The Energon Pub

by **Nemesis Maximo** » Sun Apr 03, 2016 7:55 pm

Burn wrote:
william-james88 wrote:

At this stage Scattorshot seems to be the weakest of them. Otherwise, great modern updates so far. Bring on Strafe!

Scattorshot is only the weakest by virtue of having his awesome BFG on the nose of his ship mode being smaller proportionally. But without looking at the two toys side-by-side, it's a really cool space ship mode IMO.

News Credits: 4862 · by **william-james88** » Sun Apr 03, 2016 8:36 pm

Sigma Magnus wrote:
Burn wrote:
william-james88 wrote:

At this stage Scattorshot seems to be the weakest of them. Otherwise, great modern updates so far. Bring on Strafe!

Well, one always has to be the weakest. Any idea how long until Strafe is revealed?

3 hours maybe? Anyways, I personally find Lightspeed to be the weakest. I just dont see how the wheeljack mold was best for him, the front looks nothing like lightspeed. I would have found the dead end mold to be better even f it doesnt have a spoiler.

News Credits: 4 · by **King Kuuga** » Sun Apr 03, 2016 9:25 pm

Based on previous pictures, I think the Wheeljack mold wins in robot mode, and that was the tipping point.

News Credits: 2 · by **Crosscheck** » Sun Apr 03, 2016 9:33 pm

Unless Strafe is absolute pants, this may be the first UW set that I get. I do want to see more of the Hasbro one first, but Wheeljack instead of 5th use of the Dead End mold and a cool use of the Rook mold is good enough reason for me. Hasbro using the actual tank mold and including Scrounge is a bit of a plus though. The Takara Scattershot is a definite improvement over the minimal remold of the Hasbro one. They both share the same Afterburner, so he is neutral.

News Credits: 174 · by **Hellscream9999** » Sun Apr 03, 2016 9:38 pm

william-james88 wrote:
Sigma Magnus wrote:
Burn wrote:
william-james88 wrote:

At this stage Scattorshot seems to be the weakest of them. Otherwise, great modern updates so far. Bring on Strafe!

Well, one always has to be the weakest. Any idea how long until Strafe is revealed?

3 hours maybe? Anyways, I personally find Lightspeed to be the weakest. I just dont see how the wheeljack mold was best for him, the front looks nothing like lightspeed. I would have found the dead end mold to be better even f it doesnt have a spoiler.

Perhaps, but it looks a lot more like what a 'techno'bot would turn into, instead of a generic car, this is a rare instance of updating the character instead of following the show (it may also be TT's way of using the wheeljack tooling...)

News Credits: 226 · by **Burn** » Sun Apr 03, 2016 9:38 pm

william-james88 wrote:I personally find Lightspeed to be the weakest.

To me he's the second weakest. I can see they didn't put as much work into him than say Nosecone, but looking at those pics, in terms of a modern update it's not THAT bad.

Whereas when I look at Scattorshot, it's hard to still not see Silverbolt.
(Probably helps that I don't own, nor intend to own, Wheeljack)

News Credits: 4862 · by **william-james88** » Sun Apr 03, 2016 9:40 pm

Crosscheck wrote:Unless Strafe is absolute pants, this may be the first UW set that I get. I do want to see more of the Hasbro one first, but Wheeljack instead of 5th use of the Dead End mold and a cool use of the Rook mold is good enough reason for me. Hasbro using the actual tank mold and including Scrounge is a bit of a plus though. The Takara Scattershot is a definite improvement over the minimal remold of the Hasbro one. They both share the same Afterburner, so he is neutral.

Just to be clear, lightspeed from hasbro wouldnt be the dead end mold, but the streetwise mold. I say this because you stated wheeljack, which is an entire retool of breakdown, who was also used for Sunstreaker.

Also, I dont see how the entire alt mode components can be seen as "minimal remold" for Hasbro's Scattershot.

Transformers Generations Combiner Wars Scattershot Gallery

News Credits: 174 · by **Hellscream9999** » Sun Apr 03, 2016 9:49 pm

Burn wrote:
william-james88 wrote:I personally find Lightspeed to be the weakest.

