The Energon Pub

[D-Maximal_Primal]

Strange issue here. When I get mine I can look at it and see if I can help.

And I guess we can all say you got a Swindle with a crotch too big to button up his own pants! Sorry, had to say it

ha ha

Now come on, you have to admit that was a wee bit funny, even for the struggles of Screamer unlike Swindle's crotch piece apparently

[Hellscream9999]

Strange issue here. When I get mine I can look at it and see if I can help.

And I guess we can all say you got a Swindle with a crotch too big to button up his own pants! Sorry, had to say it

ha ha

Now come on, you have to admit that was a wee bit funny, even for the struggles of Screamer unlike Swindle's crotch piece apparently

Eh, maybe if the one figure of the wave I was looking forward too didn't suck... (still looking at you too Brawl)

Seriously, this always f^%king happens to me, I f#$king hate it

[D-Maximal_Primal]

Strange issue here. When I get mine I can look at it and see if I can help.

And I guess we can all say you got a Swindle with a crotch too big to button up his own pants! Sorry, had to say it

ha ha

Now come on, you have to admit that was a wee bit funny, even for the struggles of Screamer unlike Swindle's crotch piece apparently

Eh, maybe if the one figure of the wave I was looking forward too didn't suck... (still looking at you too Brawl)

Seriously, this always f^%king happens to me, I f#$king hate it

It will all be alright Screamer. Eventually the QC bug will move on to someone else, or designs will actually improve to better the figures themselves

[Bradimus]

That's actually not too much of a problem for me at this point, but I am well aware of that fix and will use use it as soon as necessary, but the pins in his shoulders are really loose...

And at this point, swindle has the biggest problem of them all with his leg shells not lining up with anything, yielding a vehicle mode that can't be properly formed and an unstable leg mode, and for the life of me, I cannot figure out whats causing this to happen

That is some of the worst luck I've ever seen. Maybe the good thoughts I'm sending your way will help?

Brawl; is... complicated; the waist is pretty tight, but the shoulders aren't, not too bad, but still an egregious f#$k up on the designers' part

You did see the post way back about Brawl being miss-assembled, right?

I'm going to be a nitpicker and point out that the toy is not misassembled until you perform that mod.

By that definition Skids' thighs were properly assembled on the wrong legs in the factory and miss-assembling them at home fixed the problem.

[Hellscream9999]

Brawl; is... complicated; the waist is pretty tight, but the shoulders aren't, not too bad, but still an egregious f#$k up on the designers' part

You did see the post way back about Brawl being miss-assembled, right?

I'm going to be a nitpicker and point out that the toy is not misassembled until you perform that mod.

By that definition Skids' thighs were properly assembled on the wrong legs in the factory and miss-assembling them at home fixed the problem.

oh ho, look at you, you would do well in Rook's freedom battalion

And thanks for the sympathies, it seems that between my swindle, brawls issues, and skylynx's questionable torso joint stability, onslaught is the only new figure that hasn't let me down yet - by virtue of my not having him

[King Kuuga]

Brawl; is... complicated; the waist is pretty tight, but the shoulders aren't, not too bad, but still an egregious f#$k up on the designers' part

You did see the post way back about Brawl being miss-assembled, right?

I'm going to be a nitpicker and point out that the toy is not misassembled until you perform that mod.

By that definition Skids' thighs were properly assembled on the wrong legs in the factory and miss-assembling them at home fixed the problem.

Um.... no? The molded detail, paint apps, and a hasbro rep all confirm that the Brawl mold is assembled correctly. If you perform the mod, his unit number tampograph ends up on his crotch, he has paint where the sun don't shine, and for bonus points, he holds together WORSE than the default configuration (on mine at least). Whether you like it or not, Brawl was not misassembled in package.

[Mr Skram]

Brawl; is... complicated; the waist is pretty tight, but the shoulders aren't, not too bad, but still an egregious f#$k up on the designers' part

You did see the post way back about Brawl being miss-assembled, right?

I'm going to be a nitpicker and point out that the toy is not misassembled until you perform that mod.

By that definition Skids' thighs were properly assembled on the wrong legs in the factory and miss-assembling them at home fixed the problem.

Um.... no? The molded detail, paint apps, and a hasbro rep all confirm that the Brawl mold is assembled correctly. If you perform the mod, his unit number tampograph ends up on his crotch, he has paint where the sun don't shine, and for bonus points, he holds together WORSE than the default configuration (on mine at least). Whether you like it or not, Brawl was not misassembled in package.

Yeah, my Brawl snaps together nice and tight out of the package, it's just an unfortunate design that makes him look flimsy.

[Hellscream9999]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

[Mr Skram]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

Yeah, I didn't really understand that. Noticed the gray handles as I was unpackaging them. Like, what? Why?

[Hellscream9999]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

Yeah, I didn't really understand that. Noticed the gray handles as I was unpackaging them. Like, what? Why?

Especially on swindle, he has next to no paint apps, it's so fugly

[Mr Skram]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

Yeah, I didn't really understand that. Noticed the gray handles as I was unpackaging them. Like, what? Why?

Especially on swindle, he has next to no paint apps, it's so fugly

He has all that molded detail and nothing to make it pop. Kinda makes him look wrinkly from a distance. Not sure why a jeep needs that amount of detail to begin with, but if they're gonna bother with it at least try to show it off. I still like him though, but I know he's a bit of a sore spot for you with the strange QC issues you encountered.

