Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More

Wednesday, October 12th, 2016 10:20AM CDT

Category: Toy News
Posted by: LOST Cybertronian Views: 36,621

Topic Options: View Discussion · Sign in or Join to reply

Where should we even start? Our new expanded design team is kicking out mind-blowing sets this month!

First of all, the new set for TR Laserbeak is a demo set, so for now it retails for just ONE CENT. No kidding.
http://toyhax.com/for-titans-ret/2173-l ... rbeak.html

We also have an absurdly amazing set for TR Soundwave, including 3D speaker grills and dance floor:
http://toyhax.com/for-titans-ret/2172-l ... dwave.html

And lots more for the Titans line, including labels for Rumble, Chromedome and Highbrow:
http://toyhax.com/for-titans-ret/2194-l ... umble.html
http://toyhax.com/for-titans-ret/2185-l ... edome.html
http://toyhax.com/for-titans-ret/2184-l ... hbrow.html

We're not done with Combiner Wars either, so check out this set for the ENTIRE team of Technobots (All 7 of them!)
http://toyhax.com/for-comb-wars/2193-la ... utron.html

And wait... what's THIS!? You might want to get yourself another Combiner Wars Wheeljack:
http://toyhax.com/for-comb-wars/2175-la ... isher.html

And if you'd rather have some more G1 themed parts than just that CW weapon, you should see these:
http://toyhax.com/for-comb-wars/2189-pa ... ljack.html

Those same parts are also available as a package deal with the label set of your choosing:
http://toyhax.com/for-comb-wars/2190-pa ... isher.html
http://toyhax.com/for-comb-wars/2191-pa ... ljack.html

We've had a lot of requests for symbols more closely resembling the G1 cartoon design. So now you can get them in either "Cartoon Sloppy" or "Cartoon Clean" clear backed versions:
http://toyhax.com/symbols-for-tf/2177-c ... mbols.html
http://toyhax.com/symbols-for-tf/2180-c ... mbols.html

And because there are red Autobots and purple Decepticons, we have white outline versions of both:
http://toyhax.com/symbols-for-tf/2181-c ... lines.html
http://toyhax.com/symbols-for-tf/2182-c ... lines.html

Moving on to third party sets, we've completed the MTC Protectobots line with a set for Vulcan:
http://toyhax.com/standard-scale/2176-l ... ulcan.html

Omnigonix Spinout:
http://toyhax.com/mp-scale/2183-labels- ... inout.html

And finally, some truly huge finishing details for DX9 Gewalt:
http://toyhax.com/mp-scale/2192-labels-for-dx9-gewalt

Credit(s): Reprolabels.com

News Search

Got Transformers News? Let us know here!

Most Recent Transformers News

Transformers #22, GI Joe #9, Void Rivals, Spawn, Toxic Avenger + more in-stock at Seibertron Store

Posted 18 hours ago

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1832863)
Posted by SG Roadbuster on October 12th, 2016 @ 12:32pm CDT

and yet, still no Star Seeker faction symbols.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1833110)
Posted by Carnivius_Prime on October 13th, 2016 @ 4:33am CDT

Again actual accessories/parts as well as the usual stickers. I hope this continues. Hell, I'd love a full on service offering extra guns and small pieces to fill in hollow limbs and such.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1833139)
Posted by RiddlerJ on October 13th, 2016 @ 8:18am CDT

I'm liking those Wheeljack parts.

They really need to put out some extra parts for the CW Technobots.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840120)
Posted by Va'al on November 10th, 2016 @ 8:25am CST

A new update from the Reprolabels crew this month, featuring a lot of Transformers Titans Return sets to spruce up your figures. Check it all out below!

