Transformers and More @ The Seibertron Store
![Visit shop.seibertron.com to buy "TRANSFORMERS #1 2nd ptg Cvr A Image Comics 2023 0923IM824 (CA) Howard 240210C"](https://www.seibertron.com/images/ebay/comic-books/image/transformers/01-2nd-ptg-A-240210C/t-DSC07428.jpg)
Earthrise isn't the main line anymore though. It's dead. Kingdom's the main line now, while Scourge's mold is in Studio Series.TK415 wrote:I was thinking with the Cyberverse Alpha Trion toy and the main line so G1 they may repaint Scourge into Alpha Trion for the main line. So, not off topic, just a fan made prototype to get a visual representation of a speculation for the main line. Those two forums would be the specific spots but it is also a general idea to consider in a main line forum.
Shadowman wrote:This is Sabrblade we're talking about. His ability to store trivial information about TV shows is downright superhuman.
Caelus wrote:My wife pointed out something interesting about the prehistoric Predacons. I said that everyone was complaining because transforming for them mostly consisted of them just standing up-right. She essentially said, 'So? That's what our ancestors did.'
Sabrblade wrote:Earthrise isn't the main line anymore though. It's dead. Kingdom's the main line now, while Scourge's mold is in Studio Series.TK415 wrote:I was thinking with the Cyberverse Alpha Trion toy and the main line so G1 they may repaint Scourge into Alpha Trion for the main line. So, not off topic, just a fan made prototype to get a visual representation of a speculation for the main line. Those two forums would be the specific spots but it is also a general idea to consider in a main line forum.
-Kanrabat- wrote:Sabrblade wrote:Earthrise isn't the main line anymore though. It's dead. Kingdom's the main line now, while Scourge's mold is in Studio Series.TK415 wrote:I was thinking with the Cyberverse Alpha Trion toy and the main line so G1 they may repaint Scourge into Alpha Trion for the main line. So, not off topic, just a fan made prototype to get a visual representation of a speculation for the main line. Those two forums would be the specific spots but it is also a general idea to consider in a main line forum.
Exactly.
The guy is a bit confused, but at least he got the spirit.
TK415 wrote:-Kanrabat- wrote:Sabrblade wrote:Earthrise isn't the main line anymore though. It's dead. Kingdom's the main line now, while Scourge's mold is in Studio Series.TK415 wrote:I was thinking with the Cyberverse Alpha Trion toy and the main line so G1 they may repaint Scourge into Alpha Trion for the main line. So, not off topic, just a fan made prototype to get a visual representation of a speculation for the main line. Those two forums would be the specific spots but it is also a general idea to consider in a main line forum.
Exactly.
The guy is a bit confused, but at least he got the spirit.
Oh man, you two are right, my bad. I love the forums, I haven't been using them as much just been busy recently. Mixed up the names of the toy line trilogy.
Thanks for the guidance, sorry for the trouble. It is a good thread, I used to read it regularly when you first made it.-Kanrabat- wrote:TK415 wrote:-Kanrabat- wrote:Sabrblade wrote:Earthrise isn't the main line anymore though. It's dead. Kingdom's the main line now, while Scourge's mold is in Studio Series.TK415 wrote:I was thinking with the Cyberverse Alpha Trion toy and the main line so G1 they may repaint Scourge into Alpha Trion for the main line. So, not off topic, just a fan made prototype to get a visual representation of a speculation for the main line. Those two forums would be the specific spots but it is also a general idea to consider in a main line forum.
Exactly.
The guy is a bit confused, but at least he got the spirit.
Oh man, you two are right, my bad. I love the forums, I haven't been using them as much just been busy recently. Mixed up the names of the toy line trilogy.
It would also have been in the wrong thread if that post was in Kingdom.
The right thread would have been in the SS86 thread (based on the mold) or in the Select thread (the repaint thread.)
