Listing for Movie Masterpiece Brawl Found

2007 movie cast completion in sight!!!!

Getting Brawl in 2024 will be a great treat. Idk if I'd get any more MPMs after the 2007 cast thanks to Studio Series covering the other movies but we'll see

The concept art always looked amazing. But I have been almost universally disappointed by every figure made based on this bayverse design. They've been overly fiddly, a chore to transform, frustrating to handle, and they pose like a block of pig iron. The MP version would have to do a heckuvva lot to dispel the foul stench that all the other versions of Bayverse Brawl have left in the air.

DeathReviews wrote:The concept art always looked amazing. But I have been almost universally disappointed by every figure made based on this bayverse design. They've been overly fiddly, a chore to transform, frustrating to handle, and they pose like a block of pig iron. The MP version would have to do a heckuvva lot to dispel the foul stench that all the other versions of Bayverse Brawl have left in the air.

Does that apply to the studio series release? I always thought that was a solid figure.

Cheesinator wrote:Does that apply to the studio series release? I always thought that was a solid figure.

Besides the turret tail, the Studio Series one is pretty great! Not only fun but also very screen accurate.

And while it isn't as screen accurate, the 07 leader class figure is an absolute blast!

With the repaints they've done of Ratchet and Starscream, I wonder if we'll get a tan desert deco of this figure for the one that appears in DOTM. We need that in Studio Series too!

EvasionModeBumblebee wrote:

Cheesinator wrote:Does that apply to the studio series release? I always thought that was a solid figure.

Besides the turret tail, the Studio Series one is pretty great! Not only fun but also very screen accurate.

And while it isn't as screen accurate, the 07 leader class figure is an absolute blast!

With the repaints they've done of Ratchet and Starscream, I wonder if we'll get a tan desert deco of this figure for the one that appears in DOTM. We need that in Studio Series too!

Funny thing is, Brawl is one of those characters where I'd say that, outside of his 07 deluxe arm connections in robot mode, he really hasn't had a bad toy. Nothing amazing (except maybe leader class), but he's always solid

Does that apply to the studio series release? I always thought that was a solid figure.

I had SS Brawl for a while, and even reviewed it. But I grew weary of it and had the minions sell it off, for the reasons listed above. I dreaded transforming the thing because of the way you have to wrestle with the chest and the turret sections. And they make you stop transforming some areas mid-way through, so you can transform other areas, and shuffle back and forth between zones. It was just too much work. And in the end, you still couldn't pose it very well. The legs were especially frustrating. Not nearly as bad as the Leader 2007 figure, but close...

But those are my opinions - I'm sure other folks enjoy these figures and I won't take that away from them. I'm just saying that unless MP Brawl does something really amazing to step away from those past issues, I won't be tempted. And I have my doubts, because MP figures in general are really advanced and they often wind up magnifying the frustration rather than easing it.

MPM-15 gets revealed this Friday! Can’t wait to see how he looks!

EvasionModeBumblebee wrote:MPM-15 gets revealed this Friday! Can’t wait to see how he looks!

IMG_2036.jpeg

I was literally looking at this thread last night wondering whatever happened to this.

Emerje

MPM-15 Brawl has been revealed! He includes multiple blast effect accessories, an opening jaw, and a severed left arm stump!

Oh he's beautiful!

We thank EvasionModeBumblebee for letting us know that Transformers MPM-15 Brawl has been revealed! He includes multiple blast effect accessories, an opening jaw, and a severed left arm stump! Below are images along with an English translation of the Chinese description.

Transformers MPM15 Movie Masterpiece: Decepticon Brawl

The Decepticons gather as the noise mounts! The crushing obstacles of “Movie Masterpiece MPM-15 Brawl” have arrived!

Brawl, the unstoppable tank; Brawl, the offensive pioneer with a warlike nature; Brawl is the firepower on Cybertron!

Originally a member of the G1 fleet of animated battle tanks in the ’80s, Brawl made its debut in a new guise in the live-action Transformers movie over 20 years later!

Restore the shape of the film’s M1 main battle tank, with 76 steps to complete the transformation and a rich configuration of weapon accessories!

The weapons can even restore the image of the explosion and break-up in the film, with camouflage paint full of layered feel, and highly reproducible special effects replacement parts for intense exit scenes, perfectly reproducing the film’s classic look!

Note: some product instructions will be found in the packaging insert, please look carefully for players receiving the goods.

Set includes: shoulder-mounted missile launcher, arm-mounted machine gun, chest combat damage parts, flame special effects parts

Applicable age: 8 years and over

Product material: plastic

Model: F9655

Nice! I shall wait for a HUGE discount sale like I did with Blackout and Bonecrusher.

This is magnificent. Absolutely magnificent.

The figure looks excellent. But it lists 79 transformation steps. I've had several of the movie Brawl/Devastator tank figures over the course of years. The 2007 Deluxe figure. The 2008 Leader figure. The Studio Series Voyager. Because I like a good tank figure, and the movie figure looked pretty neat. However, as time went by, I let go of each one, either selling or giving them away.

And the transformations were the main reason. They were just too fussy, too fiddly, too complicated. The engineering necessary to get the tank figure to turn into the robot figure required too much effort IMO, and I felt it made it so the figures weren't any fun.

Secondly, the robot modes were too encumbered to get decent poses. In most cases, the articulation points were all there, so there was great potential for good posing. But there was so much parts crashing that the poses couldn't actually be achieved.