We have another impressive assortment this month, with labels for TR Astrotrain, Wolfwire and Mindwipe:
http://toyhax.com/for-titans-ret/2201-l ... train.html
http://toyhax.com/for-titans-ret/2207-l ... fwire.html
http://toyhax.com/for-titans-ret/2202-l ... dwipe.html

As well as a huge assortment of upgrades for the cassettes, starting with weapons for Laserbeak and Buzzsaw:
http://toyhax.com/for-titans-ret/2198-p ... rbeak.html
http://toyhax.com/for-titans-ret/2196-p ... zzsaw.html

And labels for Ravage, Stripes and Rewind:
http://toyhax.com/for-titans-ret/2213-l ... avage.html
http://toyhax.com/for-titans-ret/2210-l ... ripes.html
http://toyhax.com/for-titans-ret/2209-l ... ewind.html

A couple of brilliant conversion sets:
http://toyhax.com/for-comb-wars/2214-la ... allen.html
http://toyhax.com/for-titans-ret/2208-l ... ensor.html

And full sets for MP Sunstorm (2014 TRU version) and MP Loud Pedal:
http://toyhax.com/for-masterpiece/2211- ... storm.html
http://toyhax.com/for-masterpiece/2212- ... pedal.html

On the third party front, the Despotron and Mightron sets everyone has been clamoring for:
http://toyhax.com/mp-scale/2203-labels- ... htron.html
http://toyhax.com/mp-scale/2199-labels- ... otron.html

The next LER set:
http://toyhax.com/mp-scale/2206-labels- ... evero.html

And comprehensive sets for KFC's take on the Junkions:
http://toyhax.com/mp-scale/2205-labels- ... pyard.html
http://toyhax.com/mp-scale/2200-labels- ... shhog.html

Today is the final day you can add labels for TR Laserbeak to your cart for just one cent:
http://toyhax.com/for-titans-ret/2173-l ... rbeak.html

And finally, we're now offering free transparent backed white outline symbols, with every $20 you spend on labels for TFs:
http://reprolabels.com/

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840125)
Posted by Kurona on November 10th, 2016 @ 8:34am CST

Spensor is :lol:

I need two Rewinds now!

Those parts for Laserbeak and Buzzsaw make them look extremely good. Literally went from an 'eh, okay' to a 10. I even love that makeshift tank mode, it's amazing what a few extra parts and repros can do! Honestly completely blown away.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840128)
Posted by D-Maximal_Primal on November 10th, 2016 @ 8:37am CST

That Fallen though...

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840158)
Posted by Big Grim on November 10th, 2016 @ 9:36am CST

Kurona wrote:Spensor is I need two Rewinds now!

D-Maximus_Prime wrote:That Fallen though...

Agree with you both! Those are aces!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840162)
Posted by D-Maximal_Primal on November 10th, 2016 @ 9:42am CST

Big Grim wrote:
Kurona wrote:Spensor is I need two Rewinds now!

D-Maximus_Prime wrote:That Fallen though...

Agree with you both! Those are aces!

I didn't know Trailbreaker could look so evil!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840177)
Posted by SureShot18 on November 10th, 2016 @ 10:26am CST

That Fallen set looks so good. I think I'm going to have to buy a Wheeljack and Trailbraker soon.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840194)
Posted by SG Roadbuster on November 10th, 2016 @ 11:46am CST

still no Star Seeker Faction Symbols?

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840337)
Posted by Emerje on November 10th, 2016 @ 4:58pm CST

Fallen looks a little too scrawny for my liking.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1840451)
Posted by MGrotusque on November 11th, 2016 @ 12:30am CST

That Junkion set.... :shock:

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1848079)
Posted by Va'al on December 20th, 2016 @ 1:41pm CST

Happy holidays! We're celebrating with another ONE CENT demo set -- for Titans Return Brainstorm!
http://toyhax.com/for-titans-ret/2216-l ... storm.html

While you're at it, we have lots more new sets for TR figures:
http://toyhax.com/for-titans-ret/2217-l ... t-rod.html
http://toyhax.com/for-titans-ret/2236-l ... kaway.html
http://toyhax.com/for-titans-ret/2234-l ... prime.html
http://toyhax.com/for-titans-ret/2233-l ... ave-2.html
http://toyhax.com/for-titans-ret/2232-l ... ave-1.html

...Including another awesome conversion set to turn Buzzsaw into Sundor, complete with weapons:
http://toyhax.com/for-titans-ret/2223-p ... undor.html

On the third party side, we have awesome new sets for the Unique Toys triple changers:
http://toyhax.com/mp-scale/2231-labels- ... order.html
http://toyhax.com/mp-scale/2218-labels- ... allen.html

The final two sets for GT's Gravity Builder line:
http://toyhax.com/mp-scale/2229-labels- ... truck.html
http://toyhax.com/mp-scale/2228-labels- ... crane.html