If you want to go nut with wishes, I made a thread just for that where anything goes:
the-tf-you-want-but-you-know-hastak-will-never-make-t78854.php
Rogue-Primal wrote:I've been recently active on WFC2005 lately. But i'm not gone here
I just purchased Smashdown, aka the Chicago Bulls hammer. Initially i though he was weird but he's fun. One the instructions and most reviewers don't mention from stock footage his arms can wield his handle it as a gun. Hammer looks good on Optimus but the hammer handle it a b***h to get into the slot![]()
![]()
The blast effect is cool for Grimlock using Pteraxadon's gun mode. But my favorite image is Smashdown has a fan-made mode a Boombox (basically don't add the handle a and make someone hold it)
Gauntlet101010 wrote:Amazon just cancelled my Conheads preorder. I was hoping that they'd get restocked around September/October due to the preorders earlier last month, but no dice.
I've about lost hope on paying even close to normal prices for those guys.
william-james88 wrote:Gauntlet101010 wrote:Amazon just cancelled my Conheads preorder. I was hoping that they'd get restocked around September/October due to the preorders earlier last month, but no dice.
I've about lost hope on paying even close to normal prices for those guys.
I just got the email. I am so sad about this.
o.supreme wrote:Not sure if Dirge/Ramjet had any sort of release already from TT
Jelze Bunnycat wrote:Getting Krunk in Snapdragon's Dino head is indeed a pain in the tail pipe. Probably doesn't help that Krunk is inserted at an angle.
Your best bet is to lift the Dino head up to fully expose the catch, have Krunk's arms be at an angle and his legs straight, then try to push him in. When attached, Krunk should sit parallel to the back of the head.
Overcracker wrote:Jelze Bunnycat wrote:Getting Krunk in Snapdragon's Dino head is indeed a pain in the tail pipe. Probably doesn't help that Krunk is inserted at an angle.
Your best bet is to lift the Dino head up to fully expose the catch, have Krunk's arms be at an angle and his legs straight, then try to push him in. When attached, Krunk should sit parallel to the back of the head.
Thanks. Got it. But it makes his jaw look awkward, since his legs need to be lower to not give him a protruding lockjaw.
Don't know if I like red eyes more, or his jaw in a better position. Will need to think about it as I fiddle around with him more.
Sentinel_Primal wrote:Overcracker wrote:Jelze Bunnycat wrote:Getting Krunk in Snapdragon's Dino head is indeed a pain in the tail pipe. Probably doesn't help that Krunk is inserted at an angle.
Your best bet is to lift the Dino head up to fully expose the catch, have Krunk's arms be at an angle and his legs straight, then try to push him in. When attached, Krunk should sit parallel to the back of the head.
Thanks. Got it. But it makes his jaw look awkward, since his legs need to be lower to not give him a protruding lockjaw.
Don't know if I like red eyes more, or his jaw in a better position. Will need to think about it as I fiddle around with him more.
The way I personally try to fix the jaw issue is by using the knees as the point of movement for the jaw, rather than Krunk's hips. It's not great, but it kinda fixes part of the issue
Emerje wrote:I prefer the closed jaw and just try to avoid shining light into his empty sockets and thinking of them as being black. It was a nice idea, but it didn't work out so well.
Also his backpack is supposed to be moved down to his hips, but it makes his top half look emaciated and very bottom heavy. People thought PotP Grimlock had big hips!
Emerje
Overcracker wrote:Emerje wrote:I prefer the closed jaw and just try to avoid shining light into his empty sockets and thinking of them as being black. It was a nice idea, but it didn't work out so well.
Also his backpack is supposed to be moved down to his hips, but it makes his top half look emaciated and very bottom heavy. People thought PotP Grimlock had big hips!
Emerje
I like his backpack / chest-piece higher up Not sure what purpose it serves further down.
I think I'll keep Krunk such that the jaw is closed and can use the hip joint as his jaw joint
It should be easy to find something to fill in those empty eye sockets.
Whifflefire wrote:Scorponok finally arrived!
I made the preorder on BBTS when he came back in stock in January (as I'm sure many others did as well), but I have waiting to own this figure since he was revealed back at Toyfair 2020. He was worth the wait! Solid, unlike Metroplex and Fort Max he doesn't squeak when you pick him up, and I'm not normally bothered about ankle tilts, but it really makes a difference for a figure this size. He can hold poses great, and has a magnificent presence to him.
I also got the DNA add-on kit for him. I usually don't go for 3P, but that giant rifle was too much to resist, it's hilariously large and makes him truly overkill.
Return to Transformers Toys Discussion
Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], Majestic-12 [Bot], MSN [Bot], MSNbot Media