The Energon Pub

[Agamemnon]

Wasn't the Junkion set a Platinum set?

I can confirm that the simple Brawl mod swapping his legs at the hip ball joint does not hinder any other mode. The only glaring weakness is the aforementioned bright white numbers on his crotch, which would likely be easily fixed with a sharpie.

I got Blades on the back of Defensor, in a very precarious position. I'll try to take some pics here and post them in a bit.

And you all are crazy. Alpha Bravo (and by extension Blades and Vortex, though AB is the best deco) is the best CW figure! And this isn't just me kissing up to Va'al again. I do like that mold the best, though I have to say that I like a great many of the molds used in this line. I have not been this happy since the first release of Classics all those many years ago.

[Cobotron]

Silly Cobotron. The obvious name for a Junkion combiner is OBSOLETOR.

... and one of the Junkions WAS Junk Heap, right?

Unwanticus?
Disposilator?
Refuse Maximus?
Garbatron?

[no-one]

Sanfordicus maxSonimus?

Dangit, now I have to apply for a username change.

How about Junkintrunkticus?

[MemphisR56]

Consider the following:

Hasbro throws a curve ball and it is literally planet junk.

It ends up being a primus redecco with a beard in red brown tan and gold.

[Hellscream9999]

Consider the following:

Hasbro throws a curve ball and it is literally planet junk.

It ends up being a primus redecco with a beard in red brown tan and gold.

So basically primus with cobo's avatar taped to his face

[william-james88]

Dont know, when I think of a group of 5 combining as garbage the best name I can think of is Maroon Fivicus!

Also, for all we know a set called planet junk could just be a set containing a rerelease of Armada Sideswipe, Energon Hotshot, Legion movie Jazz, Voyager Animated Megatron and Prime Airachnid.

[Cobotron]

Consider the following:

Hasbro throws a curve ball and it is literally planet junk.

It ends up being a primus redecco with a beard in red brown tan and gold.

It's just crazy enough to work!

So basically primus with cobo's avatar taped to his face

I'm not sure how to take that.



EDIT to say: at everything Will just said!

[Hellscream9999]

Consider the following:

Hasbro throws a curve ball and it is literally planet junk.

It ends up being a primus redecco with a beard in red brown tan and gold.

It's just crazy enough to work!

So basically primus with cobo's avatar taped to his face

I'm not sure how to take that.



EDIT to say: at everything will just said!

What can I say, he threw that out there, and your comment was right above it, it was like destiny or something


Maybe that should be your homework over christmas, print out a color pic of your avatar, tape to primus' face, take a pic of it and use it in your sig

[no-one]

Dont know, when I think of a group of 5 combining as garbage the best name I can think of is Maroon Fivicus!

Also, for all we know a set called planet junk could just be a set containing a rerelease of Armada Sideswipe, Energon Hotshot, Legion movie Jazz, Voyager Animated Megatron and Prime Airachnid.

Hahahaha

Man, starting to get rough in here.

[Hellscream9999]

Dont know, when I think of a group of 5 combining as garbage the best name I can think of is Maroon Fivicus!

Also, for all we know a set called planet junk could just be a set containing a rerelease of Armada Sideswipe, Energon Hotshot, Legion movie Jazz, Voyager Animated Megatron and Prime Airachnid.

Hahahaha

Man, starting to get rough in here.

If hasbro did that, it would have to be accompanied with some severe tongue-in-cheek explanation, lest we think they truly have no idea what anyone wants. Maybe it'd be a freebie if you order $50 on hts on April 1st

At the very least, I'd have something to take my pent up frustration out on

[steals_your_goats]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

[Hellscream9999]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well anyone/anything, maybe a mech utilizing the skylynx mold, something they put together themselves, rook has that multitool thing, and the ability to stick stuff into his hand-cannon-ports, seems very junkion to me, and maybe offroad, he has clearance in all mode for a great beard

[no-one]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well if it's junk we're talking a out then the MM torso amiright?

Non clue on the torso actually.

Limbs: Rook, one of the aerobots (probably AB), First Aid, Groove.

[Jelze Bunnycat]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well, we have a non-motorcycle Junkion thanks to e-Hobby: Detritus, who was a redeco of G1 Hound. And Hound appears in CW as a retool of Swindle. Also, if an Afterburner will be made from Groove, maybe we can have Nancy

[Stuartmaximus]

well here's another what if! what if we get a new Primus &/or Unicron........in the Titan Wars? granted far fetched & pure speculative! but we are getting Fort Max.....& the possibility of Trypticon! so god alone knows what we may or may not get....further down the line.....in the Titan Wars.

[Hellscream9999]

well here's another what if! what if we get a new Primus &/or Unicron........in the Titan Wars? granted far fetched & pure speculative! but we are getting Fort Max.....& the possibility of Trypticon! so god alone knows what we may or may not get....further down the line.....in the Titan Wars.

They would probably follow the trend of being cheap-feeling, unpainted, and nearly completely hollowed-out, and I want no part of that

[Hellscream9999]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well if it's junk we're talking about then the MM torso amiright?

THIS

[steals_your_goats]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well if it's junk we're talking about then the MM torso amiright?

THIS

I have to admit, this was the response I was hoping for I'm liking all of these ideas, too bad it's not going to happen.

[Hellscream9999]

So let's play with this junk combiner for a minute, what molds would it consist of? I highly doubt they would use 4 groove molds. Maybe 1 or 2 but not 4. Also what would the torso be?

Well if it's junk we're talking about then the MM torso amiright?

THIS

I have to admit, this was the response I was hoping for I'm liking all of these ideas, too bad it's not going to happen.

Well they could, the molds, exist, we just need to get hasbro to know they can/should flex their creativity a little more than everything = G1, look at what funpub and TT are doing, they're doing they're own thing with these molds and we love 'em, hasbro just needs to realize we want this sort of stuff

[Stuartmaximus]

well here's another what if! what if we get a new Primus &/or Unicron........in the Titan Wars? granted far fetched & pure speculative! but we are getting Fort Max.....& the possibility of Trypticon! so god alone knows what we may or may not get....further down the line.....in the Titan Wars.

They would probably follow the trend of being cheap-feeling, unpainted, and nearly completely hollowed-out, and I want no part of that

well i never said that it's gonna happen! it's purely hypothetical! so there maybe nothing to not be part of anyway.


but i would be intrigued to see what they would come up with, if it were ever to happen.

[Cobotron]

If it's Junk we're talking, than the torso has to be Scattershot.

[Stuartmaximus]

If it's Junk we're talking, than the torso has to be Scattershot.

lol

btw i see that thing disappeared quick! & it's not even available in the UK yet! hopefully they'll skip it.....the same as they did with Wave 2

[william-james88]

If it's Junk we're talking, than the torso has to be Scattershot.

And the limbs would all be breakdown.

[Cobotron]

If it's Junk we're talking, than the torso has to be Scattershot.

And the limbs would all be breakdownDead End.

But really, I have the whole thing figured out.

Torso - A dirty old sock
L arm - Banana peel
R arm - greasy french fry box
L leg - Empty soda can
R leg - moldy potato
Legends friend - a dead mouse

[Hellscream9999]

If it's Junk we're talking, than the torso has to be Scattershot.

Pfft, please, at least Scattershot has 3 excellent/solid modes, we just don't like him because it's insulting to our wallets and nostalgia