TFC Hades jets:
http://toyhax.com/mp-scale/2227-labels- ... iakos.html
http://toyhax.com/mp-scale/2225-labels- ... nthus.html
http://toyhax.com/mp-scale/2226-labels- ... ypnos.html

The loooong overdue set for TW Infinitor (Worth the wait!):
http://toyhax.com/standard-scale/2221-l ... nitor.html

MMC OX Backdraft:
http://toyhax.com/mp-scale/2230-labels- ... draft.html

Iron Factory Blizzard:
http://toyhax.com/mini-scale/2222-label ... zzard.html

And last but not least (in any way), an epic set for the epic figure known as Maketoys Pandinus!:
http://toyhax.com/standard-scale/2235-l ... dinus.html

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1848085)
Posted by Carnivius_Prime on December 20th, 2016 @ 1:50pm CST

Ordered the Hot Rod set moments after I got the email. The much better contrasted hood flame is worth the 7 bucks alone plus I like all the G1 toy stickers and other bits. Also bought the Brainstorm stickers cos I maaaay own that Deluxe someday and for 1 cent I thought I may as well.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1848146)
Posted by Kurona on December 20th, 2016 @ 4:40pm CST

Really disappointed in that Breakaway set. Every inch of the figure is begging for more colour and we get some small details and a headmaster readout. Frustrating.

THAT SENTINEL SET THO! Holy heck is it incredible!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1848272)
Posted by Carnivius_Prime on December 21st, 2016 @ 2:02pm CST

Some weird timing here. Today my payment went through for several sticker sheets including Titans Hot Rod. And after checking my past Reprolabel Paypal receipts it seems tomorrow is 10 years exactly since I first bought Reprolabels. For CLASSICS Rodimus (Hot Rod)!
:michaelbay:

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852372)
Posted by LOST Cybertronian on January 14th, 2017 @ 1:42pm CST

Happy New Year! Here's the first Toyhax line up of 2017!

Leading the year off with an amazing sticker set for Titans Return Galvatron that gives the toy some much needed detail and highlights. Oh and we also decided to throw in brand new helmet parts!
http://toyhax.com/for-titans-ret/2244-p ... atron.html

For those of you who own Takara's Galvatron rest assured that you are not forgotten. We've made a version just for you:
http://toyhax.com/for-titans-ret/2245-p ... atron.html

Here we go! Wave 3 of the ever popular lineup of labels for Titan Masters:
http://toyhax.com/for-titans-ret/2246-l ... ave-3.html

Continuing our Deluxe releases is this impressive set for Triggerhappy:
http://toyhax.com/for-titans-ret/2250-l ... happy.html

We're pretty excited about this long awaited ankle biter. Our label set for TR GNAW!!
http://toyhax.com/for-titans-ret/2248-l ... -gnaw.html

Now for our third party releases:

We jump right in if a bit ahead of schedule with a gorgeous set for MT Downbeat:
http://toyhax.com/mp-scale/2243-labels- ... nbeat.html

Venturing back in MMC territory with a unique set for their Overlord figure, R17 Carnfex:
http://toyhax.com/standard-scale/2249-l ... rnfex.html

Great things do come in little packages... we had a lot of fun with IF Lord Scorpion!
http://toyhax.com/mini-scale/2247-label ... rpion.html

We are returning to the free outline symbols promo as well, and probably for the last time. You will receive a free set with every $20 you spend.

Finally, today will be the final day of the 1 cent offer for TR Brainstorm labels:
http://toyhax.com/for-titans-ret/2216-l ... storm.html

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852375)
Posted by fenrir72 on January 14th, 2017 @ 2:31pm CST

I might take the Galvatron helmet upgrade.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852388)
Posted by Targetmaster Kup on January 14th, 2017 @ 5:18pm CST

I love that they now make color matched parts as part of their upgrades. My Takara Galvatron mask broke, so I need this!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852389)
Posted by Kurona on January 14th, 2017 @ 5:19pm CST

Their helmets are incredible, and the Takara version looks even better. And that's not a sentence I find myself saying often.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852394)
Posted by Ironhidensh on January 14th, 2017 @ 6:37pm CST

Do I want to order that set for Downbeat before he is released?

