Transformers Generations Combiner Wars Discussion Thread
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by prjkt Fri Jan 09, 2015 7:36 am
-

prjkt - Headmaster Jr
- Posts: 592
- News Credits: 3
- Joined: Mon Apr 21, 2014 6:18 pm
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by MemphisR56 Fri Jan 09, 2015 7:39 am
Then again, none of the silhouettes look like Alpha Bravo either.
Left leg is Skydive, Right leg is Air Raid, Left arm looks like Firefly (can clearly identify his gun pegged into the back of the wing, and the Right arm, is a bit mishmashy, but it looks like the forearm is also firefly, you can see the tailfin folded up just above the wrist. You can also just see the barrel of *another* Firefly rifle next to Superion's head, as though it's symmetrically plugged into the back of the wing on that side too. If that's a firefly repaint as slingshot, they're in the correct positions to line up with a G1 Box-Art and G1 series accurate Superion.
Pinch of salt, though, as it could just be a placeholder configuration for the teaser with 2 fireflies.
Twitter: @Ratchphis
-

MemphisR56 - Pretender
- Posts: 778
- News Credits: 6
- Joined: Thu Aug 08, 2013 5:36 am
- Location: Liverpool, UK
- Strength: 7
- Speed: 3
- Endurance: 9
- Rank: 5
- Courage: 9
- Firepower: 6
- Skill: 6
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by ScottyP Fri Jan 09, 2015 10:13 am
-

ScottyP - Guardian Of Seibertron
- Posts: 5735
- News Credits: 656
- Joined: Wed May 03, 2006 4:42 pm
- Location: Raleigh, NC
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Cobotron Fri Jan 09, 2015 10:35 am
ScottyP wrote:Remember when I crapped on these toys? Yeah, I take it back. They're fun. I enjoy them. Great line for collectors. I haven't seen the local crew around here this stoked and out on the hunt for official product in a very, very long time.

Burn wrote:Agamemnon wrote:Let's get back to talking about Burn's mammoth snout flopping...
Well I am Australian. It's kinda what we're known for.
-

Cobotron - God Of Transformers
- Posts: 10216
- News Credits: 41
- Joined: Tue Sep 23, 2014 10:53 am
- Location: High Plains Drifter
- Alt Mode: A Sleeping Bear
- Strength: 8
- Intelligence: 9
- Speed: 7
- Endurance: 8
- Rank: 5
- Courage: 9
- Firepower: 5
- Skill: 10
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Sabrblade Fri Jan 09, 2015 12:00 pm
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
-

Sabrblade - God Of Transformers
- Posts: 40095
- News Credits: 462
- Joined: Thu Dec 06, 2007 8:22 pm
- Location: Tampa, FL
- Strength: 7
- Intelligence: 10
- Speed: 7
- Endurance: 8
- Rank: 9
- Courage: 8
- Firepower: 7
- Skill: 9
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by OptimalOptimus2 Fri Jan 09, 2015 12:15 pm
Rodimus Prime wrote:You can't make me disappear. I am not feet.
I'm sorry but this has to be the most ridiculous statement of all Seibertron history.

-

OptimalOptimus2 - Gestalt Team Leader
- Posts: 984
- News Credits: 13
- Joined: Sat Mar 16, 2013 4:49 pm
- Strength: 10
- Intelligence: 8
- Speed: 9
- Endurance: 10
- Rank: 10
- Courage: 10
- Firepower: 10
- Skill: 6
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Sabrblade Fri Jan 09, 2015 12:17 pm
Takara never made any new molds for their counterpart lines to Hasbro's Classics, Universe, and Generations lines (Henkei! Henkei!, United, Generations, and Legends all used existing molds).OptimalOptimus2 wrote:Takara's Superion would be much better. When it comes to paint and details most likely. Plus, I think Takara may make their own combiners. How about a Dinoking?
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
-