[Hellscream9999]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

Yeah, I didn't really understand that. Noticed the gray handles as I was unpackaging them. Like, what? Why?

Especially on swindle, he has next to no paint apps, it's so fugly

He has all that molded detail and nothing to make it pop. Kinda makes him look wrinkly from a distance. Not sure why a jeep needs that amount of detail to begin with, but if they're gonna bother with it at least try to show it off. I still like him though, but I know he's a bit of a sore spot for you with the strange QC issues you encountered.

Yeah, I don't get it, but I noticed Ryan's kinda has it going on a little in the galleries

[Stuartmaximus]

oh one question....has anyone got CW Scattershot? & can you still form his alt mode laser canon?

9k=(1).jpg (7.53 KiB) Viewed 1849 times

[Hellscream9999]

oh one question....has anyone got CW Scattershot? & can you still form his alt mode laser canon?

9k=(1).jpg

You could probably pull of an approximation of it

[Mr Skram]

oh one question....has anyone got CW Scattershot? & can you still form his alt mode laser canon?

9k=(1).jpg

Just by looking at the mold I would think it's possible to pull off some sort of pseudo cannon.

[Stuartmaximus]

ok, thanks

i just haven't seen any pics of someone that's done that yet(nor in video reviews either).

[DedicatedGhostArt]

I just took a few photos of some weird and wacky configurations I came up with when messing with Dragstrip. (sorry a lot of the images are sideways lol.)

Alright so I found the little pipes that went on Cybertron Scout Class Clocker, and found that they actually fit great on Dragstrip! I am thinking of maybe getting another Dragstrip or a Mirage to customize as Clocker.









Even the limb modes look good with them!





ALSO I found out that the combiner bit and the sword can be configured into this position due to the bent handle on the sword.







Could this be what the bent handle was for?

Also I found the foot makes a pretty good stand.





Also, bonus weird monster mode.

[King Kuuga]

So is it just me, or does anyone else think its kinda stupid that hasbro painted blast-offs entire gun (and swindles too) instead of giving them some much needed paint apps

Yeah, I didn't really understand that. Noticed the gray handles as I was unpackaging them. Like, what? Why?

Especially on swindle, he has next to no paint apps, it's so fugly

I love my Swindle. Maybe he could use a few more paint apps, but honestly I don't know what or where. he's pretty good as-is.

[D-Maximal_Primal]

I think Baltmatrix made a fan mode of Scattershots cannon. I have seen it before and it was cool looking. Go look for baltmatrix's review for it

[Hellscream9999]

So I decide to get to the bottom of what's wrong with my swindle; the results weren't good or conclusive...

I shaved some plastic off of where his legs overlap his - um - crotch bulge in vehicle mode, that helps a bit, but the issue seems to be that parts unknown seem to have been miss-measured somehow.

When the windscreen is removed from the rocker arm, it sits forward of the rocker arm by a few millimeters and doesn't line up with the arms, but I can't get past the fact that his leg shells don't line up at all with his crotch bulge, and I think that's very telling of what's wrong with him.

And yet, if they were shortened to line up, the leg would be shortened to be a different length than all of the other combine limbs, so my only conclusion is that some part of the leg were discovered to be the wrong length at some point, and were hurriedly remolded with nary a thought of what the consequences could mean

[Stuartmaximus]

I think Baltmatrix made a fan mode of Scattershots cannon. I have seen it before and it was cool looking. Go look for baltmatrix's review for it

ok, thanks

ok....i watched it....& yes....he does show it in that alt mode


one thing though....i think it's pure laziness on Hasbro's part....that they didn't change Superion's head for Betatron! i can only hope that Takara does something about that.....& also with Computron(if there is a Computron?)

[william-james88]

I think Baltmatrix made a fan mode of Scattershots cannon. I have seen it before and it was cool looking. Go look for baltmatrix's review for it

ok, thanks

ok....i watched it....& yes....he does show it in that alt mode


one thing though....i think it's pure laziness on Hasbro's part....that they didn't change Superion's head for Betatron! i can only hope that Takara does something about that.....& also with Computron(if there is a Computron?)

There is a computron and they didn't change his head for that either. Just Google combiner wars computron seibertron and you will find it.

[Stuartmaximus]

I think Baltmatrix made a fan mode of Scattershots cannon. I have seen it before and it was cool looking. Go look for baltmatrix's review for it

ok, thanks

ok....i watched it....& yes....he does show it in that alt mode


one thing though....i think it's pure laziness on Hasbro's part....that they didn't change Superion's head for Betatron! i can only hope that Takara does something about that.....& also with Computron(if there is a Computron?)

There is a computron and they didn't change his head for that either. Just Google combiner wars computron seibertron and you will find it.

ah right! well hopefully a 3rd party head'll come out......so you can swap it

[Fox Thiagarajan]

Silly Springer, those Dragstrip pics are nice. Also like th custom pipes look you added. Really pops in leg mode the most IMO.

[Hellscream9999]

Fellow Seibertronians, our very own DeathReviews has posted a review of the very colorful G2 Aerialbots and Superion boxset, see what he thinks of these very '90's repaints. And don't forget to leave your thoughts on this in the comments below.

There's no escape from the 1990s! Death reviews the G2 Aerialbots/Superion box set from Combiner Wars! Get the Reaper's unique take on these day-glow repainted figures, and if you view the whole thing, you'll likely enjoy some funky 90's rappin' about them illin' Aerialbots!