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852401)
Posted by Emerje on January 14th, 2017 @ 8:53pm CST

The Galvatron helmet isn't bad, but I wish it didn't expose so much of the Titan Master around the face. Would look better without the visible gray areas I think. Kinda big, too, looks too much like a helmet on a helmet. Great idea, just wish it was smaller, still better than the original, though.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852453)
Posted by ScottyP on January 15th, 2017 @ 10:07am CST

That Galvatron set :shock:

Fantastic stuff!

Ironhidensh wrote:Do I want to order that set for Downbeat before he is released?

I'm on the fence with Downbeat (looks great but probably one of those "gets replaced by official in two years" things), and that set isn't helping my rational side win out.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852458)
Posted by Ironhidensh on January 15th, 2017 @ 10:50am CST

ScottyP wrote:That Galvatron set Fantastic stuff!

Ironhidensh wrote:Do I want to order that set for Downbeat before he is released?
I'm on the fence with Downbeat (looks great but probably one of those "gets replaced by official in two years" things), and that set isn't helping my rational side win out.

That's easy for me. Based on Shockwave and Inferno, I really don't like the direction the official line is taking for the G1 characters (I love the beasts though). At this point, I don't think Takara will produce something better than Downbeat. While I know on this site it isn't a popular opinion, official is just a word to me. 3rd party has surpassed takara.

*edit*
I read this after I posted and I feel it sounds snotty. That wasn't my intention. Sorry.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852470)
Posted by MGrotusque on January 15th, 2017 @ 1:18pm CST

Gnaw set adds the most significant difference in both modes out of this update. It's remarkable how much it enhances the figure.
Galvatron is next. The one sticker i wanted them to make is one covering the vents on his legs. I've used paint instead but it's rather if had a sticker.
Triggerhappy is my third fave of this update. Really makes the figure pop.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852788)
Posted by fenrir72 on January 16th, 2017 @ 11:42pm CST

Emerje wrote:The Galvatron helmet isn't bad, but I wish it didn't expose so much of the Titan Master around the face. Would look better without the visible gray areas I think. Kinda big, too, looks too much like a helmet on a helmet. Great idea, just wish it was smaller, still better than the original, though.

Emerje

How can it be smaller? :???:

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852798)
Posted by Emerje on January 17th, 2017 @ 3:13am CST

fenrir72 wrote:
Emerje wrote:The Galvatron helmet isn't bad, but I wish it didn't expose so much of the Titan Master around the face. Would look better without the visible gray areas I think. Kinda big, too, looks too much like a helmet on a helmet. Great idea, just wish it was smaller, still better than the original, though.

Emerje

How can it be smaller?

galvatronhax1.JPG

There is a lot of extra plastic there. I know they're trying to bulk it out to bring it up to Voyager size, but I think they went overboard on it.

galvatronhax2.JPG

Look at how far it hangs off the back, that's massive! And from the front with so much of the the Titan Master helmet exposed it just looks like Galvatron is wearing a helmet that doesn't really fit. For all of the original mask's shortcomings at least it covered more from the front.

Plus it's very bland compared to the rest of the figure.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852800)
Posted by fenrir72 on January 17th, 2017 @ 3:59am CST

Emerje wrote:
fenrir72 wrote:
Emerje wrote:The Galvatron helmet isn't bad, but I wish it didn't expose so much of the Titan Master around the face. Would look better without the visible gray areas I think. Kinda big, too, looks too much like a helmet on a helmet. Great idea, just wish it was smaller, still better than the original, though.

Emerje

How can it be smaller?

galvatronhax1.JPG

There is a lot of extra plastic there. I know they're trying to bulk it out to bring it up to Voyager size, but I think they went overboard on it.

galvatronhax2.JPG

Look at how far it hangs off the back, that's massive! And from the front with so much of the the Titan Master helmet exposed it just looks like Galvatron is wearing a helmet that doesn't really fit. For all of the original mask's shortcomings at least it covered more from the front.

Plus it's very bland compared to the rest of the figure.

Emerje

Bland, I agree. But the back part I feel is just right because of that extra stabilizing peg on the Headmaster's heel. They were probably trying to recreate the Studio Ox look. In a TVMag/ Mook, the back helmet looks very much like that.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852807)
Posted by Emerje on January 17th, 2017 @ 5:01am CST

They were going for the cartoon look where the front at the bottom is flat and the "horns" are connected across the top.