To me he's the second weakest. I can see they didn't put as much work into him than say Nosecone, but looking at those pics, in terms of a modern update it's not THAT bad.

Whereas when I look at Scattorshot, it's hard to still not see Silverbolt.
(Probably helps that I don't own, nor intend to own, Wheeljack)

I would love a lovingly painted cw wheeljack from TT, shame I'd have to buy a bunch of dumb re-repaints with it, in a boxset to get it though

News Credits: 2 · by **Crosscheck** » Sun Apr 03, 2016 9:59 pm

william-james88 wrote:
Crosscheck wrote:Unless Strafe is absolute pants, this may be the first UW set that I get. I do want to see more of the Hasbro one first, but Wheeljack instead of 5th use of the Dead End mold and a cool use of the Rook mold is good enough reason for me. Hasbro using the actual tank mold and including Scrounge is a bit of a plus though. The Takara Scattershot is a definite improvement over the minimal remold of the Hasbro one. They both share the same Afterburner, so he is neutral.

Just to be clear, lightspeed from hasbro wouldnt be the dead end mold, but the streetwise mold. I say this because you stated wheeljack, which is an entire retool of breakdown, who was also used for Sunstreaker.

Also, I dont see how the entire alt mode components can be seen as "minimal remold" for Hasbro's Scattershot.

Transformers Generations Combiner Wars Scattershot Gallery

Having Lightspeed be the fourth use of the Streetwise version is actually worse. At least if it was Dead End there is only one other major release use of that mold.

All of the robot mode components (besides the head) and the combiner head are all the same though, which matters greatly for the combined mode, which is what he will be displayed in. Takara at least remolded the robot components and gave him a new head.

News Credits: 1642 · by **D-Maximal_Primal** » Sun Apr 03, 2016 10:53 pm

To round out our Technobot team, we finally bring to you the last member of the mighty Computron: Strafe! Strafe is an extensive retool of the Unite Warriors Blastoff mold, as compared to the Hasbro version which is a retooled Air Raid. The images were provided to use as always by Twitter user TFyuki and have been mirrored below for your enjoyment. Check out the images, and let us know what you think in the comments section below. And as always stay tuned to Seibertron.com for all your latest Transformers News and Galleries!

News Credits: 1642 · by **D-Maximal_Primal** » Sun Apr 03, 2016 10:56 pm

Now this one has me very unsure about this. I need to see the Hasbro version, but this one is just not sticking to me like Nosecone did. But it is still not bad by a long shot.

Hey Will: Now you can finish your spreadsheet! :MAXIMAL:

News Credits: 459 · by **Sabrblade** » Sun Apr 03, 2016 10:56 pm

Cheese and whiskers, he's Blast Off backwards! :shock:

News Credits: 226 · by **Burn** » Sun Apr 03, 2016 10:57 pm

Holy **** **** Takara! That is **** awesome! It's so **** awesome I'll break the **** swear filter!

Holy ****!
Holy ****!
Holy ****!
Holy ****!
Holy ****!

:-D

News Credits: 1642 · by **D-Maximal_Primal** » Sun Apr 03, 2016 10:57 pm

I think some Australian dude is very happy :lol:

News Credits: 13 · by **kurthy** » Sun Apr 03, 2016 10:59 pm

D-Maximus_Primal wrote:To round out our Technobot team, we finally bring to you the last member of the mighty Computron: Strafe! Strafe is an extensive retool of the Unite Warriors Blastoff mold, as compared to the Hasbro version which is a retooled Air Raid. The images were provided to use as always by Twitter user TFyuki and have been mirrored below for your enjoyment. Check out the images, and let us know what you think in the comments section below. And as always stay tuned to Seibertron.com for all your latest Transformers News and Galleries!

News Credits: 388 · by **Bounti76** » Sun Apr 03, 2016 11:00 pm

D-Maximus_Primal wrote:Now this one has me very unsure about this. I need to see the Hasbro version, but this one is just not sticking to me like Nosecone did. But it is still not bad by a long shot.