Sabrblade - God Of Transformers
- Posts: 40095
- News Credits: 462
- Joined: Thu Dec 06, 2007 8:22 pm
- Location: Tampa, FL
- Strength: 7
- Intelligence: 10
- Speed: 7
- Endurance: 8
- Rank: 9
- Courage: 8
- Firepower: 7
- Skill: 9
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Peridot Fri Jan 09, 2015 1:36 pm
Why does he have two of the same limbs for arms?
-

Peridot - Combiner
- Posts: 495
- Joined: Mon Aug 05, 2013 5:34 pm
- Strength: 7
- Intelligence: 9
- Speed: 5
- Endurance: 7
- Rank: 7
- Courage: 5
- Firepower: 8
- Skill: 8
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Sabrblade Fri Jan 09, 2015 1:41 pm
Because there only exist three jet limb molds? Alpha Bravo's not in this.Metro Prime wrote:Why does he have two of the same limbs for arms?
If Takara makes a Slingshot, it'll more than likely be made from one of the other three jet limbs, unless Hasbro has secret plans for a new Slingshot mold further down the line.
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
-

Sabrblade - God Of Transformers
- Posts: 40095
- News Credits: 462
- Joined: Thu Dec 06, 2007 8:22 pm
- Location: Tampa, FL
- Strength: 7
- Intelligence: 10
- Speed: 7
- Endurance: 8
- Rank: 9
- Courage: 8
- Firepower: 7
- Skill: 9
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Flux Convoy Fri Jan 09, 2015 2:12 pm
Mkall wrote:Got 4/5ths of Superion a couple days ago. I gotta say it's the most fun I've had with a combiner in years.
I don't have any of them in hand yet. They are, however, the most excited I have been for retail product in years. That coming from someone who really doesn't care about Superion all that much. I think it's far past time these guys got their due though. The deluxes all look great on their own from the photos. I'm very curious to see what Takara do for their releases. I wonder who is gonna let the first images of devastator slip.
- Flux Convoy
- City Commander
- Posts: 3032
- News Credits: 20
- Joined: Mon Jun 30, 2003 6:59 am
- Location: Spinning my wheels into the void.
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by SkyWarpt Fri Jan 09, 2015 3:45 pm
on Dragstrip!
Just got Powerglide and leg joints will definitely be a problem at elbows. Maybe some plasti dip would tighten them up?
-

SkyWarpt - Headmaster Jr
- Posts: 502
- News Credits: 1
- Joined: Sat Apr 23, 2011 11:02 am
- Location: Killeen, TX
- Strength: 9
- Intelligence: N/A
- Speed: 10
- Endurance: 10
- Rank: 2
- Courage: 9
- Firepower: 7
- Skill: Infinity
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by SkyWarpt Fri Jan 09, 2015 3:53 pm
-

SkyWarpt - Headmaster Jr
- Posts: 502
- News Credits: 1
- Joined: Sat Apr 23, 2011 11:02 am
- Location: Killeen, TX
- Strength: 9
- Intelligence: N/A
- Speed: 10
- Endurance: 10
- Rank: 2
- Courage: 9
- Firepower: 7
- Skill: Infinity
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Emerje Fri Jan 09, 2015 5:32 pm
Sabrblade wrote:Takara never made any new molds for their counterpart lines to Hasbro's Classics, Universe, and Generations lines (Henkei! Henkei!, United, Generations, and Legends all used existing molds).OptimalOptimus2 wrote:Takara's Superion would be much better. When it comes to paint and details most likely. Plus, I think Takara may make their own combiners. How about a Dinoking?
Not new molds, but they have done remolds like Ratbat and Cloud Brawn so maybe an entirely new figure is out of the question, but remolding an existing jet isn't.
Emerje
-

Emerje - News Staff
- Posts: 11491
- News Credits: 309
- Joined: Tue Aug 13, 2013 10:15 am
- Location: Maine
- Alt Mode: Lobster Moose
- Strength: 9
- Intelligence: 7
- Speed: 4
- Endurance: 8
- Rank: 6
- Courage: 10
- Firepower: 3
- Skill: 6
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by megatronus Fri Jan 09, 2015 5:38 pm
I just need Silverbolt...
Cobotron wrote:Hey! You seemed to have attracted a wild Megatronus. They're hard to find, but boy are they fun when you catch one!
-

megatronus - Podcast Staff
- Posts: 5750
- News Credits: 122
- Joined: Wed Jun 29, 2011 12:57 pm
- Location: NYC
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Cobotron Fri Jan 09, 2015 5:53 pm
megatronus wrote:I just need Silverbolt...
Hey! thats the name of my new club. Wanna be in it?