It doesn't really suit the rest of the figure, though, and it makes his face look small being so big.

I would have been fine with the back of the TM feet sticking out the bottom of the helmet, it wouldn't have been very noticeable.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852859)
Posted by Counterpunch on January 17th, 2017 @ 11:09am CST

I feel like Reprolabels is doing enough relevant stuff that this should become the official discussion thread.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1852924)
Posted by RodimusRex on January 17th, 2017 @ 6:03pm CST

I think one way to do it smaller while sticking to one color plastic would be to have something that involves taking a screwdriver to the Titan Master and removing the legs. Or replacement TM parts in purple. As a helmet that doesn't modify the underlying figure and a toon homage, they did well. You can wish it wasn't a toon homage or look at modifying the underlying figure. I wouldn't mind IDW or toy variants of this. Or mods that use a screwdriver on the TM or which simply add a face to the pop up crown.

Since I go for toon decos, this works for me. I wouldn't mind a toon chest kit, shoulder pads, fill-in pegs, and articulated hands.

The base figure is pretty good but I think it calls for all the 3rd party add-on love that WFC Grimlock or Wreck-Gar got.

Personally like having "official" figures but I like enhancement kits because I can mix and match or choose what to apply and what not to.

Mania King is too extreme for me. I like Sovereign but that's a bad fit for CHUG. I like CHUG with add-ins.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1853126)
Posted by Cobotron on January 18th, 2017 @ 10:59pm CST

Counterpunch wrote:I feel like Reprolabels is doing enough relevant stuff that this should become the official discussion thread.

Totally agree. I was shocked after searching that there wasn't one and had been debating off and on if I should start one. No need now.

And since the title says "and Pictures"...

This set blew my mind. An awesome idea and cranked this toy up to 11 for me.

I love that he has the Speed Planet emblem.

I rode the fence for years on Repros until this year. Always thought they were great, just never pulled the trigger. With sets like this, I'm so glad I took the plunge. Now I anxiously await updates from them.
The 3D stuff they're doing is exciting and I hope they keep it up.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1853155)
Posted by TF-fan kev777 on January 19th, 2017 @ 7:50am CST

Has anyone actually gotten the Galvatron helmet upgrade? I worry about the durability of the plastic, especially because it looks like you need to take it off and put it on every time you transform.

I got the Fallen sticker set with the faceplate. My first one arrive already broken in 3 pieces. This was more likely due to them packaging, it wrapped in foam and stuck in a simple envelope with the sticker sheets. The replacement arrived intact and was packaged much better, but parts of it were so small/thin that I was glad once I had it glued on so I wouldn't break it simply by handling it. I'm still extra careful around the head.

For Galvatron, I'm wondering if some of the extra bulk on the helmet is simply for strength, especially if you have to handle it every time you transform.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862034)
Posted by D-Maximal_Primal on February 22nd, 2017 @ 9:57am CST

We have a wide assortment of new sets for you this month, starting with sets for Titans Return Twinferno and Bumblebee:
http://toyhax.com/for-titans-ret/2268-l ... ferno.html
http://toyhax.com/for-titans-ret/2262-l ... lebee.html

As well as label sets for Takara's Legends Chromedome and Soundwave:
http://toyhax.com/for-titans-ret/2261-l ... dwave.html
http://toyhax.com/for-titans-ret/2260-l ... edome.html

The final 2 sets for our CW Pyrocons line are conversion sets for CW Scattershot and Air Raid, to turn them into our takes on Flame and Skyjack. Their combined form might also be familiar to you Beast Wars fans:
http://toyhax.com/for-comb-wars/2258-la ... flame.html
http://toyhax.com/for-comb-wars/2257-la ... yjack.html

And we've finally completed the largest endeavor we've ever worked on... a full upgrade set for G1 Fort Max:
http://toyhax.com/for-g1-bots/2251-upgr ... ximus.html

And since the set is compatible with the original factory supplied labels, we also have a package deal for the upgrade set and the repro set together:
http://toyhax.com/for-g1-bots/2252-upgr ... ximus.html

