Seibertron.com Energon Pub Forums

News Credits: 317 · by **chuckdawg1999** » Thu Feb 11, 2021 4:13 pm

Burn wrote:Honestly thought he'd be a bit bigger.

I did too, just looking at all the solo pics it just looked so much more imposing.

News Credits: 55 · by **o.supreme** » Thu Feb 11, 2021 4:32 pm

I didn't purchase one, but it's still impressive. Some of the pics have odd placement, but in pretty much every one, the top of Fort Max's head reaches the top of Unicron's shoulder, not sure where the size issue is. It's always been said to be 27 inches in Robot Mode, 30 in planet mode. Aso as far as mass, yeah it's nearly Double that of any other titan.

News Credits: 440 · by **Sabrblade** » Thu Feb 11, 2021 5:19 pm

And let's not forget that Metroplex and Fort Max are only as tall as they are because they are both hollow as all get out.

News Credits: 42 · by **TF-fan kev777** » Thu Feb 11, 2021 5:20 pm

I wonder how many might have backed it, but have since ran into financial troubles/job loss and will end up having to sell it for a profit because of their situation.

I didn't back it, but that is the exact spot I would be in if I did. Not covid-19 related in my case, but still took a hit on something else last year.

For anyone in that situation, I hope you can get as much as possible.

News Credits: 55 · by **o.supreme** » Thu Feb 11, 2021 6:09 pm

Many have unfortunately lost jobs. Many however have also saved stimulus and perhaps other assistance some government may offer. Ironically many could probably afford to back one now when they couldn't during in the summer of 2019

News Credits: 1641 · by **D-Maximal_Primal** » Fri Feb 12, 2021 12:48 pm

I couldn't afford Unicron at the time he came out, and with other things, I really couldn't afford to pay for him now either, moreso because I realized I just don't care enough to spend the kind of dough I had pre-ordered him for. So I did cancel him, and at no cost since I got in the preorder before any kind of down payment was required.

News Credits: 440 · by **Sabrblade** » Sat Feb 13, 2021 11:23 am

https://twitter.com/uranusdd/status/1360420223883509762

When my friend received the War for Cybertron Unicron, it was broken

News Credits: 22 · by **Rodimus Prime** » Sat Feb 13, 2021 12:45 pm

That was the only part that broke? I mean that's a big deal as well, but it still could have been worse. Hopefully Hasbro offers replacement parts. For that price, it should have been cushioned much better. Packing materials aren't that expensive.

News Credits: 1 · by **Gauntlet101010** » Sat Feb 13, 2021 1:34 pm

It doesn't look like it's on a joint. Should be fixable.

That said - YIKES! What an unwelcome surprise.

News Credits: 241 · by **Jelze Bunnycat** » Sat Feb 13, 2021 2:42 pm

Rodimus Prime wrote:That was the only part that broke? I mean that's a big deal as well, but it still could have been worse. Hopefully Hasbro offers replacement parts. For that price, it should have been cushioned much better. Packing materials aren't that expensive.

If we're going all cardboard, no styrofoam or plastic inserts, at the very least the middle or every 1/3 should have been anchored. Weren't the Cyber series packaged the same way? :-?

Do tell him to notify Hasbro and see what they offer. At the very least they could learn from this and prevent similar breaks in the future.

News Credits: 440 · by **Sabrblade** » Sat Feb 13, 2021 2:44 pm

Yeah, hopefully Hasbro will offer a replacement part for that person's friend.

MyFigureCollection.net collection · by **Emerje** » Sat Feb 13, 2021 3:54 pm

Rodimus Prime wrote:For that price, it should have been cushioned much better. Packing materials aren't that expensive.

Especially after Hasbro has said multiple times that they're putting a lot of effort into the packing to prevent breakage. And this person who has the broken part likely picked it up from a local shop where it came off a pallet rather than through the mail so that's even more troubling.

Emerje

News Credits: 4 · by **Chriphord** » Sat Feb 13, 2021 10:23 pm

I like how the instruction booklet still has the yellow center on it.

News Credits: 55 · by **o.supreme** » Sat Feb 13, 2021 10:39 pm

Just to relate an experience. Someone posted on YouTube about getting an ER Scorponok with missing segments from one of the scorpion legs. Hasbro had no replacement parts,nor another Scorponok, so they offered a free deluxe selects figure they had in stock as compensation. I would hope for something like Unicron Hasbro would be prepared for such things... But it doesn't instill confidence.