Burn wrote:Agamemnon wrote:Let's get back to talking about Burn's mammoth snout flopping...
Well I am Australian. It's kinda what we're known for.
-

Cobotron - God Of Transformers
- Posts: 10216
- News Credits: 41
- Joined: Tue Sep 23, 2014 10:53 am
- Location: High Plains Drifter
- Alt Mode: A Sleeping Bear
- Strength: 8
- Intelligence: 9
- Speed: 7
- Endurance: 8
- Rank: 5
- Courage: 9
- Firepower: 5
- Skill: 10
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Jelze Bunnycat Fri Jan 09, 2015 5:57 pm
Emerje wrote:Sabrblade wrote:Takara never made any new molds for their counterpart lines to Hasbro's Classics, Universe, and Generations lines (Henkei! Henkei!, United, Generations, and Legends all used existing molds).OptimalOptimus2 wrote:Takara's Superion would be much better. When it comes to paint and details most likely. Plus, I think Takara may make their own combiners. How about a Dinoking?
Not new molds, but they have done remolds like Ratbat and Cloud Brawn so maybe an entirely new figure is out of the question, but remolding an existing jet isn't.
Emerje
Ratbat and Cloud Brawn are both based on pre-existing tooling that originally went unused: Ratbat used the Gen. Scourge mold's alternate head (alternate meaning it's "built into the mold" like the regular head), and Brawn is based on the canceled "GDO" release.
- Jelze Bunnycat =:3
Looking for:
- TR Furos (Hardhead's head) and Crashbash (lost him
- PotP Punch head
- TR Galvatron right arm (the gun one)
- CW Brake-Neck/UW Wildrider, CW Offroad
- TR Twinferno & Grotusque
- Greenlight, Lancer and PotP Elita-1
- Legacy Core Slug, Sludge & Snarl
-

Jelze Bunnycat - God Of Transformers
- Posts: 19464
- News Credits: 241
- Joined: Thu Feb 17, 2005 6:45 am
- Location: McKinney, Texas, USA; Delft, the Netherlands
- Strength: 5
- Intelligence: 9
- Speed: 8
- Endurance: 7
- Rank: 1
- Courage: 8
- Skill: 5
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Optimizzy Fri Jan 09, 2015 6:09 pm
.JelZe GoldRabbit wrote:Emerje wrote:Sabrblade wrote:Takara never made any new molds for their counterpart lines to Hasbro's Classics, Universe, and Generations lines (Henkei! Henkei!, United, Generations, and Legends all used existing molds).OptimalOptimus2 wrote:Takara's Superion would be much better. When it comes to paint and details most likely. Plus, I think Takara may make their own combiners. How about a Dinoking?
Not new molds, but they have done remolds like Ratbat and Cloud Brawn so maybe an entirely new figure is out of the question, but remolding an existing jet isn't.
Emerje
Ratbat and Cloud Brawn are both based on pre-existing tooling that originally went unused: Ratbat used the Gen. Scourge mold's alternate head (alternate meaning it's "built into the mold" like the regular head), and Brawn is based on the canceled "GDO" release.
Was scourge the. Designed to be re-tooled into rat bat and at some point it was canceled stateside?
While I love G1 I also love new innovations and takes on the characters.
I prefer official Hasbro releases of stuff for the most part
I'm not a huge fan of Japanese original Transformers media or designs.
It's easier for me to say which are my LEAST favorite toy lines: Beast Machines, Robots in Disguise.
TFCon List: Classics Skywarp, General Optimus, BW Airrazor, Transmetal Tarantulus, Alternity Prime, Fire Convoy
-

