I-Gear Wrecker heads

Love the sculpts but isn't it the Wreckers not the Wreakers

That Pyro head better fit on Timelines Pyro/Spark or whatever.

Phaze wrote:Love the sculpts but isn't it the Wreckers not the Wreakers

Corrected.

I think I'm going to cry from the sheer awesomeness of these...

This is very cool. I can only assume (and hope) that iGear will also be producing the figures to go along with them. If their quality is anything like their Weapon and Medical Specialists, then these will be AWESOME! Here's to a future Wreckers army!

I think one of my questions has been answered about the iGear Ironhide and Ratchet photos.

Even if they just provide heads, so they could replace ball jointed heads that would be awesome!!!!!!

tigertracks 24 wrote:I think one of my questions has been answered about the iGear Ironhide and Ratchet photos.

Even if they just provide heads, so they could replace ball jointed heads that would be awesome!!!!!!

Would you be referring to the photo with the blurry additional heads??

If so, I'll agree with you that these were more than likely those heads. But if you're suggesting that iGear's attempt at a Wreckers team is just going to be clones of their Ironhide and Ratchet figure with different heads then I'm here to tell you that that is not going to happen.

Why???

Because I'd happily kill us all before I let that happen.

Sodan-1 wrote:

tigertracks 24 wrote:I think one of my questions has been answered about the iGear Ironhide and Ratchet photos.

Even if they just provide heads, so they could replace ball jointed heads that would be awesome!!!!!!

Would you be referring to the photo with the blurry additional heads??

If so, I'll agree with you that these were more than likely those heads. But if you're suggesting that iGear's attempt at a Wreckers team is just going to be clones of their Ironhide and Ratchet figure with different heads then I'm here to tell you that that is not going to happen.

Why???

Because I'd happily kill us all before I let that happen.

Option one was my assumption.

Where do I put these, exactly?

If it is just Ironhide/Ratchet clones, I'm out.

Lovely heads, but what about the bodies?

Yeah, SURELY they're giving more thought to the Wreckers than just slapping their heads on any-ole-body. Those bots (and vehicles) all look a lot different from Ironhide/Ratchet. Plus, we'll already have a COUPLE of that mold from just those two.

Guessing they'll either have real bodies for these bots that transform (hoping) OR recommendations from Classics to attach the heads to (and do our own repaints). I'd be happy with that, too.

WOULDN'T be happy with an army of Ratchets with wrong-heads.

I DOLOVE these sculpts. Can't imagine HasTak hasn't put these guys out yet proper.

I'm loving the heads so far, I'm just waiting to see what they do with them. I'd love to be able to have a true team of Wreckers at last, so I don't want to be disappointed.

gothsaurus wrote:...OR recommendations from Classics to attach the heads to (and do our own repaints). I'd be happy with that, too.

I wouldn't be happy with that! I can barely colour inbetween the lines of a colouring book, let alone paint my own Transformers.

These loo amazing. I'm trying not to get to excited but damn...I love me some Wreckers. Please, do not just be head sculpts...

Hmm, pretty cool, but I wouldn't know what to put them on if it's just a set of heads.

Sodan-1 wrote:

gothsaurus wrote:...OR recommendations from Classics to attach the heads to (and do our own repaints). I'd be happy with that, too.

I wouldn't be happy with that! I can barely colour inbetween the lines of a colouring book, let alone paint my own Transformers.

I agree. I could use Pyro on the classics Inferno mold and be ok with it but I foresee iGear giving us full figures. It's going to be a while though.

My money is on that they will be doing as many full figures as possible. I'd actually be fine with just a head replacement for Botcon Pyro however.

Oh yeah. We DID get Pyro that year, and we're getting Ironfist this year. Were any others ever reissued at Botcon? My memory is failing me.

I cannot stop looking at the pictures of these heads sculpts. They are so pretty..

It Is Him wrote:That Pyro head better fit on Timelines Pyro/Spark or whatever.

I don't think it will since it'll be hard finding figures for all of these heads (Especially Impactor) to go on, not to mention a lot of people don't really have that guy.

gothsaurus wrote:Oh yeah. We DID get Pyro that year, and we're getting Ironfist this year. Were any others ever reissued at Botcon? My memory is failing me.

No just those two.

Okay, with the massive assumption that heads are for those two... who could the remaining ones pair up with from classics. Guess we're hunting a tank and a helicopter. Hmmmmmmm. Lots of tanks to pick from, but not much in the way of a helicopter.

*pulls heads off figures*

Actually, what about those Energon combiners... and (heaven forbid) the FansProject Swindle!! *Snap*

I bet that Rotorstorm head will work with Tomahawk (an almost perfect match, except for... the legs), Guzzle goes with ROFT Brawn/RTS Fallback (no brainer) or PCC Heavytread (I doubt it), Pyro goes with Inferno if you don't have Spark, Ironfist goes with Classics Ratchet/Ironhide and really... this one's controversial, Impactor should go with Cybertron Downshift/Movie Big Daddy, the robot mode is spot-on, plus it's a cool vehicle mode but not a tank, in that case Darkmount but it doesn't fit with Impactor's robot or tank mode.

