price just for elbows?

Seriously think about it. 3P stuff is aimed at collectors, this is going to be a general release, they need to make it semi-affordable.

And for all we know there could have been other reasons as to why no elbows. They may not have had the time to work out how to incorporate them into the design process before they had to go into production. We don't know what other reasons there may have been.

I still reckon cost and stability. With ^normal arms" I can easily see Scrapper do as well as anybody doing a handstand while supporting 1,000 lbs. on his legs.

[megatronus]

Would it have killed the designers? No. Would it have made Devestator unstable? There's a good chance ... considering the arms are used as heels.

Like I said, when it came to designing their primary goal would have been Devestator. The individual robots would have been secondary, hence so many sacrifices for the greater good.

Yeah, but considering the leaps we've had in toy engineering in the Generations line, I think they still could've done a LOT better. Sorry, but if I could I'd still buy all those 3d Party Dev's over this guy, simply for the elbows and design.

You'd be willing to pay twice the price just for elbows?

Seriously think about it. 3P stuff is aimed at collectors, this is going to be a general release, they need to make it semi-affordable.

And for all we know there could have been other reasons as to why no elbows. They may not have had the time to work out how to incorporate them into the design process before they had to go into production. We don't know what other reasons there may have been.

I would accept "cost" or "stability" reasons for lack of elbows way, way before I would ever accept a "they didn't have time to figure out how to do it the right way" type of excuse.

As I've said - it's a bummer that that's the way it has to be, but it does look like they designed these CW Constructions with Devastator in mind. And he is 18 inches tall, mind you.

[peaces]

i dig that rook has a g1 ratchet feel.

[homicide]

Is anyone else hating this Cyclonus's head sculpt?

[megatronus]

Is anyone else hating this Cyclonus's head sculpt?

I don't hate it... but it doesn't scream 'Cyclonus' to me, either.

[SW's SilverHammer]

Is anyone else hating this Cyclonus's head sculpt?

I don't hate it... but it doesn't scream 'Cyclonus' to me, either.

I don't know why but the figure reminds me of the pre production art of Cyclonus, minus the Easter colors.

[Tyrannacon]

Does anyone know if the dock strike is hampering distribution of Combiner Wars stuff?

[Cobotron]

Does anyone know if the dock strike is hampering distribution of Combiner Wars stuff?

It sure seems like it. I'd say yes.