Optimizzy - Headmaster
- Posts: 1043
- News Credits: 3
- Joined: Wed Dec 12, 2012 6:43 pm
- Location: Walhalla, SC
- Strength: 5
- Intelligence: 9
- Speed: 5
- Endurance: 7
- Rank: 2
- Courage: 8
- Firepower: 10
- Skill: 6
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Jelze Bunnycat Fri Jan 09, 2015 7:33 pm
Optimizzy wrote:.JelZe GoldRabbit wrote:Emerje wrote:Sabrblade wrote:Takara never made any new molds for their counterpart lines to Hasbro's Classics, Universe, and Generations lines (Henkei! Henkei!, United, Generations, and Legends all used existing molds).OptimalOptimus2 wrote:Takara's Superion would be much better. When it comes to paint and details most likely. Plus, I think Takara may make their own combiners. How about a Dinoking?
Not new molds, but they have done remolds like Ratbat and Cloud Brawn so maybe an entirely new figure is out of the question, but remolding an existing jet isn't.
Emerje
Ratbat and Cloud Brawn are both based on pre-existing tooling that originally went unused: Ratbat used the Gen. Scourge mold's alternate head (alternate meaning it's "built into the mold" like the regular head), and Brawn is based on the canceled "GDO" release.
Was scourge the. Designed to be re-tooled into rat bat and at some point it was canceled stateside?
We can only assume those were the original plans. Like many pretools (pre-planned retools), the alternate head was visible in the original's instructions, in this case Scourge's, but ultimately not used. Nowadays a good majority of molds have alternate parts, making the overall process more efficient.
I'd give a total list, but it's really long.
- Jelze Bunnycat =:3
Looking for:
- TR Furos (Hardhead's head) and Crashbash (lost him
- PotP Punch head
- TR Galvatron right arm (the gun one)
- CW Brake-Neck/UW Wildrider, CW Offroad
- TR Twinferno & Grotusque
- Greenlight, Lancer and PotP Elita-1
- Legacy Core Slug, Sludge & Snarl
-

Jelze Bunnycat - God Of Transformers
- Posts: 19464
- News Credits: 241
- Joined: Thu Feb 17, 2005 6:45 am
- Location: McKinney, Texas, USA; Delft, the Netherlands
- Strength: 5
- Intelligence: 9
- Speed: 8
- Endurance: 7
- Rank: 1
- Courage: 8
- Skill: 5
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Gearslide Fri Jan 09, 2015 7:42 pm
I'm kinda hoping that's what Takara does. If they ARE bringing Slingshot back.
And if they DO that, I wonder if they'll bring back Wildrider for their Menasor set.
- Gearslide
- Headmaster Jr
- Posts: 503
- Joined: Thu Feb 19, 2009 2:10 pm
- Strength: 6
- Intelligence: 8
- Speed: 6
- Endurance: 5
- Rank: 2
- Courage: 4
- Firepower: 1
- Skill: 9
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Agamemnon Fri Jan 09, 2015 8:18 pm
Gearslide wrote:I feel like you could stick Air Raid's head on Fireflight's body, and with a good enough paint job, you'd have a snazy Slingshot toy.
I'm kinda hoping that's what Takara does. If they ARE bringing Slingshot back.
And if they DO that, I wonder if they'll bring back Wildrider for their Menasor set.
Or use Alpha Bravo's head...
william-james88 wrote:Also be weary of hope in this hobby. Hope is just undiscovered disappointment.
Agamemnon, barebacked rider of flying robo-dragon, and not often constipated either...My nephew wrote:Bacon is meat candy.
(I answer to Ag or Ags. Agamemnon is too long to type. Plus, there is something elemental about calling me Ag.
-