Hey Will: Now you can finish your spreadsheet!

I want to see Hasbro's, too, but this figure is AMAZING. The altmode is perfect, the robot mode is awesome. I can't even tell this is a Blast Off retool. It looks completely new. :shock:

News Credits: 226 · by **Burn** » Sun Apr 03, 2016 11:00 pm

D-Maximus_Primal wrote:I think some Australian dude is very happy

Seriously! That alt mode!

The only downside to this is I wish they'd done more with Lightspeed and Scattorshot.

News Credits: 65 · by **Wolfman Jake** » Sun Apr 03, 2016 11:02 pm

Sabrblade wrote:Cheese and whiskers, he's Blast Off backwards!

Off Blast?
Ffo Tsalb?
Muffle On?

News Credits: 1642 · by **D-Maximal_Primal** » Sun Apr 03, 2016 11:03 pm

Burn wrote:
D-Maximus_Primal wrote:I think some Australian dude is very happy

Seriously! That alt mode!

The only downside to this is I wish they'd done more with Lightspeed and Scattorshot.

Oh, I believe you!!

A little more to those 2 would have been nice, but at least with Scattershot we got the new chest and combiner head!

Also, I was literally watching TFYuki's twitter for almost a half hour waiting for that image. As soon as it showed, it was newsed. took only 4 minutes from him releasing the pic to me having it front paged

News Credits: 174 · by **Hellscream9999** » Sun Apr 03, 2016 11:03 pm

Love it, just hope TT doesn't screw him over with a drab paint job >:oP

(anticipates cancelling pre-order...)

News Credits: 1642 · by **D-Maximal_Primal** » Sun Apr 03, 2016 11:04 pm

Hellscream9999 wrote:Love it, just hope TT doesn't screw him over with a drab paint job

(anticipates cancelling pre-order...)

don't you dare anticipate cancelling that preorder. This is awesome! Computron has finally risen! I'm still unsure about this dude, but I feel confident that he will be awesome!

Now I really may need to get this one. Argh, this is making my wallet and my head hurt so much :MAXIMAL:

News Credits: 2 · by **Crosscheck** » Sun Apr 03, 2016 11:05 pm

Well, that seals the deal for me. Takara it is. I was looking for a way to get the Blast Off mold and here it is.

EDIT: And preorder at BBTS placed. $35 for a much better rendition of the figure is fine by me. Two molds I don't have.

MyFigureCollection.net collection · by **Emerje** » Sun Apr 03, 2016 11:07 pm

Sabrblade wrote:Cheese and whiskers, he's Blast Off backwards!

Do you remember what I said about possibly making a Movor out of a backwards Blast Off? Seems a little more plausible now.

Emerje

News Credits: 174 · by **Hellscream9999** » Sun Apr 03, 2016 11:10 pm

D-Maximus_Primal wrote:
Hellscream9999 wrote:Love it, just hope TT doesn't screw him over with a drab paint job

(anticipates cancelling pre-order...)

don't you dare anticipate cancelling that preorder. This is awesome! Computron has finally risen! I'm still unsure about this dude, but I feel confident that he will be awesome!

Now I really may need to get this one. Argh, this is making my wallet and my head hurt so much

Why? My figures have to actually look nice, that includes a well laid out deco, something TT has not done well for their last 4/5 combiners >:oP

News Credits: 9 · by **Sowndwave76** » Sun Apr 03, 2016 11:12 pm

I was feeling confident after the combined image of Comp was released, but now having seen each individual bot/alt mode, this UW set is a not-to-be-missed must have for me.

All of the bots look amazing.
Weakest alt mode imo is Afterburner, but the modification is okay.
I don't have (and won't get) Wheeljack, so the Lightspeed mold is cool with me.
I'm sure it's because it's unpainted, but in the collage images someone posted, it looks like the hood is less rounded on the sides compared to the Wheeljack mold.
Probably just from a slight difference in camera angle of the shots, but it does look more squared-off to me.

Anyway, can't wait to see color images.

I love all of those head sculpts!!!!