And while this MP Brawl does look amazing, it also looks as of both those issues would be front and center. So unless I saw it on deep discount, it's most likely a regretful pass.

Solrac333 wrote:Nice! I shall wait for a HUGE discount sale like I did with Blackout and Bonecrusher.

Still waiting for this yet to happen Bonecrusher sale...


As for Brawl, how much will it cost? Same as Bony?

DeathReviews wrote:The figure looks excellent. But it lists 79 transformation steps. I've had several of the movie Brawl/Devastator tank figures over the course of years. The 2007 Deluxe figure. The 2008 Leader figure. The Studio Series Voyager. Because I like a good tank figure, and the movie figure looked pretty neat. However, as time went by, I let go of each one, either selling or giving them away.

And the transformations were the main reason. They were just too fussy, too fiddly, too complicated. The engineering necessary to get the tank figure to turn into the robot figure required too much effort IMO, and I felt it made it so the figures weren't any fun.

Secondly, the robot modes were too encumbered to get decent poses. In most cases, the articulation points were all there, so there was great potential for good posing. But there was so much parts crashing that the poses couldn't actually be achieved.

And while this MP Brawl does look amazing, it also looks as of both those issues would be front and center. So unless I saw it on deep discount, it's most likely a regretful pass.

Are you me?

Because I did the same with the same reasons.

Even if that MPM Brawl look nice, I doubt I'll ever buy him.

And if Bonecrusher serves as an example, I doubt it will ever go on clearance because of the limited number produced.

-Kanrabat- wrote:

Solrac333 wrote:Nice! I shall wait for a HUGE discount sale like I did with Blackout and Bonecrusher.

Still waiting for this yet to happen Bonecrusher sale...

The benefit of him being a Target exclusive here is we get to use their random toy and Transformers specific sales on him to get $25 or 30% off him even during pre-order. I paid $140 for my Bonecrusher, others were able to get better deals with earned gift cards.

As for Brawl, how much will it cost? Same as Bony?

He'll probably be at the $165 price point at Target like Bonecrusher and Blackout were despite being drastically different sized figures. Not sure how that translates for you.

Emerje

Emerje wrote:He'll probably be at the $165 price point at Target like Bonecrusher and Blackout were despite being drastically different sized figures. Not sure how that translates for you.

Emerje

As expected.

So that mean that translate to: "Wait for a sale to buy, and if he's never on sale and disappear, eh..."

Sam Smith has returned, looks like we have another post from him on the way! Can’t wait, these posts he does are awesome.

EvasionModeBumblebee wrote:Sam Smith has returned, looks like we have another post from him on the way! Can’t wait, these posts he does are awesome.

IMG_2061.jpeg

Kinda funny that he's addressing this before they've done a western announcement. I guess that means a Target listing is eminent.

Emerje

Ooooooohhh baby he looks awesome! Best one since the '07 leader class one!

Emerje wrote:

EvasionModeBumblebee wrote:Sam Smith has returned, looks like we have another post from him on the way! Can’t wait, these posts he does are awesome.

IMG_2061.jpeg

Kinda funny that he's addressing this before they've done a western announcement. I guess that means a Target listing is eminent.

Emerje

Well this was a Hasbro announcement and not a Takara one, so I guess they consider it fair game.

william-james88 wrote:

Emerje wrote:

EvasionModeBumblebee wrote:Sam Smith has returned, looks like we have another post from him on the way! Can’t wait, these posts he does are awesome.

IMG_2061.jpeg

Kinda funny that he's addressing this before they've done a western announcement. I guess that means a Target listing is eminent.

Emerje

Well this was a Hasbro announcement and not a Takara one, so I guess they consider it fair game.

That's why I said "western announcement". Back when they announced Tidal Wave in Singapore last year it took them at least a month to acknowledge it outside of the event.

Emerje

I love that like Bonecrusher with his messed up face, Brawl includes the arm severing. I just love that detail so much

D-Maximal_Primal wrote:I love that like Bonecrusher with his messed up face, Brawl includes the arm severing. I just love that detail so much

I've said this before and I'll say it again: Optimus Prime 2.0 please! I passed on him because I didn't feel it did anything than the Leader class retail figure did so MB-11 is my stand in MPM until Hasbro does something better. And I know they can do better. Heck, Takara Tomy did better with their MPM release. But with Brawl being so impressive that he barely looks like he transforms (from the front anyway) in either mode I'd love to see what kind of amazing engineering wizardry they could pull off on a second try.

Emerje

Sam Smith’s posts on MPM Brawl are up! We get lots of looks at the scale breakdown, development process, and 3D turnarounds!

We also get some insights on the color scheme, the tank in the film was painted with 3 different house paint colors, and Sam got the exact paint colors to use on the figure!

https://www.instagram.com/king_samlock? ... c3dXgyZmUw

He is going to be a beautiful chunkster!

The original is much more thin.

Guess all that tank kibble must go somewhere, even for a MP.

-Kanrabat- wrote:The original is much more thin.

Guess all that tank kibble must go somewhere, even for a MP.

Honestly think he looks better in toy form. Just filling out the arms really makes a difference.

Emerje

The CG model there is also missing the arm weapons, which bulk him up quite a bit.

I love that Sam does these posts. There’s so much passion that goes into making these figures and it’s really cool to get to see some of that!