Agamemnon - Faction Commander
- Posts: 4980
- News Credits: 10
- Joined: Tue Nov 07, 2006 10:41 am
- Location: North Side, Twin Cities
- Alt Mode: A donut. Mmmmm...donut
- Strength: 5
- Intelligence: 9
- Speed: 2
- Endurance: 6
- Rank: 2
- Courage: 9
- Firepower: 5
- Skill: 8
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Gearslide Fri Jan 09, 2015 8:38 pm
Agamemnon wrote:Gearslide wrote:I feel like you could stick Air Raid's head on Fireflight's body, and with a good enough paint job, you'd have a snazy Slingshot toy.
I'm kinda hoping that's what Takara does. If they ARE bringing Slingshot back.
And if they DO that, I wonder if they'll bring back Wildrider for their Menasor set.
Or use Alpha Bravo's head...
...Alpha Bravo has both a visor and a mouth plate. And G1 Slingshot has never had either of those things as far as I know. Although he did have "Aviators" of a sort in the G1 cartoon.
Air Raid's head has a similar face, head shape, and even the "rounded top" that Slingshot's has.
- Gearslide
- Headmaster Jr
- Posts: 503
- Joined: Thu Feb 19, 2009 2:10 pm
- Strength: 6
- Intelligence: 8
- Speed: 6
- Endurance: 5
- Rank: 2
- Courage: 4
- Firepower: 1
- Skill: 9
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Optimizzy Fri Jan 09, 2015 8:50 pm
While I love G1 I also love new innovations and takes on the characters.
I prefer official Hasbro releases of stuff for the most part
I'm not a huge fan of Japanese original Transformers media or designs.
It's easier for me to say which are my LEAST favorite toy lines: Beast Machines, Robots in Disguise.
TFCon List: Classics Skywarp, General Optimus, BW Airrazor, Transmetal Tarantulus, Alternity Prime, Fire Convoy
-

Optimizzy - Headmaster
- Posts: 1043
- News Credits: 3
- Joined: Wed Dec 12, 2012 6:43 pm
- Location: Walhalla, SC
- Strength: 5
- Intelligence: 9
- Speed: 5
- Endurance: 7
- Rank: 2
- Courage: 8
- Firepower: 10
- Skill: 6
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Tyrannacon Fri Jan 09, 2015 9:38 pm
-

Tyrannacon - Headmaster
- Posts: 1000
- News Credits: 90
- Joined: Sat Jul 20, 2013 11:31 pm
- Location: Bloomsburg, PA
- Alt Mode: Transmetal Tyrannosaurus with Intergalactic-capable Flight Mode
- Strength: 10
- Intelligence: 10
- Speed: 10
- Endurance: 10
- Rank: 8
- Courage: 9
- Firepower: 10
- Skill: 10
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by shajaki Fri Jan 09, 2015 10:02 pm
preorder from BBTS or TFsource. you can cancel at any time with BBTS, and any time before release with TFsourceTyrannacon wrote:To pre-order the Takara Tomy version of Megatron or to wait and see what the Hasbro one holds. Oh decisions.
-

shajaki - Matrix Keeper
- Posts: 9943
- News Credits: 293
- Joined: Sat Mar 24, 2012 6:56 pm
- Location: Edmonton Alberta Canada
Re: Transformers Generations Combiner Wars Discussion Thread
Posted by Tyrannacon Fri Jan 09, 2015 10:57 pm
shajaki wrote:preorder from BBTS or TFsource. you can cancel at any time with BBTS, and any time before release with TFsourceTyrannacon wrote:To pre-order the Takara Tomy version of Megatron or to wait and see what the Hasbro one holds. Oh decisions.
I may just do that. I've been looking forward to this incarnation of Megatron for months, I want to make sure I get him to put him in my shrine.
-

Tyrannacon - Headmaster
- Posts: 1000
- News Credits: 90
- Joined: Sat Jul 20, 2013 11:31 pm
- Location: Bloomsburg, PA
- Alt Mode: Transmetal Tyrannosaurus with Intergalactic-capable Flight Mode
- Strength: 10
- Intelligence: 10
- Speed: 10
- Endurance: 10
- Rank: 8
- Courage: 9
- Firepower: 10
- Skill: 10