Yeah, I'd hate it if they mixed series. Classics and movie toys are so different. (Yeah, I'm talking about YOU chicken legs.)

bawk?

Yeah, not sure I've seen many TFs that have screamed out to me that they were any of these characters (well, not the colours anyway). Outside of Botcon Pyro of course.

I hope we'll we'll see newly designed figures for them. My wallet hopes not.

craggy wrote:bawk?

Yeah, not sure I've seen many TFs that have screamed out to me that they were any of these characters (well, not the colours anyway). Outside of Botcon Pyro of course.

I hope we'll we'll see newly designed figures for them. My wallet hopes not.

There's now a Cyberverse Guzzle that could use that head.

Skyhammer might look good with the ROtorstorm head, or the TT Vortex.

PLEASE JUST PLEASE, release the figures, not just the heads. Bayformers would look ridiculous with these heads and classics don't really have proper forms.

Impactor: Here's a good one, Armada Smokescreen. As I recall, Transtopia did one, but one shoulder cannon, a tank possible if you remoce the crane.

tigertracks 24 wrote:There's now a Cyberverse Guzzle that could use that head.

You can't really swap the heads with the Cyberverse Guzzle, since his head is molded in and not removable, not to mention these were announced before Cyberverse Guzzle.

tigertracks 24 wrote:

craggy wrote:bawk?

Yeah, not sure I've seen many TFs that have screamed out to me that they were any of these characters (well, not the colours anyway). Outside of Botcon Pyro of course.

I hope we'll we'll see newly designed figures for them. My wallet hopes not.

There's now a Cyberverse Guzzle that could use that head.

Skyhammer might look good with the ROtorstorm head, or the TT Vortex.

Guzzle is the right colours, sure but any of the others are going to need some serious repainting too, and that's a little much for me. It also limits the product, turning it from a 3rd party add-on to a customiser accessory. I don't see them doing that. I suppose the heads could have their colours reworked to fit on existing bodies, but then what's the point of choosing recognisable characters?

Flashwave wrote:Impactor: Here's a good one, Armada Smokescreen. As I recall, Transtopia did one, but one shoulder cannon, a tank possible if you remoce the crane.

Yeah, he does look like Impactor in vehicle mode if you remove the crane.

Third party toy maker iGear has revealed their take on Impactor of Wreckers' fame. The figure is dubbed Presser and appears to borrow some design elements from Generations Warpath. Take a look at the promotional artwork below from their facebook page.

I'll buy it!

Looks like a slightly modified Warpath mold.

Man, if iGear can keep all these promises the Golden Age of Transformers is truly upon us.

That is cool but I no idea who presser is. I hope the figure is classics scale and not MP.

Golden age is right!

Twitchythe3rd wrote:Looks like a slightly modified Warpath mold.

That's exactly what I thought. Oh well, it's a pass anyway because I can never afford iGear products.

Rated X wrote:That is cool but I no idea who presser is. I hope the figure is classics scale and not MP.

AS the article says it is 'Not Impactor' of Wreckers fame. Star of Last Stand of the Wreckers comics, made famous originally for appearances in Marvel's UK TF series.

Looks like a badass combination of the Crossover Hulk and Generations Warpath.

This Impactor looks very impressive. Here's hoping I can fit him in my budget. I would love to start completing my set of Wreckers.

Will definitely, 100% buying THIS guy!! Absolutely love him. Just WOW!

Definitely has similarities to Warpath, but also different enough. Kudos. I'm hoping he will be about their Ironhide size. I'd like my not-Impactor to be a voyager.

Certainly saves me the trouble of having to repaint Warpath into a Classics Impactor. Oh, wait, that's right - I'd have to be able to find a Warpath first . . . Hasbro.

Prime Evil wrote:Will definitely, 100% buying THIS guy!! Absolutely love him. Just WOW!

Definitely has similarities to Warpath, but also different enough. Kudos. I'm hoping he will be about their Ironhide size. I'd like my not-Impactor to be a voyager.

Well, with no generations figure reveals at Botcon, looks like all my money is going 3rd party, just like you PE!

We need some size comparisons, but this could be a real oppertunity for iGear to get neck and neck with FP, if they price things right, and depending if this is through them or through BBTS.

MINE!

This is fantastic! I hate to say it but iGear is making me a believer. These recent reveals look top notch.

amcgrath929 wrote:This is fantastic! I hate to say it but iGear is making me a believer. These recent reveals look top notch.

Same here. I've been pretty hard on iGear over the last few years, but I'm warming up if they keep doing figures like this.

This figure looks cool i need to see more pics before i settle on him

Sold!

I've actually been a fan of the iGear stuff so far, and I'm looking forward to what they do here.

It looks like iGear and FansProject will be taking all of my money for figures this year. Color me impressed.