On the third party side, we have beautiful sets for KFC Simba and Opticlones:
http://toyhax.com/mp-scale/2263-labels- ... simba.html
http://toyhax.com/mp-scale/2264-labels- ... lones.html

Occular Max Girder and Terraegis:
http://toyhax.com/mp-scale/2259-labels- ... irder.html
http://toyhax.com/mp-scale/2266-labels- ... aegis.html

If you prefer Badcube's Speedbump, we have you covered:
http://toyhax.com/mp-scale/2265-labels- ... dbump.html

The final sets for TFC Hades, we have sets for Cerebus and Minos:
http://toyhax.com/mp-scale/2256-labels- ... rebus.html
http://toyhax.com/mp-scale/2255-labels- ... minos.html

As well as for the last two member's of FP Ryu-Oh, Dinogo and Dinoroku:
http://toyhax.com/standard-scale/2254-l ... inogo.html
http://toyhax.com/standard-scale/2253-l ... oroku.html

An extensive set for Fans Toys Lupus:
http://toyhax.com/mp-scale/2267-labels- ... lupus.html

We've also started work on sets for Playmates's Voltron: Legendary Defender line, beginning with Green Lion:
http://toyhax.com/mp-scale/2269-labels- ... -lion.html

Finally, we have a new free giveaway set! For every $15 you spend on TF labels, you will receive a set of 32 silver backed labels:
http://reprolabels.com

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862043)
Posted by Kurona on February 22nd, 2017 @ 10:16am CST

That Flame set is friggin' bizarre and I love it. Bit of a departure from the Tank form, but I appreciate the use of the big-gun-strapped-to-a-space-plane as an 'update' to that.

I also really love how well done the face sticker for Skyjack is, you wouldn't even know Air Raid's noggin is behind that.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862058)
Posted by Mkall on February 22nd, 2017 @ 10:59am CST

Now I'm gonna have to find a CW Scattorshot...

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862114)
Posted by Carnivius_Prime on February 22nd, 2017 @ 12:57pm CST

Man, those Fort Max stickers are expensive. On top of an already rich-kids toy figure.

I clicked Flame expecting the crazy Marvel Autobot guy from those zombie stories. I want a toy of him!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862143)
Posted by LOST Cybertronian on February 22nd, 2017 @ 2:01pm CST

Face stickers have not worked well for me in the past

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862175)
Posted by Emerje on February 22nd, 2017 @ 5:14pm CST

I kinda just want the window stickers for Fort Max, they're very striking in the alt modes.

The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.

Not crazy about Skyjack, that mold would have worked a lot better as Hooligan with enough orange stickers. Clever work with the head, though.

Flame is just weird and combining to form Inferno is just bizarre. I get the word play, but why not another Autobot like one of the Sparkabots? Guzzle would have been cool.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862176)
Posted by Cobotron on February 22nd, 2017 @ 5:18pm CST

Emerje wrote:The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.
Emerje

Do you have them? Are you speaking first hand? The set is on it's way to me, and I am on the fence about those speaker stickers. Excited to figure it out though.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862178)
Posted by Emerje on February 22nd, 2017 @ 5:21pm CST

Cobotron wrote:
Emerje wrote:The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.
Emerje

Do you have them? Are you speaking first hand? The set is on it's way to me, and I am on the fence about those speaker stickers. Excited to figure it out though.

'Friad not, I don't even have a Soundwave yet, just an observation.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862179)
Posted by Cobotron on February 22nd, 2017 @ 5:31pm CST

Emerje wrote:
Cobotron wrote:
Emerje wrote:The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.
Emerje

Do you have them? Are you speaking first hand? The set is on it's way to me, and I am on the fence about those speaker stickers. Excited to figure it out though.

'Friad not, I don't even have a Soundwave yet, just an observation.

Emerje

Mmmmmmm'kay. Hope you find Soundwave soon.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862222)
Posted by Ironhidensh on February 22nd, 2017 @ 7:36pm CST

Emerje wrote:
Cobotron wrote:
Emerje wrote:The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.
Emerje

Do you have them? Are you speaking first hand? The set is on it's way to me, and I am on the fence about those speaker stickers. Excited to figure it out though.

'Friad not, I don't even have a Soundwave yet, just an observation.

