The Energon Pub

[Sabrblade]

I guess this thread would be a good place to share these pics, since they feature Brave Maximus, Black Convoy, Omega Prime, and three versions of the Build Team. But it's mainly a showcase of Fortress, Grand, and Brave Maximus altogether.


Robot mode







Battleship mode









Battle Station mode









City mode

[Rodimus Prime]

Very nice! In my younger collector days 1 of my elusive goals was to get all 3 versions of Maximus, but I never got Grand Maximus. Just too expensive. I guess the TR version would be adequate, even if it was an imitation. If I did get all 3, I would have displayed them each in a different mode. Fort Max in robot, Grand Max in battleship, and Brave Max in city.

And kudos on that Laser Magnus. Another of my grails I gave up on when I decided to downscale my collection.

[Ebonsaber]

I hope nobody minds a little necroing on this thread, but I just want to point out a tiny detail that isn't in the Wiki.

Grimlock's cab is actually tooled differently in the Japanese version compared to the US version, having a bigger front window. The smaller window version is carried over to the WalMart version but I can't confirm though if it's tbe same as the Universe Scavenger version. The line art of the RiD instructions though depict the larger window version for some odd reason. I wonder why Hasbro chose to retool this part?

[Jelze Bunnycat]

I hope nobody minds a little necroing on this thread, but I just want to point out a tiny detail that isn't in the Wiki.

Grimlock's cab is actually tooled differently in the Japanese version compared to the US version, having a bigger front window. The smaller window version is carried over to the WalMart version but I can't confirm though if it's tbe same as the Universe Scavenger version. The line art of the RiD instructions though depict the larger window version for some odd reason. I wonder why Hasbro chose to retool this part?

That change is carried over onto Universe Scavenger, yes. The line art in the US instructions is copied directly from the Japanese ones, that was the norm. And my guess is to avoid breakage: the top tip of the claw bumps on that spot in the window.

[Emerje]

I hope nobody minds a little necroing on this thread, but I just want to point out a tiny detail that isn't in the Wiki.

Grimlock's cab is actually tooled differently in the Japanese version compared to the US version, having a bigger front window. The smaller window version is carried over to the WalMart version but I can't confirm though if it's tbe same as the Universe Scavenger version. The line art of the RiD instructions though depict the larger window version for some odd reason. I wonder why Hasbro chose to retool this part?

That change is carried over onto Universe Scavenger, yes. The line art in the US instructions is copied directly from the Japanese ones, that was the norm. And my guess is to avoid breakage: the top tip of the claw bumps on that spot in the window.

I doubt breakage is the issue since it's all painted clear plastic. I don't know what the inside looks like on the Japanese ones but I'm guessing there's something structural that they're trying to hide on the inside to keep the claw from breaking off. The "frame" of the window is still there, it's just the outline of the window itself that was lowered. It's very strange but probably for a good reason.

Emerje

[D-Maximal_Primal]

In honor of the Haslab announcement, I lucked into securing the holy pair themselves

[Sabrblade]

I've been theorizing about something from the RID 2001 toyline lately.

As we all know, the Hasbro line was greatly expanded to have way more toys than those released in the original Car Robots line. While most of these extra releases were mere redecos of preexisting molds from G1, G2, Beast Wars, Machine Wars, and Beast Machines (including some that were made for those lines but not first released until this line), there were four completely brand new molds made for this line that were an anomaly among all the other preexisting molds. Said four new molds were the Basic class Spychanger-styled toys of Scourge, X-Brawn, Optimus Prime, and Ultra Magnus.





By all appearances, these four new figures stand out as completely random in their existence as all-new molds created specifically for the Hasbro version of the line, when not a single other figure released in this line was a new mold made specifically for the Hasbro line. Yet, following the third Basic Class wave that consisted of the four G1-molded Decepticon combiners, these four unique cases came along as the line's fourth Basic Class wave, released in January 2002.

As of late, I've been thinking about why these four figures were made at all, why Hasbro spent the money and effort into having these four made, instead of just releasing more redecos of existing Basic Class molds from Beast Wars or Beast Machines to create more non-show toyline-original characters (after all, the very next Basic Class wave, Wave 5, saw the release of a brown redeco of Beast Machines Obsidian).

At the time of this wave's release, January 2002, the cartoon was on a sort of hiatus on Fox Kids, airing reruns until new episodes resumed later in February. And the first of these new episodes to air that year was none other than Episode 33, "Maximus Emerges", the episode that finally saw the long-awaited debut of Fortress Maximus's robot mode. And later in May, Transfandom.com started reporting preorders for Hasbro release of the Car Robots Brave Maximus toy as Robots in Disguise Fortress Maximus, which was to have been exclusive to FAO Schwartz stores and certain online retailers like Action Figure Express and Big Bad Toy Store.

The product description from Action Figure Express even specified that it was going to be released in the original Car Robots packaging (suggesting that Hasbro had simply acquired overstock from Takara) and would see release later in August 2002. However, this release did not happen because the G1 Fortress Maximus toy mold (which the Car Robots/RID figure was made from) failed to pass Hasbro's drop tests, and thus did not meet their safety standards at the time.

But, that does not change the fact that Hasbro did originally have every intention of bringing the set over to release in the Robots in Disguise line. And seeing as how the Spychanger toys scaled the best with Maximus's city mode in order to get the most playability out of it...