News Credits: 440 · by **Sabrblade** » Sat Feb 13, 2021 10:52 pm

Chriphord wrote:I like how the instruction booklet still has the yellow center on it.

I think that's drawn artwork on the booklet rather than a stock photo.

News Credits: 1 · by **Gauntlet101010** » Sat Feb 13, 2021 11:10 pm

Sabrblade wrote:
Chriphord wrote:I like how the instruction booklet still has the yellow center on it.
I think that's drawn artwork on the booklet rather than a stock photo.

Yeah, but it's a real tease, isn't it?

News Credits: 4 · by **Chriphord** » Sun Feb 14, 2021 12:22 am

Gauntlet101010 wrote:
Sabrblade wrote:
Chriphord wrote:I like how the instruction booklet still has the yellow center on it.
I think that's drawn artwork on the booklet rather than a stock photo.

Yeah, but it's a real tease, isn't it?

Yea, very painful. It also makes it "obvious" that they had every intention of making the center of his maw yellow right until the actual production stage, where they just decided to say "f*** it, let's save $3". It just makes me sad.

by **turbobluestreak** » Wed Feb 17, 2021 12:51 am

Sabrblade wrote:Something on a smaller scale, sure.

But another $600 giant? Y'all really wanna play this game a second time?

Not if it's going to be more suprise changes like they just pulled on Unicron. I'm very disappointed about the blue Maw. I would really like Hasbro to paint it but everyone that contacted customer service got back the same response of how they pride themselves on their transparency.

tbs

MyFigureCollection.net collection · by **Emerje** » Wed Feb 17, 2021 2:13 am

A friend that isn't much of a Transformers fan sent these to me through Messenger. They come from someone on Twitter who found them posted on Instagram by someone who found them on an unnamed Facebook page (gotta love social media :roll:

).

Not sure just how easy it is to remove the kibble, I'm undecided if I'll be keeping all of it attached or not. You only get one set of wings/ring so it wont display that well, IMO, if you do try to do this.

Emerje

News Credits: 22 · by **Rodimus Prime** » Wed Feb 17, 2021 2:24 am

So the person took off all the planet panels, and was able to get not only a more tidy-looking robot mode, but a planet mode as well? That's pretty good. Like you said, having one set of rings kinda dampens it, but it's still a cool idea. If I had the figure, I'd leave the rings on the back of the robot. But I don't know if I'd be brave enough to start taking him apart in the 1st place. $600 is $600.

News Credits: 440 · by **Sabrblade** » Wed Feb 17, 2021 10:31 am

It kinda looks like the joints circled in red are held by pins, so those circles may be indicating the spots that need the most work to remove the planet kibble.

News Credits: 42 · by **TF-fan kev777** » Wed Feb 17, 2021 11:23 am

Sabrblade wrote:It kinda looks like the joints circled in red are held by pins, so those circles may be indicating the spots that need the most work to remove the planet kibble.

Possibly, but those look like they would end up being really big pins. Possibly screws instead? At least for the parts on the legs, that would make more sense to me than pins, just due to how large they would be.

News Credits: 17 · by **AcademyofDrX** » Wed Feb 17, 2021 12:35 pm

They look to me like the breakaway connections that are designed to come loose rather than break the plastic, but it's hard to tell from the pictures.

News Credits: 96 · by **-Kanrabat-** » Thu Feb 18, 2021 1:49 pm

Prime VS Prime have the review up!

News Credits: 1350 · by **ZeroWolf** » Thu Feb 18, 2021 5:37 pm

Greetings Seibertronians! We have a monster sized review to share with you today! Fellow Seibertron user, -Kanrabat-, has let us know that fellow Seibertron user, and YouTube toy reviewer, PrimeVsPrime has uploaded his review for HasLab's Unicron!

HasLab's Unicron is a behemoth of a Transformer, taking the title away from Titans Returns Titan Class Fortress Maximus! The toy is also the most expensive officially licensed Transformers ever created, costing near $600. Fans who backed the Chaos Bringer will all recieve their copies soon enough.

We have embedded the review below for your convenience:

What do you think of this review? Are you expecting his arrival?

Shout out in the Energon Pub and stay tuned to Seibertron for all the latest news and reviews!