Emerje

Check your local target stores. They are lousy with soundwaves around here.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862237)
Posted by Black Bumblebee on February 22nd, 2017 @ 8:38pm CST

In general I love their stickers, and I even have their city upgrade for the G1 Metroplex. For me, and I don't know if this is anyone else, it seems the stickers for Fort Max seem a bit... cartoonish and out of place. Some seem great, such as the graffiti ones... but in general, there seems to be something just a bit "off" about the art. I dunno how else to express it.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1862246)
Posted by Emerje on February 22nd, 2017 @ 8:58pm CST

Cobotron wrote:
Emerje wrote:
Cobotron wrote:
Emerje wrote:The 3D stickers on Soundwave are phenomenal! I really love the look of the speakers with the honeycomb grill.
Emerje

Do you have them? Are you speaking first hand? The set is on it's way to me, and I am on the fence about those speaker stickers. Excited to figure it out though.

'Friad not, I don't even have a Soundwave yet, just an observation.

Emerje
Mmmmmmm'kay. Hope you find Soundwave soon.

Oh, no, I've found him a few times this week, but I bought Voyager Optimus instead.

Emerje

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1870905)
Posted by Kurona on April 1st, 2017 @ 8:28am CDT

This amazing new batch of labels is no joke!

New label sets for Titans Return toys Voyager Megatron, Voyager Optimus Prime and Sixshot:
http://toyhax.com/for-titans-ret/2278-l ... atron.html
http://toyhax.com/for-titans-ret/2279-l ... prime.html
http://toyhax.com/for-titans-ret/2277-l ... xshot.html

New G1-inspired weapons for Frenzy:
http://toyhax.com/for-titans-ret/2276-p ... renzy.html

A fantastic set for Masterpiece Inferno:
http://toyhax.com/for-masterpiece/2281- ... ferno.html

And a set for the entire CW Liokaiser:
http://toyhax.com/for-comb-wars/2280-la ... aiser.html

We also have this shockingly effective set for RID Ratchet:
http://toyhax.com/for-rid-prime/2273-la ... tchet.html

On the third party side of things, we have a full set for DX-9 Carry that also comes with a vehicle mode spoiler:
http://toyhax.com/mp-scale/2275-spoiler ... carry.html

A brilliant set for Maketoys Contact Shot:
http://toyhax.com/mp-scale/2282-labels- ... tshot.html

As well as our final set for Fans Toys Iron Dibots:
http://toyhax.com/mp-scale/2274-labels- ... inder.html

Lastly, we have three new sets for Voltron Legendary Defender toys. Of note is the Red Lion set has special pricing for anyone who wants to test the waters on these comprehensive lion sets:
http://toyhax.com/mp-scale/2270-labels- ... lion-.html
http://toyhax.com/mp-scale/2272-labels- ... lion-.html
http://toyhax.com/mp-scale/2271-labels- ... lion-.html

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1870907)
Posted by Kurona on April 1st, 2017 @ 8:39am CDT

Personally speaking I absolutely that Megatron set. Those WINGS! And of course, the obligatory Autobot symbol

Bloody hell though, Ratchet just kicks it out the park.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1870911)
Posted by Hero Alpha on April 1st, 2017 @ 9:44am CDT

Thanks for the new Kurona. Wish I would have waited a few days to place my order now. Just putting on Mindwipes as I read this.

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1870914)
Posted by Cobotron on April 1st, 2017 @ 10:08am CDT

Ahhhhh. I've been waiting for this update. Couldn't wait to see what they would do for Megatron. And it does not disapoint. I thought for sure they would do the G2 trailer for Prime though. Maybe because of Hasbro's deco for the Velocitron set they didn't? Oddly the set is giving off a movie vibe with those flames.

And YES! That Ratchet set is the bee's knees!

Just started labeling TR Hot Rod last night. He is looking HOT!

Re: Reprolabels October Update - Sets for Titans Return Soundwave, Laserbeak, Rumble, Combiner Wars Computron and More (1870918)
Posted by DeathReviews on April 1st, 2017 @ 11:53am CDT

I donno - the standard issue labels are already getting damaged under light handling. Putting more stickers on them could only lead to more shredding...

Click here to view additional comments about this topic ...