...I feel like Hasbro may have wanted some size-appropriate smaller toys of some of the more major characters from the show. Namely, Scourge actually went inside Maximus's shoulder compartment in the show, so a Spychanger-sized toy of him made sense to let kids recreate that scene in toy form.



And if there was going to be a Scourge, it'd then make sense to have an Optimus for him to face off against. Though, the length of his fire truck mode probably made it more practical for his toy to be bigger than the average Spychanger and thus turn into his super robot mode instead of his cab-only normal robot mode. And if Optimus was gonna get a (larger-than-normal) Spychanger-esque toy, why not also Ultra Magnus?

That then just left Scourge's 2-pack companion needing to be figured out, since his toy was normal Spychanger-sized and all normal Spychangers were sold as 2-packs in the mass retail Basic Class at the time (as this was before the single-packed "Spy Changer" releases that would come later as store exclusives). Ultimately, Scourge's companion ended up being X-Brawn, and I think I may have figured out why.

The first wave of Basic Class toys consisted of three 2-packs featuring the six cartoon-character Spychangers from the Car Robots line, but the second wave (preceding the Wave 3 Decepticon Combiner limbs) consisted of two 2-packs featuring four more non-cartoon Spychangers made from molds that had originally been created for the Generation 2 line's assortments of Go-Bots, but were never released until Robots in Disguise in 2001. These four were Daytonus, Side Burn, Prowl 2, and Side Swipe.





Since two of these were Spychanger versions of non-Spychanger Autobot Brothers Side Burn and Prowl (I'm not gonna get into the can of worms that is "Prowl 2"; it was likely that Hasbro simply viewed the toy as just Prowl and didn't give a rat's head about anomalous "2" in his name), it would logically stand to reason that a Spychanger version of X-Brawn would be just the thing needed to go with them to complete the trio. Thus, X-Brawn became Scourge's companion piece, fitting the bill for their 2-pack release while simultaneously completing the three Autobot Brothers in Spychanger form.

...

...But then, as mentioned above, the Brave Maximus import release got canceled. So, this wave of Basic class figures that had been made with the anticipation of interacting with the big city playset toy suddenly no longer had said playset to go with them, and just released as they were anyway since Hasbro had already put the effort into having them made in the first place.

But hey! That's just a theory!

A TOY theory!

Aaaaaaaaaand cut!

[D-Maximal_Primal]

Devil God Fire Convoy: unite!

[Rodimus Prime]

What did the 5 fingers say to the face?

[D-Maximal_Primal]

What did the 5 fingers say to the face?

Better not make any dad jokes or I'll cut myself free

[Emerje]

I've been theorizing about something from the RID 2001 toyline lately.

I don't think you're too off on that, they also scale better with Ruination.

As for Prowl "2" I think that has to do with him being the only one in his Super Mode colors. I'm thinking they intended to do two versions of everyone and the repaints of Sideburn and X-Brawn would have also had "2" designations, but for whatever reason we didn't get a regular Prowl making the "2" standout.

Emerje

[Sabrblade]

I've been theorizing about something from the RID 2001 toyline lately.

I don't think you're too off on that, they also scale better with Ruination.

As for Prowl "2" I think that has to do with him being the only one in his Super Mode colors. I'm thinking they intended to do two versions of everyone and the repaints of Sideburn and X-Brawn would have also had "2" designations, but for whatever reason we didn't get a regular Prowl making the "2" standout.

Emerje

I'd say you're exactly correct about the anomalous "2" numerical, since store computer listings of the time revealed that the Super redecos of the Brothers were indeed originally named "Side Burn 2", X-Brawn 2", etc. The Spychanger toy wad released before them, which probably would have been back when they still had those "2" names internally, until things changed when the Deluxes saw release some months later, leaving the Spychanger's numerical an awkward holdover.

[D-Maximal_Primal]

RiD2001 has enjoyed some love in my house lately, have some photos of the fun.

[Sabrblade]

He's mistransformed. The super mode torso goes inside the shoulder pads and arm gauntlets, not on top of them.

[D-Maximal_Primal]

He's mistransformed. The super mode torso goes inside the shoulder pads and arm gauntlets, not on top of them.

That explains so much, thanks!

[Ebonsaber]

He's mistransformed. The super mode torso goes inside the shoulder pads and arm gauntlets, not on top of them.

That explains so much, thanks!

The small pistol is also clipped to the center front bottom of the cab handle side up, becoming another wheel.

[Emerje]

The small pistol is also clipped to the center front bottom of the cab handle side up, becoming another wheel.

Intended so you can drive the cab around without the back end, which, let's face it, is silly.




Emerje

[Rodimus Prime]

But hilarious.

[Overcracker]

25 Years Later... my R.ID guys are starting to fall apart.

X-Brawn is still in good shape, but Sideburn has a cracked roof balljoint, and Prowl has developed super loose door ball joints and has yellowed terribly even though he's been away from the sun and lights packed in a box.

IMG_9453.jpg

IMG_9451.jpg

IMG_9446.jpeg

9447.jpg

head.jpg

Prowl:

IMG_9454.jpg

[Overcracker]

My review of R.I.D Scourge:

[Nemesis Destron]

Damnation that it happened and here I thought I was lucky but I guess it's inevitable.

I noticed that my God Fire Convoy has a wheel that has split and it's just 1 so far, Magnus's arm to be exact. This of course caused me to check my other figures like the other 3 Fire Convoy's I have, 2 yellow and 1 red.

Is there is no tip on saving other rubber wheels of this horrible fate like applying Armor All or Vaseline?